Opens in a new tab

MPC860SRVR50D4R2

PowerQUICC I MPC860SR, 50MHz Power Architecture, 4 SCCs, ATM UTOPIA, 10/100 Ethernet, 357-TBGA, obsolete

15590

Effective Inventory

Image for reference only

Manufacturer Part:

MPC860SRVR50D4R2

Package:

357-pin TBGA (25x25x1.82 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MPC860SRVR50D4R2 is a PowerQUICC I communications processor from NXP Semiconductors (formerly Freescale). It integrates a 32-bit Power Architecture core running at 50MHz with a Communications Processor Module (CPM) containing 4 SCCs, 2 SMCs, SPI, and I2C. The MPC860SR variant supports ATM over UTOPIA in addition to 10/100 Ethernet. Packaged in a 357-pin TBGA, this device is now obsolete but was widely deployed in networking and communications equipment.

Key Specifications

Core Architecture Power Architecture (MPC8xx)
Core Frequency 50 MHz
Instruction Cache 4 KB
Data Cache 4 KB
On-Chip SRAM 8 KB dual-port
SCCs 4
SMCs 2
Ethernet 10/100 Mbps (MII)
ATM Yes (UTOPIA)
SPI 1
I2C 1
Memory Controller 8 banks (up to 32-bit data bus)
Core Voltage 2.5V
I/O Voltage 3.3V
Package 357-pin TBGA (25×25 mm)
Operating Temperature 0C to +95C (Extended)
Part Status Obsolete

Features

  • 32-bit Power Architecture core with MMU and caches
  • Communications Processor Module (CPM) offloads protocol processing
  • 4 SCCs supporting Ethernet, HDLC, UART, transparent modes
  • 10/100 Ethernet MII interface
  • ATM support via UTOPIA interface (MPC860SR variant)
  • PCMCIA socket controller (2 sockets)
  • 8-bank memory controller for DRAM, SRAM, EPROM, Flash

Applications

  • Router and switch control plane processor
  • T1/E1 channelized communication controllers
  • ATM edge switches and concentrators
  • Industrial protocol gateways
  • Telecom access equipment
Product Introduction: MPC860SRVR50D4R2 Product Introduction

The MPC860SRVR50D4R2 is a PowerQUICC I communications processor from NXP Semiconductors, integrating a 50MHz 32-bit Power Architecture core with a Communications Processor Module (CPM). The MPC860SR variant adds ATM UTOPIA support alongside 10/100 Ethernet, making it suitable for multi-protocol networking equipment. With 4 SCCs, 2 SMCs, SPI, and I2C, the CPM offloads serial communication processing from the core, enabling efficient data plane operation. This device is now obsolete but was extensively used in telecom and networking infrastructure.

Working Principle: MPC860SRVR50D4R2 Working Principle

The MPC860SRVR50D4R2 uses a dual-processor architecture: the main Power Architecture core handles the control plane (OS, routing protocols, management), while the Communications Processor Module (CPM) with its own RISC core handles the data plane (serial I/O, protocol processing). The CPM executes microcode in 8 KB dual-port SRAM, managing 4 SCCs that can independently handle Ethernet, HDLC, UART, or transparent mode protocols. For ATM, the UTOPIA interface connects to external PHY devices, with the CPM performing cell segmentation and reassembly (SAR). The 8-bank memory controller supports glueless interface to DRAM, SRAM, EPROM, and Flash. The core’s MMU provides virtual memory support for embedded Linux or VxWorks operating systems. The PCMCIA controller supports two sockets for expansion cards.

Pin Description: MPC860SRVR50D4R2 Pin Definition and Functions
Pin Group Name Type Function
Core Power VDDH, VDDL Power I/O power (3.3V), Core power (2.5V)
Address/Data A[0:31], D[0:31] Bidirectional 32-bit address and data bus
Ethernet TXD[0:3], RXD[0:3], TX_CLK, RX_CLK MII MII interface to Ethernet PHY
ATM UTOPIA data and control UTOPIA ATM UTOPIA Level-1 master interface
Serial SCC1-4, SMC1-2, SPI, I2C Serial Multi-protocol serial communication pins
Memory CS[0:7], RAS, CAS, WE, OE Control 8-bank memory controller interface
JTAG TCK, TMS, TDI, TDO, TRST JTAG Debug and boundary scan
Application Scenarios: In which products and applications is MPC860SRVR50D4R2 used
Application Circuit Role Key Requirement
Router Control Plane Protocol processing CPU 50MHz Power Arch, 4 SCC, Ethernet
T1/E1 Channelized HDLC/multi-channel controller 4 SCC, time-slot assigner
ATM Edge Switch ATM SAR and cell processing UTOPIA, 4 SCC, ATM microcode
Industrial Gateway Protocol converter Multi-serial, Ethernet, SPI, I2C
Access Concentrator DSLAM controller ATM, Ethernet, 50MHz core
Alternative Models: What chips are recommended as replacements for MPC860SRVR50D4R2
Model Manufacturer Key Difference
MPC860TVR50D4 NXP MPC860T variant, ATM support, PQFP package
MPC855TVR50D4 NXP MPC855T, reduced SCC count
MPC8270VR133D4 NXP PowerQUICC II, 133MHz, 603e core
MPC8313ERVRAGDA NXP PowerQUICC II Pro, e300 core, 333MHz
P1010NSN5FNJ NXP QorIQ P1, e500 core, 400MHz, newer

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1