Opens in a new tab

DRV5015A3QDBZR

Automotive latch Hall sensor, 3.5mT BOP, push-pull, SOT-23-3, AEC-Q100

12324

Effective Inventory

Image for reference only

Manufacturer Part:

DRV5015A3QDBZR

Package:

SOT-23-3 (2.90 x 1.30 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV5015A3QDBZR from Texas Instruments is an automotive-qualified digital-latch Hall effect sensor in a SOT-23-3 package. With a 3.5 mT operate point and 2.5 mT release point (AD version), it provides a latching output for rotary encoding and brushless DC motor commutation applications.

Key Specifications

Magnetic Response Latching (bipolar switch)
Operate Point (BOP) 3.5 mT (typ)
Release Point (BRP) -2.5 mT (typ)
Output Type Push-pull (CMOS)
Supply Voltage 2.7 V to 5.5 V
Supply Current 3.5 mA (typ)
Bandwidth 30 kHz
Operating Temperature -40°C to +125°C
Package SOT-23-3

Features

  • Automotive AEC-Q100 qualified
  • Latching output requires alternating N/S poles to toggle
  • High-sensitivity 3.5 mT operate point
  • Push-pull CMOS output for direct MCU interface
  • Wide 2.7 V to 5.5 V supply range
  • 30 kHz bandwidth for high-speed rotary encoding

Applications

  • BLDC motor commutation
  • Rotary encoder position sensing
  • Speed and position measurement
  • Automotive seat position detection
  • Industrial proximity sensing
Product Introduction: DRV5015A3QDBZR Product Introduction

The DRV5015A3QDBZR from Texas Instruments is an automotive-qualified latching Hall effect sensor in a compact SOT-23-3 surface-mount package. The AD version features a 3.5 mT typical operate point (BOP) with a -2.5 mT typical release point (BRP), requiring alternating north and south magnetic poles to toggle the output. This latching behavior is essential for rotary encoding and BLDC motor commutation where the sensor must maintain its output state until the opposite polarity field is detected. The push-pull CMOS output directly interfaces with microcontroller GPIO pins without external pull-up resistors. The device is AEC-Q100 Grade 0 qualified for automotive applications, operating from -40°C to +125°C. The 30 kHz bandwidth supports high-speed motor commutation at up to several thousand RPM. The wide 2.7 V to 5.5 V supply range enables direct connection to 3.3 V or 5 V automotive logic rails.

Working Principle: DRV5015A3QDBZR Working Principle

The DRV5015A3QDBZR uses a planar Hall effect element that generates a voltage proportional to the perpendicular component of the magnetic field. The Hall voltage is amplified and compared against two threshold levels: a positive threshold (BOP = 3.5 mT) and a negative threshold (BRP = -2.5 mT). When the south pole of a magnet approaches and the field exceeds BOP, the output switches high. The output remains high even when the field drops below BOP, due to the latching (bistable) architecture. The output only switches low when the north pole approaches and the field exceeds BRP in the negative direction. This alternating BOP/BRP switching creates the latching behavior essential for detecting multi-pole ring magnets in rotary encoders. The internal band-gap reference provides stable thresholds over temperature, and the chopper-stabilized amplifier minimizes offset drift.

Pin Description: DRV5015A3QDBZR Pin Definition and Functions
Pin Name Function
1 VCC Supply voltage input (2.7 V to 5.5 V)
2 GND Ground connection
3 OUT Push-pull CMOS output; high when B > BOP, low when B < BRP
Application Scenarios: In which products and applications is DRV5015A3QDBZR used
  • BLDC Motor Commutation: Detecting rotor magnet pole positions for electronic commutation in brushless DC motor drives
  • Rotary Encoder: Multi-pole ring magnet detection for incremental position encoding in automotive and industrial applications
  • Speed Measurement: Rotational speed sensing using multi-pole magnets in transmission and wheel speed sensors
  • Seat Position Detection: Automotive seat track position sensing using magnet strip with alternating poles
  • Flow Meter: Impeller rotation detection in fluid flow meters with embedded magnets
Alternative Models: What chips are recommended as replacements for DRV5015A3QDBZR
Model Manufacturer BOP/BRP Output Auto Package Notes
DRV5015A1QDBZR TI 8.5/-5.5 mT Push-pull Yes SOT-23-3 Higher threshold
DRV5015A2QDBZR TI 5.5/-3.5 mT Push-pull Yes SOT-23-3 Medium threshold
AH1806-WG-7 Diodes Inc 3.5/-3.5 mT Push-pull No SOT-23-3 Similar, non-auto
HAL559LK-E8861 Infineon 5/-5 mT Open-drain Yes TSSOP-8 Auto, more features
US1881KUA-AAA-000-BU Melexis 5/-5 mT Open-drain No SOT-23-3 Popular latch alternative

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1