Opens in a new tab

Home » Integrated Circuits ICs » SN74HC595N

SN74HC595N

8-bit shift register with output latch, DIP-16

12989

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC595N

Package:

DIP-16 (19.30 x 6.35 mm, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

SN74HC595N Overview

The SN74HC595N is an 8-bit shift register with output latches and 3-state outputs from Texas Instruments, supply voltage 2V-6V, maximum clock frequency 52MHz at 5V, in a DIP-16 through-hole package, widely used for LED matrix driving and I/O expansion.

Key Features

  • 8-bit shift register + output latch
  • Supply voltage: 2V-6V
  • Maximum clock frequency: 52MHz at 5V
  • Output current: +/-6mA
  • 3-state outputs
  • Serial cascade output (QH prime)
Product Introduction: SN74HC595N Product Introduction

The SN74HC595N is an 8-bit serial-in, parallel-out shift register with 3-state output registers from Texas Instruments, packaged in a 16-pin PDIP through-hole format. It features a wide 2 V to 6 V operating voltage range, 13 ns typical propagation delay, and plus or minus 6 mA output drive at 5 V. The device contains an 8-bit shift register that feeds an 8-bit D-type storage register with parallel 3-state outputs, allowing the shift register and output register to operate independently. With separate clocks, direct clear, serial output for cascading, and output enable control, it is a versatile logic building block for I/O expansion and LED driving.

Working Principle: SN74HC595N Working Principle

The SN74HC595N consists of two independently clocked 8-bit registers. Data is shifted into the 8-bit shift register on the rising edge of the shift register clock (SRCLK). Each rising edge moves the existing data one position and loads the SER input into the first stage. The shift register output (QH prime) provides the cascaded serial output for daisy-chaining multiple devices. On the rising edge of the register clock (RCLK), the contents of the shift register are transferred to the 8-bit storage register. The storage register outputs (QA through QH) are enabled when the output enable (OE) input is low; when OE is high, the outputs are in a high-impedance state. The shift register clear (SRCLR) input, when low, resets all shift register stages to low independently of the clocks. This dual-register architecture allows new data to be shifted in while the current output pattern remains stable, eliminating output flicker during updates. Multiple devices can be cascaded by connecting QH prime of one device to SER of the next, sharing SRCLK and RCLK across all devices.

Pin Description: SN74HC595N Pin Definition and Functions
Pin Name Description
1 Q1 Storage register output bit 1
2 Q2 Storage register output bit 2
3 Q3 Storage register output bit 3
4 Q4 Storage register output bit 4
5 Q5 Storage register output bit 5
6 Q6 Storage register output bit 6
7 Q7 Storage register output bit 7
8 GND Ground
9 Q7′ Serial output from shift register; cascade to next device SER input
10 SRCLR Shift register clear; active low, resets all shift register bits
11 SRCLK Shift register clock; rising edge shifts data one position
12 RCLK Register clock; rising edge transfers shift register to storage register
13 OE Output enable; active low, high forces outputs to high-impedance
14 SER Serial data input; loaded into first shift register stage on SRCLK rising edge
15 Q0 Storage register output bit 0
16 VCC Power supply (2 V to 6 V)
Application Scenarios: In which products and applications is SN74HC595N used
  • LED Matrix Driving: Cascaded shift registers for multiplexed LED displays and 7-segment indicators
  • GPIO Expansion: Adding 8 or more digital outputs to a microcontroller using only 3 SPI pins
  • Relay Control: Driving multiple relay coils through shift register outputs with latch capability
  • Industrial Control Panels: Indicator lamp and switch status display in factory equipment
  • Hobbyist Projects: Arduino/Raspberry Pi I/O expansion for robotics and automation
Alternative Models: What chips are recommended as replacements for SN74HC595N
Model Manufacturer Bits Package Mount Notes
SN74HC595DR Texas Instruments 8 SOIC-16 SMD Surface-mount variant
74HC595D Nexperia 8 SOIC-16 SMD Pin-compatible alternative
MC74HC595ADG onsemi 8 SOIC-16 SMD onsemi equivalent
SN74HC595DBR Texas Instruments 8 SSOP-16 SMD Smaller footprint package
TPIC6B595N Texas Instruments 8 DIP-20 TH Power shift register, 500 mA outputs

SN74HC595N is an 8-bit shift register with 3-state output from TI in PDIP-16. The SN74HC595DR is the SOIC-16 surface-mount version with identical functionality. 74HC595D from Nexperia provides the same function in SOIC-16. For higher voltage, CD4094BE offers 3-18V CMOS operation in DIP-16. For cascaded designs, the QH prime output enables daisy-chaining. TLC6C598 is a constant-current LED driver version for display applications.

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1