Opens in a new tab

CD4026BE

Decade counter + 7-segment decoder, drives LED display, PDIP-16

4000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4026BE

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4026BE from Texas Instruments is a CMOS decade counter/divider with 7-segment decoded outputs, designed to directly drive common-cathode LED displays without external decoding logic in a 16-pin PDIP package.

Key Specifications

Type Decade counter with 7-segment decoder
Supply Voltage 3V to 18V
Clock Frequency 8MHz typical @ VDD=10V
Outputs 7 decoded segment outputs (a-g) + Carry Out
Display Enable Active HIGH; LOW blanks display
Display Enable Out Goes LOW on count 2 (for ripple blanking)
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Decade counter + 7-segment decoder in one IC
  • Directly drives common-cathode LED displays
  • Display enable for blanking
  • Ripple blanking for leading-zero suppression
  • Carry out for cascading multiple digits
  • CMOS 4000B series: 3V-18V operation

Applications

  • Digital counter with LED display
  • Frequency counter display
  • Event counter
  • Scoreboard display
Product Introduction: CD4026BE Product Introduction

The CD4026BE from Texas Instruments combines a decade counter and a 7-segment decoder/driver in a single 16-pin CMOS IC. On each rising clock edge, the counter advances and the 7-segment outputs (a through g) update to display the current count (0-9) on a common-cathode LED display. This eliminates the need for a separate BCD-to-7-segment decoder like the CD4511. The Display Enable In (DEI) pin controls whether the segment outputs are active; when LOW, all segments are blanked (off), allowing display multiplexing or intentional blanking. The Display Enable Out (DEO) goes LOW when the count reaches 2, which is used for ripple blanking: connecting DEO of a higher-order digit to DEI of the next lower digit causes leading zeros to be blanked (a count of 005 displays as ‘ 5’). The Carry Out (CO) produces one pulse per 10 clock cycles for cascading to the next digit. The BE suffix denotes the PDIP-16 package with full temperature range.

Working Principle: CD4026BE Working Principle

The CD4026BE contains a 5-stage Johnson counter (similar to the CD4017) followed by a combinational decoder that converts the counter state to 7-segment format. The Johnson counter has 10 valid states, each corresponding to digits 0-9. The decoder maps each state to the appropriate combination of segment outputs a-g. For example, digit 0 activates segments a, b, c, d, e, f (but not g); digit 1 activates b, c only; digit 8 activates all segments. The Display Enable In (DEI) gate controls the segment outputs: when DEI is HIGH, the segments drive normally; when DEI is LOW, all segment outputs go to the inactive state (LOW for common-cathode drive). The Clock input has Schmitt-trigger action for unlimited rise/fall times. The Ripple Blanking feature works as follows: DEO goes LOW when the count is between 0 and 1 (not during 2-9). When DEO of a tens digit connects to DEI of a units digit, both digits display zeros only when the tens digit is 2 or higher; for counts 00 and 01, both are blanked. For a 3-digit display, cascade the hundreds DEO to tens DEI, and tens DEO to units DEI.

Pin Description: CD4026BE Pin Definition and Functions
Pin Name Type Description
1 CLK Input Clock input (rising edge, Schmitt trigger)
2 DEI Input Display enable in (HIGH=display on, LOW=blanked)
3 DEO Output Display enable out (LOW during counts 0-1, for ripple blanking)
4 e Output Segment e output
5 d Output Segment d output
6 CO Output Carry out (1 pulse per 10 clocks, for cascading)
7 c Output Segment c output
8 VSS Power Ground (0V)
9 b Output Segment b output
10 g Output Segment g output
11 f Output Segment f output
12 a Output Segment a output
13 RST Input Reset (active HIGH, clears to 0)
14 CLK INH Input Clock inhibit (HIGH=stop counting)
15 OUT 7 Output Divided-by-5 output (for CD4022 compatibility)
16 VDD Power Positive supply (3V to 18V)
Application Scenarios: In which products and applications is CD4026BE used
  • 2-Digit Counter: NE555 oscillator → CD4026BE #1 CLK; CO → CD4026BE #2 CLK; each drives one 7-segment display; counts 00-99
  • Frequency Counter: Input signal through gate → CD4026BE; 1-second gate time; display shows frequency in Hz
  • Ripple Blank 3-Digit: Hundreds DEO → Tens DEI; Tens DEO → Units DEI; display ‘ 5’ instead of ‘005’
  • Event Counter: Sensor pulse → CD4026BE CLK; display shows event count; RST button to clear
Alternative Models: What chips are recommended as replacements for CD4026BE
Model Manufacturer Key Difference Package Supply
CD4026BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4026BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4026BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144026BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC4026D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC4026N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT4026D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4026 is the CMOS 4000-series decade counter/divider with 7-segment output operating over the wide 3-18V supply range. The HEF4026 (NXP) and MC144026 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4026 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1