Opens in a new tab

DRV5032AJDBZT

Ultra-low-power omnipolar Hall switch, 1.3uA, +/-9.5mT, open-drain, SOT-23-3

11107

Effective Inventory

Image for reference only

Manufacturer Part:

DRV5032AJDBZT

Package:

SOT-23-3 (2.90 x 1.30 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV5032AJDBZT from Texas Instruments is an ultra-low-power omnipolar digital Hall effect switch in a SOT-23-3 package. With 1.3 µA supply current at 20 Hz sampling, ±9.5 mT operate threshold, and open-drain output, it is designed for battery-critical position sensing in portable and IoT applications.

Key Specifications

Magnetic Response Omnipolar (N or S pole activates)
Operate Threshold (BOP) ±9.5 mT (max)
Release Threshold (BRP) ±3.0 mT
Supply Voltage 1.65 V to 5.5 V
Supply Current 1.3 µA (typ, 20 Hz sampling)
Output Type Open-drain
Sampling Rate 20 Hz (AJ version)
Operating Temperature -40°C to +85°C
Package SOT-23-3

Features

  • Ultra-low 1.3 µA supply current for maximum battery life
  • Omnipolar operation responds to both north and south magnetic poles
  • Open-drain output for flexible logic interfacing
  • Wide 1.65 V to 5.5 V supply range
  • Internal oscillator with periodic sampling eliminates continuous bias
  • Small SOT-23 footprint for space-constrained designs

Applications

  • Battery-powered position and proximity sensing
  • Cell phone and laptop lid detection
  • Smart meter tamper detection
  • Medical device and IoT sensor switching
  • Electronic lock and appliance position detection
Product Introduction: DRV5032AJDBZT Product Introduction

The DRV5032AJDBZT from Texas Instruments is an ultra-low-power omnipolar digital Hall effect switch in a compact SOT-23-3 surface-mount package. The AJ variant features a ±9.5 mT maximum operate threshold with 20 Hz sampling rate and draws only 1.3 µA typical supply current from a 1.65 V to 5.5 V supply. The omnipolar response means the output activates when either a north or south magnetic pole exceeds the threshold, simplifying magnet orientation in mechanical designs. The open-drain output provides flexible interfacing with logic levels from 1.65 V to 5.5 V through an external pull-up resistor. The device uses an internal oscillator to periodically sample the magnetic field rather than continuously biasing the Hall element, achieving the ultra-low power consumption that makes it ideal for coin-cell and energy-harvesting applications. The wide supply range and low voltage operation support direct battery connection without regulation.

Working Principle: DRV5032AJDBZT Working Principle

The DRV5032AJDBZT uses a planar Hall effect sensor element that generates a voltage proportional to the perpendicular magnetic field (B-field). The Hall element is periodically biased by an internal oscillator at 20 Hz sampling rate. During each sample, the Hall voltage is amplified and compared against threshold references for both north and south polarity fields. If the absolute value of the detected field exceeds the 9.5 mT operate threshold (BOP), the open-drain output is pulled low. When the field decreases below the 3.0 mT release threshold (BRP), the output returns to high impedance. The hysteresis between BOP and BRP prevents output chattering near the switching threshold. Between sampling intervals, the Hall element and most internal circuitry are powered down, reducing the average supply current to 1.3 µA. The omnipolar detection is achieved by comparing the Hall voltage against both positive and negative reference levels simultaneously.

Pin Description: DRV5032AJDBZT Pin Definition and Functions
Pin Name Function
1 GND Device ground connection
2 VCC Supply voltage input (1.65 V to 5.5 V)
3 OUT Open-drain output; active low when |B| > BOP; requires external pull-up resistor
Application Scenarios: In which products and applications is DRV5032AJDBZT used
  • Portable Device Lid Sensing: Detecting open/closed status of laptop, tablet, or phone clamshell enclosures
  • Smart Meter Tamper Detection: Magnetic tamper event detection in utility meters with ultra-low standby current
  • Medical Device Position: Syringe plunger detection or pill dispenser door monitoring in battery-powered medical devices
  • IoT Sensor Node: Reed switch replacement in wireless sensor networks with multi-year coin-cell battery life
  • Electronic Lock: Deadbolt position feedback in smart lock mechanisms with minimal power draw
Alternative Models: What chips are recommended as replacements for DRV5032AJDBZT
Model Manufacturer BOP Iq Output Package Notes
DRV5032FADBZT Texas Instruments 4.8 mT 1.3 µA Push-pull SOT-23-3 Lower threshold, push-pull
DRV5032FBDBZT Texas Instruments 4.8 mT 0.54 µA Push-pull SOT-23-3 Ultra-low 5 Hz, 0.54 µA
AH3783-SA-7 Diodes Inc 10 mT 2.5 µA Push-pull SOT-23-3 Similar omnipolar
SI7211-B-00-IV Silicon Labs 20 mT 0.5 µA Open-drain SOT-23-3 I2C threshold programmable
HAL248UT-A-A-3-00 Macom 3 mT 4 µA Push-pull SOT-23-3 Lower threshold, higher Iq

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1