Opens in a new tab

TLV9101SIDBVR

Single 16V RRIO op amp, 300uV Vos, 1.1MHz, shutdown, SOT-23-6

6800

Effective Inventory

Image for reference only

Manufacturer Part:

TLV9101SIDBVR

Package:

6-Pin SOT-23 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV9101SIDBVR is a Texas Instruments single 16V RRIO op amp with 1.1MHz GBW, +/-300uV Vos, 120uA IQ, 4.5V/us SR, 110dB CMRR, and shutdown. Packaged in SOT-23-6, -40C to +125C.

Key Specifications

Channels 1 (single)
Supply 2.7 V to 16 V
Vos +/-300 uV typical
GBW 1.1 MHz
CMRR 110 dB
SR 4.5 V/us

Features

  • Rail-to-rail input and output
  • +/-300uV offset voltage
  • +/-0.6uV/C offset drift
  • 1.1MHz GBW, 4.5V/us SR
  • 110dB CMRR
  • 120uA quiescent current
  • Shutdown with 0.5uA IQ

Applications

  • Optical module signal conditioning
  • Portable test and measurement
  • Industrial sensor interface
  • Appliance motor control
Product Introduction: TLV9101SIDBVR Product Introduction

The TLV9101SIDBVR is a Texas Instruments single 16V general-purpose operational amplifier in a 6-pin SOT-23 package with shutdown capability. The +/-300uV typical input offset voltage and +/-0.6uV/C drift provide DC precision suitable for sensor signal conditioning and measurement applications. The 1.1MHz GBW and 4.5V/us slew rate support moderate-speed signal processing. The 110dB CMRR is exceptionally high for a 16V RRIO amplifier, providing excellent common-mode noise rejection in industrial environments. The rail-to-rail input and output capability maximizes dynamic range in single-supply systems. The 120uA quiescent current per amplifier enables low-power operation, and the shutdown feature reduces IQ to 0.5uA for battery-powered and power-sequencing applications. The +/-80mA short-circuit current provides robust output drive for driving low-impedance loads. The 77dB EMIRR at 1.8GHz provides immunity to high-frequency EMI in RF-hostile environments. The S-temperature grade extends operation to -40C to +125C. The IDBV suffix indicates SOT-23-6 with shutdown pin. Packaged in SOT-23-6 rated for -40C to +125C.

Working Principle: TLV9101SIDBVR Working Principle

The TLV9101 uses a CMOS input stage with chopper-stabilized offset correction to achieve the +/-300uV offset and +/-0.6uV/C drift specifications. The rail-to-rail input stage uses complementary PMOS and NMOS input pairs that cover the full supply range. The chopper technique periodically samples and nulls the input offset, storing the correction in an auto-zero capacitor. The output stage uses a class-AB push-pull CMOS configuration that swings to both supply rails. The 1.1MHz GBW is set by the dominant-pole compensation. The 4.5V/us slew rate is achieved by the available current to charge the compensation capacitor during large-signal transients. The shutdown pin (SHDN) disables the amplifier output and reduces IQ to 0.5uA. When SHDN is low, the output is high-impedance, allowing wire-OR multiple amplifiers. The 110dB CMRR results from the chopper-stabilized input stage that continuously nulls common-mode-induced offset variations.

Pin Description: TLV9101SIDBVR Pin Definition and Functions
Pin Mnemonic Description
1 SHDN Shutdown (active low)
2 IN+ Non-inverting input
3 IN- Inverting input
4 V- Negative supply / GND
5 OUT Output
6 V+ Positive supply
Application Scenarios: In which products and applications is TLV9101SIDBVR used
  • Optical module TIA and limiting amplifier with 110dB CMRR and 4.5V/us slew rate
  • Portable test and measurement instrument with +/-300uV offset and shutdown mode
  • Industrial sensor bridge amplifier with 77dB EMIRR for RF-noisy environments
  • Appliance motor current sensing with 16V supply and RRIO dynamic range
Alternative Models: What chips are recommended as replacements for TLV9101SIDBVR
Model Manufacturer Key Difference
TLV9102SIDR TI Dual channel version
OPA991SIDBVR TI Similar 36V, higher BW
TLV9061SIDBVR TI 5.5V, lower voltage
TSZ121 ST Similar chopper op amp

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1