Opens in a new tab

ADS1119IPWR

16-bit 4-ch ADC, PGA 1-16x, 860SPS, I2C, TSSOP-14

6500

Effective Inventory

Image for reference only

Manufacturer Part:

ADS1119IPWR

Package:

14-Lead TSSOP (5.0 x 4.4 x 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADS1119IPWR is a Texas Instruments 16-bit 4-channel I2C ADC with programmable gain (1-16x), 4.096V reference, 860SPS, and integrated voltage reference. Packaged in 14-lead TSSOP, -40C to +125C.

Key Specifications

Resolution 16 bits
Channels 4 single or 2 diff
PGA 1, 2, 4, 8, 16
Data Rate 860 SPS max
Reference 4.096 V internal
Interface I2C

Features

  • 16-bit delta-sigma ADC
  • 4 single-ended or 2 differential inputs
  • PGA gain 1x to 16x
  • 860SPS data rate
  • 4.096V internal reference
  • I2C interface with 4 pins
  • Continuous or single-shot mode

Applications

  • Industrial sensor measurement
  • Battery voltage monitoring
  • Weight scale and strain gauge
  • Temperature RTD measurement
Product Introduction: ADS1119IPWR Product Introduction

The ADS1119IPWR is a Texas Instruments 16-bit 4-channel delta-sigma ADC with programmable gain amplifier (PGA) in a 14-lead TSSOP package. The PGA provides gain settings of 1x, 2x, 4x, 8x, and 16x, enabling direct measurement of small signals such as bridge sensors and RTDs without external amplification. The 4.096V internal reference eliminates the need for an external reference in most applications, while an external reference input is available for higher accuracy requirements. The multiplexer supports four single-ended or two differential input configurations. The I2C interface supports standard (100kHz), fast (400kHz), and high-speed (3.4MHz) modes. Data rates from 14SPS to 860SPS are programmable, with higher data rates providing faster conversion but lower effective resolution due to increased noise. The device supports both continuous conversion and single-shot modes, with single-shot mode automatically powering down between conversions to save power. An integrated oscillator eliminates external clock requirements. Packaged in 14-lead TSSOP rated for -40C to +125C.

Working Principle: ADS1119IPWR Working Principle

The ADS1119 uses a second-order delta-sigma modulator followed by a programmable digital decimation filter. The modulator samples the input at a high oversampling ratio (OSR), producing a 1-bit data stream. The decimation filter processes this stream to produce a 16-bit output word at the selected data rate. Higher OSR (lower data rate) provides better noise performance and more effective number of bits (ENOB). The PGA sits before the modulator, amplifying small input signals to utilize more of the modulators dynamic range. At PGA=16x, the full-scale input range is +/-256mV, suitable for bridge and RTD measurements. The multiplexer selects the input channel pair for differential or single-ended measurement. The I2C interface writes configuration to the Config register and reads conversion results from the Data register. A DATA_RDY pin can alert the host when a new conversion is available, reducing I2C polling overhead.

Pin Description: ADS1119IPWR Pin Definition and Functions
Pin Mnemonic Description
1 ADDR I2C address select
2 SCL I2C clock
3 SDA I2C data
4 GND Ground
5 AIN3 Analog input 3
6 AIN2 Analog input 2
7 AIN1 Analog input 1
8 AIN0 Analog input 0
9 REFP Reference positive (or ext ref)
10 REFN Reference negative
11 VDD Supply (2.0-5.5V)
12 DATA_RDY Data ready output
13,14 NC No connect
Application Scenarios: In which products and applications is ADS1119IPWR used
  • Industrial weight scale and strain gauge bridge with PGA=16x for +/-256mV range
  • Battery cell voltage monitoring with 16-bit resolution and 4-channel multiplexing
  • RTD temperature measurement with PGA gain and 4.096V reference
  • Multi-channel industrial sensor acquisition with I2C and 860SPS data rate
Alternative Models: What chips are recommended as replacements for ADS1119IPWR
Model Manufacturer Key Difference
ADS1115 TI Similar 16-bit, 4-ch, 860SPS
ADS1114 TI Single channel, 16-bit
ADS1120 TI 20-bit, similar features
LTC2451 ADI 16-bit, single channel

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1