Opens in a new tab

CD4094BE

8-bit SIPO shift register with output latch, 3-state, CMOS 3-18V, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4094BE

Package:

PDIP-16 (19.3 x 9.4 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4094BE from Texas Instruments is an 8-bit serial-in parallel-out shift register with 3-state output latch and cascade outputs — the CMOS equivalent of the 74HC595 for 3V-18V systems in a 16-pin PDIP package.

Key Specifications

Function 8-bit serial-in parallel-out shift register with output latch
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Serial Input DATA (single input)
Outputs Q1-Q8 (latched parallel outputs, 3-state)
Cascade Outputs QS (sync), QS’ (async) for cascading
Output Enable OE (active HIGH enables outputs)
Strobe STROBE (active HIGH, transfers shift register to output latch)
Max Clock Frequency 6MHz @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 9.4mm)

Features

  • 8-bit shift register with separate output latch
  • 3-state outputs (can be bus-connected)
  • Two cascade outputs: QS (synchronous) and QS’ (asynchronous)
  • Output enable for bus applications
  • Flicker-free display driving (latch holds output during shift)
  • 3V-18V wide supply range

Applications

  • Flicker-free LED display driving
  • GPIO expansion (2 MCU pins → 8 outputs)
  • Bus-oriented output ports
  • Multi-digit display multiplexing
Product Introduction: CD4094BE Product Introduction

The CD4094BE from Texas Instruments is an 8-bit serial-in parallel-out shift register with a separate output latch and 3-state outputs — essentially the CMOS version of the 74HC595. The key advantage over the simpler CD4014/74164 is the output latch: the shift register and output latch are separate, so data can be shifted in without disturbing the current output display. Only when STROBE goes HIGH is the shift register data transferred to the output latch, updating the outputs simultaneously. This eliminates the flicker that occurs with the 74164 where outputs change as data shifts through. The 3-state outputs (controlled by OE) allow multiple CD4094s to share a common output bus. The two cascade outputs (QS synchronous with clock, QS’ asynchronous) allow daisy-chaining: QS or QS’ connects to the DATA input of the next CD4094, creating 16, 24, or more outputs from just 3 MCU pins (DATA, CLK, STROBE). The wide 3V-18V supply range makes the CD4094 suitable for battery and multi-voltage systems. The BE suffix denotes the PDIP-16 package.

Working Principle: CD4094BE Working Principle

The CD4094BE has two separate registers: an 8-bit shift register and an 8-bit output latch. On each rising CLK edge, the DATA input is shifted into the first stage of the shift register, and all other stages shift one position toward Q8. The QS output provides the data being shifted out (after Q8) for cascading — QS changes on the rising clock edge (synchronous), while QS’ changes on the falling clock edge (asynchronous, one-half clock cycle early). The output latch holds the current display data independently of the shift register. When STROBE goes HIGH, the shift register contents are copied to the output latch, updating Q1-Q8 simultaneously. When STROBE is LOW, the output latch holds its previous value regardless of shift register changes. The OE (output enable) controls the 3-state outputs: when OE=HIGH, Q1-Q8 drive the bus; when OE=LOW, Q1-Q8 go to high-impedance (tri-state). To write 8 bits: (1) Shift in 8 bits of data on DATA while clocking 8 times (STROBE=LOW, OE=HIGH); (2) Pulse STROBE HIGH to transfer data to output latch; (3) Outputs update instantly and simultaneously. To cascade: QS or QS’ → DATA of next CD4094; shared CLK and STROBE; one 8-bit transfer updates all chips.

Pin Description: CD4094BE Pin Definition and Functions
Pin Name Type Description
1 QS’ Output Cascade output (asynchronous, rising on falling CLK)
2 QS Output Cascade output (synchronous, changes on rising CLK)
3 Q8 Output Parallel output bit 8 (MSB, 3-state)
4 Q7 Output Parallel output bit 7 (3-state)
5 Q6 Output Parallel output bit 6 (3-state)
6 Q5 Output Parallel output bit 5 (3-state)
7 Q4 Output Parallel output bit 4 (3-state)
8 VSS Power Ground
9 Q3 Output Parallel output bit 3 (3-state)
10 Q2 Output Parallel output bit 2 (3-state)
11 Q1 Output Parallel output bit 1 (LSB, 3-state)
12 OE Input Output enable (HIGH = outputs active, LOW = high-Z)
13 STROBE Input Latch strobe (HIGH = transfer shift register to output latch)
14 DATA Input Serial data input
15 CLK Input Clock (positive edge)
16 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4094BE used
  • 8-LED Display (Flicker-Free): MCU: DATA, CLK, STROBE; shift 8 bits (STROBE=LOW); pulse STROBE HIGH; all 8 LEDs update simultaneously; no flicker
  • 24-Output Expansion: Three CD4094s; QS → DATA of next; shared CLK, STROBE, OE; shift 24 bits; pulse STROBE; 24 outputs from 3 MCU pins
  • Bus Output Port: OE controlled by address decoder; CD4094 outputs on shared bus; only one CD4094 drives bus at a time (3-state)
  • Multi-Digit 7-Segment: 3 CD4094s for 3 digits; shift segment data; STROBE updates all digits simultaneously; no ghosting
Alternative Models: What chips are recommended as replacements for CD4094BE
Model Manufacturer Key Difference Package Supply
CD4094BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4094BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4094BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144094BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC595D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC595N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT595D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4094 is the CMOS 4000-series 8-stage serial shift register with output latches operating over the wide 3-18V supply range. The HEF4094 (NXP) and MC144094 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC595 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1