Opens in a new tab

SN74LS194N

4-bit bidirectional universal shift register, LS TTL, PDIP-16

3500

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS194N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS194N from Texas Instruments is a 4-bit bidirectional universal shift register with parallel load, serial shift left/right, and synchronous mode control in a 16-pin PDIP package.

Key Specifications

Function 4-bit bidirectional universal shift register
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Modes Inhibit, Shift Right, Shift Left, Parallel Load
Mode Control S0 and S1 pins (2-bit select)
Serial Inputs SR SER (shift right), SL SER (shift left)
Parallel Inputs A, B, C, D
Outputs QA, QB, QC, QD
Clear Asynchronous, active LOW
Max Clock Frequency 25MHz typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Four operating modes: hold, shift right, shift left, parallel load
  • Synchronous mode selection via S0, S1
  • Dedicated serial inputs for left and right shift
  • Direct overriding clear
  • Cascadable for wider registers

Applications

  • Serial-to-parallel and parallel-to-serial conversion
  • Arithmetic shift (multiply/divide by 2)
  • General-purpose data routing
  • Pseudo-random number generator
Product Introduction: SN74LS194N Product Introduction

The SN74LS194N from Texas Instruments is a 4-bit bidirectional universal shift register that can perform four operations: hold (no change), shift right, shift left, and parallel load — all selected by the 2-bit mode control (S0, S1). On each rising clock edge, the selected operation is performed synchronously. Shift right: QA→QB→QC→QD, with the new QA loaded from SR SER. Shift left: QD→QC→QB→QA, with the new QD loaded from SL SER. Parallel load: A→QA, B→QB, C→QC, D→QD simultaneously. Hold: S0=S1=0, no change on any output. The asynchronous CLR input resets all outputs to 0 regardless of the clock. The 74194 is called ‘universal’ because it handles all common shift register operations in one IC. Two 74194s cascade to form an 8-bit register: QD of the first connects to SL SER of the second (for left shift), and QA of the second connects to SR SER of the first (for right shift). The N suffix denotes the PDIP-16 package.

Working Principle: SN74LS194N Working Principle

The SN74LS194N has four D-type flip-flops (QA-QD) whose D inputs are connected to a 4:1 multiplexer controlled by S0 and S1. The multiplexer selects the source for each flip-flop: (1) S0=0, S1=0: each D input connects to its own Q output → HOLD (no change). (2) S0=1, S1=0: each D input connects to the previous stage → SHIFT RIGHT: QA←SR_SER, QB←QA, QC←QB, QD←QC. (3) S0=0, S1=1: each D input connects to the next stage → SHIFT LEFT: QD←SL_SER, QC←QD, QB←QC, QA←QB. (4) S0=1, S1=1: each D input connects to its parallel input → PARALLEL LOAD: QA←A, QB←B, QC←C, QD←D. All changes occur on the rising edge of CLK. The CLR input is asynchronous and overrides everything: when CLR=LOW, all Q outputs go LOW immediately. For serial-to-parallel conversion: feed serial data into SR SER, clock 4 times with S0=1,S1=0, then read QA-QD as parallel data. For parallel-to-serial: first parallel load (S0=S1=1), then shift right 4 times, reading QD each time.

Pin Description: SN74LS194N Pin Definition and Functions
Pin Name Type Description
1 CLR Input Asynchronous clear (active LOW)
2 SR SER Input Serial shift-right input
3 A Input Parallel input A (QA)
4 B Input Parallel input B (QB)
5 C Input Parallel input C (QC)
6 D Input Parallel input D (QD)
7 S1 Input Mode select 1 (with S0: 00=hold, 01=left, 10=right, 11=load)
8 GND Power Ground
9 S0 Input Mode select 0
10 SL SER Input Serial shift-left input
11 CLK Input Clock input (rising edge)
12 QD Output Register output D (MSB)
13 QC Output Register output C
14 QB Output Register output B
15 QA Output Register output A (LSB)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS194N used
  • Serial-to-Parallel: Serial data → SR SER; S0=1,S1=0; clock 4 times; read QA-QD as parallel output
  • Parallel-to-Serial: Data on A-D; S0=S1=1, clock once to load; then S0=1,S1=0, clock 4 times; read QD each clock for serial out
  • Multiply by 2: Parallel load number into QA-QD; then shift left once (S0=0,S1=1, clock); result = 2× original; shift left again = 4×
  • 8-Bit Register: Two 74194; QD(#1)→SL SER(#2); QA(#2)→SR SER(#1); shared CLK, S0, S1, CLR; 8-bit bidirectional shift
Alternative Models: What chips are recommended as replacements for SN74LS194N
Model Manufacturer Key Difference Package Supply
74LS194N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS194D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC194D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC194N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT194D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT194N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74194 is a 4-Bit Bidirectional Universal Shift Register. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1