Opens in a new tab

TPS1H100AQPWPRQ1

40V/1A automotive high-side switch, AEC-Q100, diagnostics, HTSSOP-14

4200

Effective Inventory

Image for reference only

Manufacturer Part:

TPS1H100AQPWPRQ1

Package:

14-HTSSOP (4.40 x 5.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS1H100AQPWPRQ1 is a Texas Instruments AEC-Q100 qualified 40 V, 100 mΩ single-channel smart high-side power switch with adjustable current limit. It features 4 A continuous output current, high-accuracy current sense (±30 mA at 1 A), programmable current limit (0.5 A to 7 A), open-drain status output, and comprehensive diagnostics. The device is packaged in a 14-pin thermally-enhanced HTSSOP-PWP rated for -40°C to +125°C ambient.

Key Specifications

Operating Voltage 3.5 V to 40 V
RDS(on) 100 mΩ (typical)
Output Current 4 A (continuous)
Current Limit Range 0.5 A to 7 A (adjustable)
Current Sense Accuracy ±30 mA at 1 A
Rating Automotive (AEC-Q100)

Features

  • AEC-Q100 Grade 1 qualified (-40°C to +125°C)
  • 40 V operating voltage with load dump compatibility
  • 100 mΩ RDS(on) integrated NMOS FET
  • Adjustable current limit (0.5-7 A) with ±20% accuracy
  • High-accuracy current sense: ±30 mA at 1 A
  • Open-drain status output (Version A)
  • Standby current <0.5 µA
  • ISO 7637-2 transient immunity

Applications

  • Automotive LED and lighting control
  • Motor and solenoid drive
  • Heater and glow plug control
  • Body electronics and ECU power distribution
Product Introduction: TPS1H100AQPWPRQ1 Product Introduction

The Texas Instruments TPS1H100AQPWPRQ1 is an AEC-Q100 qualified 40V single-channel high-side power switch designed for automotive and industrial load-driving applications. The device integrates a 400 mOhm N-channel MOSFET with comprehensive protection and diagnostic features in a single chip, replacing discrete MOSFET plus gate driver plus sense resistor solutions. The 1A continuous output current rating with 40V maximum input voltage supports driving LEDs, relays, solenoids, and resistive loads in automotive body electronics and industrial systems. The integrated current sense output provides a proportional analog voltage (5 mA/A typical) that enables real-time load current monitoring without an external sense resistor—a critical feature for fault detection and predictive maintenance. Protection features include overcurrent protection (OCP) with auto-retry, thermal shutdown with auto-retry, reverse battery protection, undervoltage lockout (UVLO), and load dump protection to 40V. The open-load detection (OL) in off-state and output short-to-battery (STB) diagnostic allow the system to detect wiring faults before they cause damage. The device is fully specified from -40C to +150C junction temperature, meeting the demands of under-hood automotive applications.

Working Principle: TPS1H100AQPWPRQ1 Working Principle

The TPS1H100A-Q1 operates as a high-side switch, connecting the load between the output (OUT) pin and ground. The internal N-channel MOSFET is driven by a charge-pump gate driver that generates the gate voltage above the supply rail, enabling the use of an N-channel FET (lower RDS-ON than P-channel) as a high-side element. The input (IN) pin controls the switch on/off state with logic-level thresholds compatible with 3.3V and 5V microcontrollers. When the switch is on, current flows from VIN through the MOSFET to the load. The internal current sense amplifier measures the load current by sensing the MOSFET drain current and outputs a proportional current (5 mA/A) on the SNS pin, which is converted to a voltage by an external resistor. When a fault condition is detected (overcurrent, thermal shutdown, or undervoltage), the device turns off the MOSFET and reports the fault on the diagnostic (FAULT) pin. After a programmable retry time, the device automatically attempts to turn on again. The open-load detection works by injecting a small current into the output when the switch is off and measuring the resulting voltage—if the voltage is below the threshold, an open-load condition is indicated. Reverse battery protection is implemented by maintaining the MOSFET in the off-state when VIN is negative relative to ground.

Pin Description: TPS1H100AQPWPRQ1 Pin Definition and Functions
Pin Mnemonic Description
1 VIN Supply input (5-40V)
2 IN Logic input (active high)
3 EN Enable input (active high)
4 DGND Digital ground
5 SNS Current sense output (5mA/A)
6 DIAG_EN Diagnostic enable
7 FAULT Fault output (open-drain, active low)
8-10 OUT Power output (1A max)
11-13 VIN Supply input (parallel connection)
14 PGND Power ground
Application Scenarios: In which products and applications is TPS1H100AQPWPRQ1 used
  • Automotive LED headlight module driving with integrated current monitoring and open-load detection for FMVSS 108 compliance
  • Industrial solenoid valve control with overcurrent protection and auto-retry preventing valve damage from stall conditions
  • Relay driver in automotive body control module (BCM) with reverse battery protection and short-to-battery diagnostics
  • Heated seat element driver with current sense output for temperature estimation and thermal shutdown protection
Alternative Models: What chips are recommended as replacements for TPS1H100AQPWPRQ1
Model Manufacturer Key Difference
TPS1H200AQPWPRQ1 TI 2A version, same package and pinout
BTS50010-1TAE Infineon 10A, PROFET, higher current, larger package
VN5E010ASTR-E ST 1A, VIPower, analog current sense
FDMD8230 Fairchild Discrete dual MOSFET, no diagnostics

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1