Opens in a new tab

TPS2553DBVR

0.075-1.7A adj current limit, 85mΩ, 2.5-6.5V USB power switch, SOT-23-6

5657

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2553DBVR

Package:

SOT-23-6 (DBV) (2.90 × 2.80 × 1.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS2553DBVR from Texas Instruments is a precision adjustable current-limited power distribution switch in a SOT-23-6 package. It provides up to 1.5 A continuous load current with programmable current limit from 75 mA to 1.7 A via an external resistor, featuring 85 mΩ on-resistance, reverse voltage protection, and constant-current limiting during overcurrent conditions.

Key Specifications

  • Operating Voltage: 2.5 V to 6.5 V
  • Maximum Load Current: 1.5 A
  • Current Limit Range: 75 mA to 1700 mA (adjustable)
  • Current Limit Accuracy: ±6% at 1.7 A
  • On-Resistance: 85 mΩ
  • Overcurrent Response: 2 µs (typ)
  • Active-High Enable Input
  • FAULT Open-Drain Output
  • Operating Temperature: -40°C to +125°C
  • Package: SOT-23-6 (DBV), MSL 1

Features

  • Constant-current limiting during overload
  • Reverse input-output voltage protection
  • Built-in soft start
  • 15 kV ESD protection per IEC 61000-4-2
  • UL listed (File No. E169910)
  • Backwards compatible with TPS2550/51

Applications

  • USB port power protection
  • Hot-plug power supply protection
  • Notebook and desktop USB ports
  • Industrial load switches
  • Consumer electronics power distribution
Product Introduction: TPS2553DBVR Product Introduction

The TPS2553DBVR is a precision adjustable current-limited power distribution switch from Texas Instruments designed for applications requiring accurate current limiting or protection against heavy capacitive loads and short circuits. The device provides up to 1.5 A of continuous load current with a programmable current-limit threshold from 75 mA to 1.7 A via a single external resistor. Current-limit accuracy of ±6% is achieved at the higher current settings. The 85 mΩ high-side N-channel MOSFET switch features built-in soft start to minimize inrush current surges. During overcurrent conditions, the device limits output current to a safe level in constant-current mode. A reverse-voltage comparator disables the switch when the output voltage exceeds the input, providing bidirectional protection. The FAULT open-drain output indicates overcurrent and reverse-voltage events.

Working Principle: TPS2553DBVR Working Principle

The TPS2553 uses an internal charge pump to drive the gate of an 85 mΩ N-channel MOSFET above the source voltage, enabling the high-side switch to operate from input voltages as low as 2.5 V. The current-sense amplifier monitors the load current through the MOSFET. When the current exceeds the programmed threshold (set by the ILIM resistor), the device enters constant-current mode by reducing the gate drive to limit the output current. The response time is approximately 2 µs. Reverse voltage protection is implemented by a comparator that monitors VOUT vs VIN; when VOUT exceeds VIN, the MOSFET is turned off to prevent reverse current flow. The FAULT open-drain output is asserted low during both overcurrent and reverse-voltage conditions. Soft start ramps the output voltage gradually during turn-on to minimize inrush current into capacitive loads.

Pin Description: TPS2553DBVR Pin Definition and Functions
Pin Name Description
1 OUT Switch Output (to load)
2 GND Ground
3 ILIM Current Limit Set Resistor (to GND)
4 UVLO/EN Undervoltage Lockout / Enable Input
5 FAULT Fault Indicator Output (Open-Drain, Active Low)
6 IN Switch Input (2.5-6.5 V supply)
Application Scenarios: In which products and applications is TPS2553DBVR used
  • USB Port Protection: Precision 500 mA / 900 mA current limiting for USB 2.0/3.0 host ports with IEC 61000-4-2 ESD protection
  • Hot-Plug Power Supplies: Inrush current limiting for PCIe, SATA, and other hot-swap interfaces
  • Industrial Load Switches: Adjustable current limit from 75 mA to 1.7 A for various peripheral power rails
  • Battery-Powered Devices: Reverse current blocking protects battery when output is driven above input
  • Multi-Port Hubs: Individual port current limiting prevents single fault from affecting other ports
Alternative Models: What chips are recommended as replacements for TPS2553DBVR
Model Brand ILIM (A) Ron (mΩ) Package
TPS2552DBVR TI 0.075-1.7 85 SOT-23-6
TPS2551DBVR TI 0.5-1.2 85 SOT-23-6
TPS22944 TI Fixed 0.9 40 SOT-23-6
MAX14572 Maxim 0.2-2.0 70 TDFN-6
NCP380 onsemi 0.1-2.1 50 DFN-6

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1