Opens in a new tab

SN74LS148N

8-to-3 priority encoder, active-LOW, cascade pins, LS TTL, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS148N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS148N from Texas Instruments is an 8-line to 3-line priority encoder that accepts 8 active-LOW inputs and produces a 3-bit binary output representing the highest-priority active input in a 16-pin PDIP package.

Key Specifications

Function 8-line to 3-line priority encoder
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Inputs 0-7 (active LOW, priority 7=highest)
Outputs A2, A1, A0 (active LOW, binary of highest input)
Enable Input EI (active LOW, enables encoder)
Group Outputs GS (group signal, active LOW), EO (enable out, active LOW)
Propagation Delay 10-15ns typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Priority encoding: highest-numbered active input wins
  • Cascading via EI, EO, and GS
  • Active-LOW inputs and outputs
  • GS output indicates any input is active
  • EO output indicates no input is active (for cascading)

Applications

  • Keyboard encoding
  • Interrupt priority encoding
  • Microprocessor interrupt controllers
  • Data input selection
Product Introduction: SN74LS148N Product Introduction

The SN74LS148N from Texas Instruments is an 8-line to 3-line priority encoder with active-LOW inputs and outputs. It accepts 8 input lines (0-7) and outputs a 3-bit binary code representing the highest-priority (highest-numbered) active input. Input 7 has the highest priority; input 0 has the lowest. If multiple inputs are active simultaneously, only the highest-priority input is encoded. The EI (enable input, active-LOW) must be LOW for the encoder to operate. The GS (group signal) output goes LOW when any input is active, providing a valid-data indicator. The EO (enable output) goes LOW only when no input is active (all inputs HIGH), enabling a lower-priority encoder in a cascaded system. Two 74148 encoders can be cascaded to form a 16-to-4 priority encoder: the higher-priority encoder’s EO connects to the lower-priority encoder’s EI; the A2-A0 outputs are ORed; and the GS outputs indicate which encoder is active. The N suffix denotes the PDIP-16 through-hole package.

Working Principle: SN74LS148N Working Principle

The SN74LS148N operates as a priority encoder. When EI=LOW (enabled): The encoder examines inputs 7 through 0 and finds the highest-numbered active (LOW) input. It outputs the 3-bit complement of that input number on A2, A1, A0. For example, if input 5 is the highest active input, A2,A1,A0 = 010 (complement of 5=101). GS goes LOW (indicating at least one input is active). EO stays HIGH (since there IS an active input). If no input is active (all HIGH): A2,A1,A0 = 111 (complement of 0, but meaningless); GS stays HIGH (no active input); EO goes LOW (indicating no active input, enabling next lower encoder). When EI=HIGH (disabled): All outputs go HIGH regardless of inputs. For 16-to-4 encoding: Higher-priority encoder (inputs 8-15): EI grounded. Its EO → EI of lower-priority encoder (inputs 0-7). Output bits: A2,A1,A0 of both encoders are NAND-gated; the higher-priority encoder’s GS provides the MSB (A3) of the 4-bit output.

Pin Description: SN74LS148N Pin Definition and Functions
Pin Name Type Description
1 A2 Output Encoded output MSB (active LOW)
2 EO Output Enable output (active LOW; LOW = no input active)
3 GS Output Group signal (active LOW; LOW = at least one input active)
4 A1 Output Encoded output bit 1 (active LOW)
5 A0 Output Encoded output LSB (active LOW)
6 7 Input Input 7 (highest priority, active LOW)
7 6 Input Input 6
8 GND Power Ground
9 5 Input Input 5
10 4 Input Input 4
11 3 Input Input 3
12 2 Input Input 2
13 1 Input Input 1
14 0 Input Input 0 (lowest priority, active LOW)
15 EI Input Enable input (active LOW; LOW = enabled)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS148N used
  • Interrupt Priority Encoder: 8 interrupt sources → inputs 0-7; A2-A0 → MCU interrupt vector; GS → MCU interrupt pin; highest-priority interrupt serviced first
  • 16-Input Priority Encoder: Two 74148s; inputs 8-15 on higher-priority, 0-7 on lower; cascaded via EO→EI; outputs combined with NAND gates for 4-bit result
  • Keyboard Encoder: 8 keys → inputs 0-7; A2-A0 = key code; GS = key-pressed flag; no multiple-key ambiguity
  • Active-Low Detection: 8 fault lines → inputs; GS = any fault active; A2-A0 = highest-priority fault code
Alternative Models: What chips are recommended as replacements for SN74LS148N
Model Manufacturer Key Difference Package Supply
74LS148N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS148D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC148D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC148N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT148D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT148N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74148 is a 8-Line to 3-Line Priority Encoder. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1