Opens in a new tab

CD4027BE

Dual J-K flip-flop, positive-edge, set/reset active-HIGH, CMOS 3-18V, PDIP-16

4000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4027BE

Package:

PDIP-16 (19.3 x 9.4 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4027BE from Texas Instruments contains two independent J-K flip-flops with set and reset, positive-edge triggered — the CMOS counterpart of the 7476 for 3V-18V systems in a 16-pin PDIP package.

Key Specifications

Number of Flip-Flops 2 (dual, independent)
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Trigger Type Positive-edge (rising edge of CLK)
Set (S) Active-HIGH (asynchronous, sets Q=1)
Reset (R) Active-HIGH (asynchronous, sets Q=0)
Max Clock Frequency 10MHz typical @ VDD=10V
Propagation Delay 150ns typical @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 9.4mm)

Features

  • Dual J-K positive-edge-triggered flip-flops
  • Active-HIGH set and reset (unlike TTL’s active-LOW)
  • Toggle mode: J=K=VDD
  • 3V-18V wide supply range
  • Complementary outputs (Q and NOT-Q)

Applications

  • Toggle flip-flop / frequency divider
  • Counter building blocks
  • Control sequencing
  • Data storage
Product Introduction: CD4027BE Product Introduction

The CD4027BE from Texas Instruments contains two independent J-K positive-edge-triggered flip-flops with active-HIGH asynchronous set (S) and reset (R). It is the CMOS counterpart of the TTL 7476, but with two key differences: (1) it triggers on the positive (rising) clock edge (like the 7474 D flip-flop), and (2) the set and reset inputs are active-HIGH (unlike the 7476’s active-LOW PRE and CLR). The J-K functionality provides four operating modes: hold (J=0,K=0), set (J=1,K=0), reset (J=0,K=1), and toggle (J=1,K=1). The toggle mode is the most common use: connecting J and K to VDD causes Q to toggle on each rising clock edge, dividing the clock by 2. The wide 3V-18V supply range makes the CD4027 suitable for battery-powered and multi-voltage systems where TTL can’t operate. The active-HIGH set and reset are consistent with CMOS logic conventions. Two CD4027 flip-flops can be cascaded in toggle mode to divide by 4, or used independently for dual control functions. The BE suffix denotes the PDIP-16 package.

Working Principle: CD4027BE Working Principle

Each J-K flip-flop in the CD4027BE operates on the rising edge of CLK. The J and K inputs determine what happens on the next rising clock edge: J=0,K=0 → Q holds; J=1,K=0 → Q=1 (set); J=0,K=1 → Q=0 (reset); J=1,K=1 → Q toggles. The asynchronous set (S=HIGH) forces Q=1 regardless of CLK, J, K; the asynchronous reset (R=HIGH) forces Q=0. Both S and R are active-HIGH. For normal operation, S and R must both be LOW. If both S and R are HIGH simultaneously, both Q and NOT-Q go HIGH (invalid state). For toggle mode: J=K=VDD (both HIGH); each rising clock edge toggles Q; Q frequency = CLK/2. For frequency division by 4: cascade — Q1 → CLK2; Q2 = CLK/4. For a D flip-flop equivalent: connect J=data and K=NOT-data (through an inverter). The CD4027’s positive-edge triggering is compatible with CD4013 (D flip-flop) and CD4017 (counter), making it easy to build synchronous systems with a common clock.

Pin Description: CD4027BE Pin Definition and Functions
Pin Name Type Description
1 1Q Output Flip-flop 1 Q output
2 1NOT-Q Output Flip-flop 1 complementary output
3 1CLK Input Flip-flop 1 clock (positive edge)
4 1R Input Flip-flop 1 reset (active HIGH)
5 1K Input Flip-flop 1 K input
6 1J Input Flip-flop 1 J input
7 1S Input Flip-flop 1 set (active HIGH)
8 VSS Power Ground
9 2S Input Flip-flop 2 set (active HIGH)
10 2J Input Flip-flop 2 J input
11 2K Input Flip-flop 2 K input
12 2R Input Flip-flop 2 reset (active HIGH)
13 2CLK Input Flip-flop 2 clock (positive edge)
14 2NOT-Q Output Flip-flop 2 complementary output
15 2Q Output Flip-flop 2 Q output
16 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4027BE used
  • Toggle / ÷2: J=K=VDD; clock on CLK; Q toggles each rising edge; Q = CLK/2
  • 2-Bit Counter: FF1: J=K=VDD, CLK=input; Q1→CLK2; FF2: J=K=VDD; Q2,Q1 count 00→01→10→11→00
  • Controlled Toggle: J=K=enable; enable=HIGH → toggle on clock; enable=LOW → hold; gated oscillator
  • D Flip-Flop: J=data, K=NOT-data (via inverter); Q follows data on rising CLK edge
Alternative Models: What chips are recommended as replacements for CD4027BE
Model Manufacturer Key Difference Package Supply
CD4027BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4027BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4027BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144027BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC109D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC109N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT109D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4027 is the CMOS 4000-series dual j-k flip-flop operating over the wide 3-18V supply range. The HEF4027 (NXP) and MC144027 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC109 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1