Opens in a new tab

SN74LS109N

Dual J-K flip-flop, positive-edge, preset/clear, LS TTL, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS109N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74LS109N from Texas Instruments contains two independent J-K positive-edge-triggered flip-flops with complementary outputs, preset and clear — the positive-edge version of the 7476 in a 16-pin PDIP package.

Key Specifications

Number of Flip-Flops 2 (dual, independent)
Logic Family LS (Low-power Schottky)
Trigger Type Positive-edge (rising edge of CLK)
Supply Voltage 4.75V to 5.25V
Max Clock Frequency 25MHz typical
Preset (PRE) Active-LOW (asynchronous, sets Q=1)
Clear (CLR) Active-LOW (asynchronous, sets Q=0)
Propagation Delay 16ns typical (CLK to Q)
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Dual J-K positive-edge-triggered flip-flops
  • Active-LOW preset and clear (asynchronous)
  • Complementary outputs (Q and NOT-Q)
  • Toggle mode: J=1,K=1
  • Same pinout as SN74LS73N but with preset

Applications

  • Synchronous counters
  • Toggle flip-flops / frequency dividers
  • Control logic
  • Data registers
Product Introduction: SN74LS109N Product Introduction

The SN74LS109N from Texas Instruments contains two independent J-K positive-edge-triggered flip-flops with direct preset (PRE, active-LOW) and clear (CLR, active-LOW). It combines the J-K functionality of the 7476 with the positive-edge triggering of the 7474 D flip-flop. On each rising clock edge, the Q output is updated based on the J and K inputs: J=0,K=0 → hold; J=1,K=0 → set (Q=1); J=0,K=1 → reset (Q=0); J=1,K=1 → toggle. The positive-edge triggering makes the 74109 compatible with synchronous counter designs where all flip-flops share a common clock and update simultaneously — unlike the 7476’s negative-edge triggering which can cause ripple delays in synchronous systems. The active-LOW preset and clear override the clocked operation. The 74109 is the preferred J-K flip-flop for synchronous counter design because the positive-edge triggering aligns with the standard clock convention. The N suffix denotes the PDIP-16 through-hole package.

Working Principle: SN74LS109N Working Principle

Each J-K flip-flop in the SN74LS109N captures the J and K input states on the rising edge of CLK and updates Q accordingly. Truth table (on rising CLK edge): J=0,K=0 → Q holds; J=1,K=0 → Q=1 (set); J=0,K=1 → Q=0 (reset); J=1,K=1 → Q toggles. The asynchronous inputs override: PRE=LOW forces Q=1; CLR=LOW forces Q=0. For normal operation, PRE and CLR must both be HIGH. The positive-edge triggering means all flip-flops in a synchronous system update at the same time when they share a common clock — critical for synchronous counter design where ripple delays would cause incorrect operation. For a synchronous 2-bit counter: both 74109 flip-flops share the same CLK; FF1 J=K=1 (always toggle); FF2 J=K=Q1 (toggle only when Q1=1); both update simultaneously on each clock edge, counting 00→01→10→11→00. This avoids the ripple delay of cascaded negative-edge counters (like 7476).

Pin Description: SN74LS109N Pin Definition and Functions
Pin Name Type Description
1 1CLR Input Flip-flop 1 clear (active LOW)
2 1J Input Flip-flop 1 J input
3 1K Input Flip-flop 1 K input (K̄ in some sources)
4 1CLK Input Flip-flop 1 clock (positive edge)
5 1PRE Input Flip-flop 1 preset (active LOW)
6 1Q Output Flip-flop 1 Q output
7 1NOT-Q Output Flip-flop 1 complementary output
8 GND Power Ground
9 2NOT-Q Output Flip-flop 2 complementary output
10 2Q Output Flip-flop 2 Q output
11 2PRE Input Flip-flop 2 preset (active LOW)
12 2CLK Input Flip-flop 2 clock (positive edge)
13 2K Input Flip-flop 2 K input
14 2J Input Flip-flop 2 J input
15 2CLR Input Flip-flop 2 clear (active LOW)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS109N used
  • Synchronous 2-Bit Counter: Shared CLK; FF1: J=K=1; FF2: J=K=Q1; both update simultaneously; counts 00→01→10→11→00
  • Toggle / ÷2: J=K=1 (tied HIGH); clock on CLK; Q toggles each rising edge
  • Controlled Toggle: J=enable, K=enable; enable=HIGH → toggle; enable=LOW → hold
  • D Flip-Flop Substitute: J=data, K=NOT-data (via inverter); Q = data on rising CLK edge
Alternative Models: What chips are recommended as replacements for SN74LS109N
Model Manufacturer Key Difference Package Supply
74LS109N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS109D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC109D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC109N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT109D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT109N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74109 is a Dual J-K Positive-Edge-Triggered Flip-Flop. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1