Opens in a new tab

CD4017BE

CMOS Johnson decade counter, 10 decoded outputs, Schmitt clock, PDIP-16

8000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4017BE

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4017BE from Texas Instruments is a CMOS 5-stage Johnson decade counter with 10 decoded outputs, Schmitt-trigger clock input, and carry-out for cascading, operating from 3V to 18V in a PDIP-16 package.

Key Specifications

Type 5-stage Johnson decade counter
Decoded Outputs 10 (Q0-Q9, active HIGH, one at a time)
Supply Voltage 3V to 18V
Clock Frequency 10MHz typical @ VDD=10V
Clock Trigger Positive edge (rising)
Schmitt Trigger on Clock Yes (unlimited rise/fall time)
Clock Inhibit Active HIGH (stops counting)
Reset Active HIGH (asynchronous, clears to Q0)
Carry Out 1 pulse per 10 clock cycles (for cascading)
Output Current 1.5mA source/sink @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • 10 decoded outputs — only one HIGH at a time
  • Johnson counter architecture — spike-free outputs
  • Schmitt trigger clock input — no rise/fall time restriction
  • Anti-lock gating ensures proper counting sequence
  • Carry-out for multi-stage cascading
  • Fully static operation — no minimum clock frequency
  • Wide supply range: 3V to 18V

Applications

  • LED chaser / sequential lighting
  • Frequency division (divide by N)
  • Decimal counting and display
  • Timer and sequencer circuits
  • Counter control applications
Product Introduction: CD4017BE Product Introduction

The CD4017BE from Texas Instruments is a 5-stage Johnson (twisted-ring) counter with 10 decoded active-HIGH outputs. On each rising edge of the clock, the counter advances to the next state, and the corresponding decoded output goes HIGH while all others remain LOW. The Johnson counter architecture guarantees spike-free decoded outputs because only one bit changes per clock cycle (unlike binary counters where multiple bits can change simultaneously). The Schmitt-trigger clock input allows unlimited clock rise and fall times, making it compatible with slowly-varying signals from RC oscillators or mechanical switches. The clock inhibit pin (active HIGH) stops counting without resetting; the reset pin (active HIGH) clears the counter to state 0. The carry-out (CO) pin produces one pulse for every 10 clock pulses and connects to the clock input of the next CD4017BE for multi-decade counting. The BE suffix denotes the PDIP-16 plastic package with full military temperature range (-55°C to +125°C).

Working Principle: CD4017BE Working Principle

The CD4017BE uses a 5-stage Johnson (twisted-ring) counter consisting of five D flip-flops with the complement of the last stage fed back to the first stage input. A 5-stage Johnson counter has 2×5=10 valid states, each corresponding to one of the 10 decoded outputs. On each rising clock edge (when clock inhibit is LOW), the counter shifts by one position: if Q4 was 0, it shifts a 1 in from the left; if Q4 was 1, it shifts a 0 in. This creates the sequence: 00000, 10000, 11000, 11100, 11110, 11111, 01111, 00111, 00011, 00001, then back to 00000. A 10-input OR-equivalent decoder maps each of these 10 states to one of the Q0-Q9 outputs. Because only one flip-flop changes state per clock cycle, the decoded outputs are always glitch-free. Anti-lock gating prevents the counter from entering any of the 22 invalid states (5 flip-flops have 32 total states, only 10 are valid). If power-up or noise causes an invalid state, the anti-lock logic forces it back into the valid counting sequence within a few clock cycles. The carry-out is simply Q4 AND NOT-Q5 (or the equivalent), producing a pulse that is HIGH for the first 5 clock cycles and LOW for the last 5, giving one complete pulse per 10 input clocks.

Pin Description: CD4017BE Pin Definition and Functions
Pin Name Type Description
1 Q5 Output Decoded output 5 (active HIGH)
2 Q1 Output Decoded output 1 (active HIGH)
3 Q0 Output Decoded output 0 (active HIGH, default after reset)
4 Q2 Output Decoded output 2 (active HIGH)
5 Q6 Output Decoded output 6 (active HIGH)
6 Q7 Output Decoded output 7 (active HIGH)
7 Q3 Output Decoded output 3 (active HIGH)
8 VSS Power Ground (0V)
9 Q8 Output Decoded output 8 (active HIGH)
10 Q4 Output Decoded output 4 (active HIGH)
11 Q9 Output Decoded output 9 (active HIGH)
12 CO Output Carry-out (1 pulse per 10 clocks, for cascading)
13 CLK INH Input Clock inhibit (HIGH = stop counting)
14 CLK Input Clock input (rising edge triggered, Schmitt)
15 RST Input Reset (active HIGH, clears to Q0)
16 VDD Power Positive supply (3V to 18V)
Application Scenarios: In which products and applications is CD4017BE used
  • LED Chaser: CLK from NE555 oscillator; Q0-Q9 drive 10 LEDs; each LED on for one clock period; creates classic Knight Rider effect
  • Divide-by-N: Connect Q(N) to RST; counter counts 0 to N-1 then resets; CO or Q(N-1) gives divide-by-N output
  • Cascaded Counter: CO of first 4017 → CLK of second; first counts 0-9, second counts 10-99; 100 states from two chips
  • Sequencer: Each Q output enables a different circuit stage; CLK steps through sequence; CLK INH pauses
  • Touch Switch: 4017 with Q0 and Q1 driving relay; each touch toggles CLK; alternates between on (Q1) and off (Q0)
Alternative Models: What chips are recommended as replacements for CD4017BE
Model Manufacturer Key Difference Package Supply
CD4017BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4017BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4017BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144017BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC4017D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC4017N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT4017D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4017 is the CMOS 4000-series decade counter/divider with decoded output operating over the wide 3-18V supply range. The HEF4017 (NXP) and MC144017 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4017 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1