Opens in a new tab

SN74LS139N

Dual 2-to-4 decoder/demux, active-LOW, LS TTL, PDIP-16

5000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS139N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS139N from Texas Instruments contains two independent 2-line to 4-line decoder/demultiplexers with active-LOW outputs and enable, ideal for address decoding and data demultiplexing in a 16-pin PDIP package.

Key Specifications

Function Dual 2-line to 4-line decoder/demultiplexer
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Select Inputs A, B per decoder
Enable G (active-LOW, per decoder)
Outputs Y0-Y3 (active-LOW, per decoder)
Propagation Delay 13–25ns typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Two independent 2-to-4 decoders in one package
  • Active-LOW enables and outputs
  • Can be used as demultiplexer (G = data input)
  • Cascadable for wider decoding

Applications

  • Memory address decoding
  • I/O port decoding
  • Data demultiplexing
  • Chip select generation
Product Introduction: SN74LS139N Product Introduction

The SN74LS139N from Texas Instruments contains two independent 2-line to 4-line decoders/demultiplexers. Each decoder has two select inputs (A, B) that determine which of the four active-LOW outputs (Y0-Y3) is driven LOW. The active-LOW enable (G) must be LOW for any output to be active; when G is HIGH, all outputs are HIGH regardless of select inputs. The 74139 is the workhorse of address decoding: with two address lines, it can generate four mutually exclusive active-LOW chip-select signals. Two 74139 decoders can be cascaded to create a 3-to-8 decoder (equivalent to 74138) using the enable of one decoder as the third select line. As a demultiplexer, the G input becomes the data input: the data on G is routed to the selected output (inverted), while unselected outputs remain HIGH. The N suffix denotes the PDIP-16 through-hole package.

Working Principle: SN74LS139N Working Principle

Each decoder in the SN74LS139N implements the logic: when G=LOW, exactly one of Y0-Y3 is LOW based on the select inputs. When BA=00, Y0=LOW (all others HIGH); BA=01, Y1=LOW; BA=10, Y2=LOW; BA=11, Y3=LOW. When G=HIGH, all outputs are HIGH regardless of BA. The function: Yi = (G + (B’·A’ for i=0) + (B’·A for i=1) + (B·A’ for i=2) + (B·A for i=3))’. For a 3-to-8 decoder: connect A2 to 1G (decoder 1 enable) and through an inverter to 2G (decoder 2 enable); A0 and A1 connect to both decoders’ A and B inputs. When A2=LOW, decoder 1 is active (outputs 0-3); when A2=HIGH, decoder 2 is active (outputs 4-7). As a demultiplexer: serial data on G; A,B select the output; the selected output follows G (inverted), while unselected outputs stay HIGH. When G goes LOW, the selected output goes LOW; when G goes HIGH, all outputs go HIGH.

Pin Description: SN74LS139N Pin Definition and Functions
Pin Name Type Description
1 1G Input Decoder 1 enable (active LOW)
2 1A Input Decoder 1 select A (LSB)
3 1B Input Decoder 1 select B (MSB)
4 1Y0 Output Decoder 1 output 0 (active LOW)
5 1Y1 Output Decoder 1 output 1 (active LOW)
6 1Y2 Output Decoder 1 output 2 (active LOW)
7 1Y3 Output Decoder 1 output 3 (active LOW)
8 GND Power Ground
9 2Y3 Output Decoder 2 output 3 (active LOW)
10 2Y2 Output Decoder 2 output 2 (active LOW)
11 2Y1 Output Decoder 2 output 1 (active LOW)
12 2Y0 Output Decoder 2 output 0 (active LOW)
13 2B Input Decoder 2 select B (MSB)
14 2A Input Decoder 2 select A (LSB)
15 2G Input Decoder 2 enable (active LOW)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS139N used
  • Chip Select Generation: 2 address lines → A,B; G tied LOW; Y0-Y3 → chip selects for 4 peripheral ICs; one address decodes to one active-LOW CS
  • 3-to-8 Decoder: A2 → 1G (direct) and 2G (via inverter); A0,A1 → both decoders; 8 active-LOW outputs for memory chip selects
  • Demultiplexer: Serial data on G; A,B select output; data appears (inverted) on selected output; 1-to-4 data routing
  • I/O Port Decode: High address bits → 74139; Y0=IO port 0, Y1=IO port 1, etc.; combined with RD/WR for read/write strobes
Alternative Models: What chips are recommended as replacements for SN74LS139N
Model Manufacturer Key Difference Package Supply
74LS139N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS139D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC139D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC139N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT139D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT139N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in
74LVC139D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-16 1.65-3.6V CMOS
74LVC139N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-16 1.65-3.6V CMOS

The 74139 is a Dual 2-Line to 4-Line Decoder/Demultiplexer. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1