Opens in a new tab

SN74LS10N

Triple 3-input NAND gate, LS TTL, 12ns, PDIP-14

5000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS10N

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS10N from Texas Instruments is a triple 3-input positive NAND gate with LS TTL technology, 12ns propagation delay, and industry-standard 7410 pinout in a 14-pin PDIP package.

Key Specifications

Number of Gates 3 (triple 3-input NAND)
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V (5V nominal)
Propagation Delay 12ns typical @ 5V
Output Drive (IOL/IOH) 8mA / -0.4mA
Operating Temperature 0°C to +70°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Three independent 3-input NAND gates
  • LS TTL technology
  • 12ns typical propagation delay
  • Industry-standard 7410 pinout

Applications

  • 3-input majority logic
  • Active-low signal combination
  • Address decoding
  • General-purpose combinational logic
Product Introduction: SN74LS10N Product Introduction

The SN74LS10N from Texas Instruments contains three independent 3-input NAND gates in a 14-pin PDIP package. Each gate performs Y = NOT(A AND B AND C); the output is LOW only when ALL three inputs are HIGH. The 3-input NAND is essential for majority logic and multi-condition gating where an action requires multiple conditions to be met simultaneously. Unlike the 2-input 7400, the 7410 tests for conjunction of three signals, useful in address decoding where three address lines must all be HIGH to select a particular memory range. The N suffix denotes the PDIP-14 through-hole package.

Working Principle: SN74LS10N Working Principle

Each 3-input NAND gate in the SN74LS10N performs Y = A NAND B NAND C = NOT(A AND B AND C). The truth table has 8 entries: the output is LOW only for the single case A=B=C=HIGH (111→0); for all other 7 input combinations, the output is HIGH. This makes the 3-input NAND a natural majority detector with inverted output: it detects when all three inputs agree (are HIGH). For an active-LOW AND (output goes LOW when all inputs are HIGH), the 3-input NAND is used directly. For a 3-input AND (output goes HIGH when all inputs are HIGH), add an inverter after the NAND, or use one gate of a 7404. For majority logic (output HIGH when 2 or more of 3 inputs are HIGH), a more complex circuit using multiple gates is needed.

Pin Description: SN74LS10N Pin Definition and Functions
Pin Name Type Description
1 1A Input Gate 1 input A
2 1B Input Gate 1 input B
3 2A Input Gate 2 input A
4 2B Input Gate 2 input B
5 2C Input Gate 2 input C
6 2Y Output Gate 2 output (NAND)
7 GND Power Ground
8 3Y Output Gate 3 output (NAND)
9 3A Input Gate 3 input A
10 3B Input Gate 3 input B
11 3C Input Gate 3 input C
12 1Y Output Gate 1 output (NAND)
13 1C Input Gate 1 input C
14 VCC Power Supply (4.75V to 5.25V)
Application Scenarios: In which products and applications is SN74LS10N used
  • 3-Condition Gate: Output LOW only when all 3 conditions (inputs) are HIGH; e.g., chip select = /CS when A15=A14=A13=1
  • 3-Input AND: NAND gate + inverter; Y = A AND B AND C; all three must be HIGH for HIGH output
  • Address Decode: Three high-order address bits → 3-input NAND; output LOW when specific address range selected
  • Strobe Gate: Data signal on one input, two enable signals on others; output active only when both enables HIGH
Alternative Models: What chips are recommended as replacements for SN74LS10N
Model Manufacturer Key Difference Package Supply
74LS10N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-14 5V TTL
74LS10D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-14 5V TTL
74HC10D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-14 2-6V CMOS
74HC10N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-14 2-6V CMOS
74HCT10D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-14 4.5-5.5V TTL-in
74HCT10N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-14 4.5-5.5V TTL-in
74AC10D TI/Nexperia Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC) SOIC-14 2-6V CMOS
74AC10N TI/Nexperia Through-hole DIP version of AC family for prototyping and repair DIP-14 2-6V CMOS

The 7410 is a Triple 3-Input NAND Gate. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1