Opens in a new tab

TLV9052IDDFR

Dual 5MHz RRIO op amp, 330µA/ch, SOT-23-8

6800

Effective Inventory

Image for reference only

Manufacturer Part:

TLV9052IDDFR

Package:

8-Pin SOT-23 (DDF) (2.9 x 2.8 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV9052IDDFR is a Texas Instruments dual 5MHz GBW RRIO op amp with 1.5V/µs slew rate, 330µA IQ per channel, and 1.8V to 5.5V supply. Packaged in 8-pin SOT-23 (DDF), -40°C to +125°C.

Key Specifications

Channels 2 (dual)
GBW 5 MHz
Slew Rate 1.5 V/µs
IQ 330 µA per channel
Supply 1.8 V to 5.5 V
Vos 0.5 mV typical
Package 8-Pin SOT-23 (DDF)

Features

  • Rail-to-rail input and output
  • 5MHz GBW with 330µA IQ
  • 1.8V to 5.5V single supply
  • 1.5V/µs slew rate
  • EMI hardened inputs
  • SOT-23-8 compact package

Applications

  • Low-power signal conditioning
  • Current sensing
  • Battery-powered instrumentation
  • Portable medical devices
Product Introduction: TLV9052IDDFR Product Introduction

The TLV9052IDDFR is a Texas Instruments dual rail-to-rail input/output CMOS operational amplifier with 5MHz gain-bandwidth product and 330µA per-channel quiescent current, in an 8-pin SOT-23 (DDF) package. The 1.8V to 5.5V supply range supports single-cell Li-ion and 3.3V/5V logic rails. The 5MHz GBW at only 330µA per channel gives an excellent GBW-to-IQ ratio of 15 MHz/mA, making the TLV9052 ideal for battery-powered applications requiring both bandwidth and long battery life. The rail-to-rail input common-mode range extends 200mV beyond both supply rails, and the rail-to-rail output swings within 50mV of the rails with a 10kΩ load. The 0.5mV typical input offset voltage and 1pA input bias current are suitable for precision low-side current sensing and sensor signal conditioning. EMI-hardened inputs reduce susceptibility to RF interference in noisy environments. The DDF (SOT-23-8) package provides a compact footprint for space-constrained designs rated for -40°C to +125°C.

Working Principle: TLV9052IDDFR Working Principle

The TLV9052 uses a complementary CMOS input stage with PMOS and NMOS pairs that provide rail-to-rail input common-mode range. At input voltages near the negative rail, the PMOS pair is active; near the positive rail, the NMOS pair takes over. The transition between pairs is managed by a cross-coupled circuit that minimizes offset voltage shifts across the common-mode range. The 5MHz GBW is set by the dominant-pole compensation capacitor. The class-AB CMOS output stage drives the output to within millivolts of both supply rails. The 330µA per-channel bias current is set by an on-chip reference. EMI filtering is integrated at the input stage to prevent RF rectification.

Pin Description: TLV9052IDDFR Pin Definition and Functions
Pin Mnemonic Description
1 OUT A Output A
2 IN- A Inverting input A
3 IN+ A Non-inverting input A
4 GND Negative supply / GND
5 IN+ B Non-inverting input B
6 IN- B Inverting input B
7 OUT B Output B
8 V+ Positive supply
Application Scenarios: In which products and applications is TLV9052IDDFR used
  • Low-side current sensing with 25mΩ shunt and 5MHz bandwidth for transient detection
  • Battery-powered portable instrument front-end with 1.8V minimum supply
  • Portable medical sensor amplifier with EMI-hardened inputs in clinical RF environment
  • Low-power active filter with 5MHz GBW in SOT-23-8 footprint
Alternative Models: What chips are recommended as replacements for TLV9052IDDFR
Model Manufacturer Key Difference
TLV9052IDR TI SOIC-8 package
OPA2320AIDGKR TI 20MHz, VSSOP-8
MCP6002-I/SN Microchip 1MHz, lower cost
TSV912IDT ST 8MHz, SOIC-8

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1