Opens in a new tab

TPS2034DR

2.2A USB power switch, 33-mΩ, 2.7-5.5V, active-high enable, overcurrent output, 8-pin SOIC

10870

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2034DR

Package:

8-Pin SOIC (4.9 x 3.9 x 1.27 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS2034DR is a Texas Instruments 2.2-A, 2.7-5.5 V single-channel USB power distribution switch with a 33-mΩ N-channel MOSFET high-side switch. It features short-circuit and thermal protection, overcurrent logic output, undervoltage lockout, and active-high enable. The device is packaged in an 8-pin SOIC and operates from -40°C to +125°C.

Key Specifications

Current Limit 3 A peak, 2.2 A continuous
On Resistance 33 mΩ (5 V input)
Supply Voltage 2.7 V to 5.5 V
Rise Time 6.1 ms (typical)
Standby Current 10 µA (max)
ESD Protection 2 kV HBM
Package 8-Pin SOIC

Features

  • 33-mΩ high-side MOSFET switch
  • Short-circuit and thermal protection
  • Overcurrent logic output (OC)
  • 2.7 V to 5.5 V operating range
  • Logic-level enable input
  • Undervoltage lockout
  • Maximum standby current: 10 µA
  • UL Listed (File No. E169910)

Applications

  • USB power distribution
  • Hot-plug power supply switching
  • PCMCIA slot power control
  • General-purpose high-side switching
  • Notebook computer peripheral power
Product Introduction: TPS2034DR Product Introduction

The TPS2034DR is a Texas Instruments power distribution switch intended for USB applications where heavy capacitive loads and short circuits are likely. It features a 33-mΩ N-channel MOSFET high-side power switch controlled by a logic-level enable input compatible with 5-V and 3-V logic. An internal charge pump controls rise and fall times to minimize current surges. When the output load exceeds the 3-A current limit threshold, the device limits current and pulls the overcurrent (OC) output low. Thermal protection shuts off the switch if junction temperature rises excessively. Undervoltage lockout ensures the switch remains off until valid input voltage is present.

Working Principle: TPS2034DR Working Principle

The TPS2034DR operates as a high-side power switch with three subsystems: (1) The charge pump generates gate drive voltage for the N-channel MOSFET from the 2.7-5.5 V supply, enabling the low 33-mΩ on-resistance. The charge pump also controls the rise and fall times (~6.1 ms) to limit inrush current when switching into capacitive loads. (2) The current limit circuit monitors output current and transitions to constant-current mode at 3 A, pulling the open-drain OC output low to signal the fault condition. (3) The thermal protection circuit monitors junction temperature and shuts off the switch if it exceeds the safe operating limit, with automatic recovery once the device cools. Undervoltage lockout keeps the switch off when input voltage is below the 2.2 V threshold.

Pin Description: TPS2034DR Pin Definition and Functions
Pin Mnemonic Description
1 EN Enable input (active high)
2 GND Ground
3-5 IN Power input (3 pins for current handling)
6 OC Overcurrent output (open drain, active low)
7,8 OUT Power output (2 pins)
Application Scenarios: In which products and applications is TPS2034DR used
  • USB port power switching with 2.2-A current limit and fault reporting
  • Hot-plug power supply control in PCMCIA and CardBus slots
  • Notebook computer peripheral power distribution with inrush limiting
  • General-purpose high-side switching with short-circuit protection
  • Battery-powered system load switching with 10 µA standby current
Alternative Models: What chips are recommended as replacements for TPS2034DR
Model Manufacturer Key Difference
TPS2031DR TI 0.9 A current limit
TPS2032DR TI 1.5 A current limit
TPS2033DR TI 2.2 A current limit
TPS2041DR TI Active-low enable version
LTC1474 ADI Similar USB power switch

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1