Opens in a new tab

SN74LS126N

Quad 3-state bus buffer, active-HIGH enable, LS TTL, PDIP-14

5000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS126N

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS126N from Texas Instruments contains four independent bus buffer gates with 3-state outputs and active-HIGH output enable, designed for bus-oriented systems in a 14-pin PDIP package.

Key Specifications

Number of Gates 4 (quad bus buffer, 3-state)
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Output Enable Active-HIGH (HIGH=enabled, LOW=high-Z)
Propagation Delay 9ns typical
Output Drive (IOL/IOH) 24mA / -2.6mA (bus driver)
3-State Output Current 20µA max (high-Z leakage)
Operating Temperature 0°C to +70°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Four non-inverting bus buffers with 3-state outputs
  • Active-HIGH output enable
  • 24mA output sink current — bus driver capability
  • High-Z state when disabled (only 20µA leakage)
  • Complement to 74125 (active-LOW enable)

Applications

  • Microprocessor bus interface
  • Multi-device shared bus
  • I/O port expansion
  • Data routing and isolation
Product Introduction: SN74LS126N Product Introduction

The SN74LS126N from Texas Instruments contains four independent non-inverting buffer gates with 3-state (high-impedance) outputs controlled by active-HIGH enable pins. When the output enable (OE) is HIGH, the buffer passes data from input to output with no inversion: Y = A. When OE is LOW, the output enters a high-impedance (high-Z) state, effectively disconnecting from the bus — only 20µA of leakage current flows. This 3-state capability is essential for bus-oriented systems where multiple devices share a common data bus: only one device drives the bus at a time (OE=HIGH), while all others are in high-Z (OE=LOW). The 24mA sink capability makes the 74126 suitable for driving heavily loaded bus lines. The active-HIGH enable is the complement of the 74125 (active-LOW enable). The N suffix denotes the PDIP-14 through-hole package.

Working Principle: SN74LS126N Working Principle

Each buffer in the SN74LS126N has two inputs: a data input (A) and an output enable (OE). When OE=HIGH, the output Y follows input A (non-inverting): Y = A. When OE=LOW, the output transistors are both turned off, placing the output in a high-impedance state where it neither sources nor sinks significant current (<20µA). In a bus system, the 74126 serves as a 'gate' that connects or disconnects a device from the shared bus. A decoder (like 74LS138) generates the enable signals, ensuring only one 74126 is active at any time. If two buffers drive the bus simultaneously with conflicting data, a bus contention occurs — large current flows between the conflicting outputs, potentially damaging the devices. The 74126's 24mA sink capability means it can drive long PCB traces or backplane bus lines with significant capacitive loading. The 9ns propagation delay is fast enough for microprocessor bus cycles.

Pin Description: SN74LS126N Pin Definition and Functions
Pin Name Type Description
1 1OE Input Gate 1 output enable (active HIGH)
2 1A Input Gate 1 data input
3 1Y Output Gate 1 output (3-state)
4 2OE Input Gate 2 output enable
5 2A Input Gate 2 data input
6 2Y Output Gate 2 output (3-state)
7 GND Power Ground
8 3Y Output Gate 3 output (3-state)
9 3A Input Gate 3 data input
10 3OE Input Gate 3 output enable
11 4Y Output Gate 4 output (3-state)
12 4A Input Gate 4 data input
13 4OE Input Gate 4 output enable
14 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS126N used
  • 4-Bit Bus Interface: 4 data bits from peripheral → 74126 inputs; decoder generates OE for one device at a time; shared bus → CPU
  • Output Port: CPU data bus → 74126 inputs; OE tied to I/O write signal; 74126 outputs drive external devices when CPU writes
  • Bus Isolation: When system not accessing a module, OE=LOW → module’s 74126 outputs float; no bus loading
  • With 74LS125: Mix 74126 (active-HIGH OE) and 74125 (active-LOW OE) for different enable polarities in same bus system
Alternative Models: What chips are recommended as replacements for SN74LS126N
Model Manufacturer Key Difference Package Supply
74LS126N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-14 5V TTL
74LS126D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-14 5V TTL
74HC126D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-14 2-6V CMOS
74HC126N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-14 2-6V CMOS
74HCT126D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-14 4.5-5.5V TTL-in
74HCT126N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-14 4.5-5.5V TTL-in
74LVC126D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-14 1.65-3.6V CMOS
74LVC126N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-14 1.65-3.6V CMOS

The 74126 is a Quad Bus Buffer with 3-State Output (Active-High Enable). Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1