Opens in a new tab

A4447SLJTR-T

8-50V 2A buck regulator, integrated DMOS, adjustable output 0.8-24V, SOIC-8EP, for industrial 24V bus

7145

Effective Inventory

Image for reference only

Manufacturer Part:

A4447SLJTR-T

Package:

8-SOIC-EP (4.9 x 3.9 x 1.55 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The A4447SLJTR-T is an Allegro MicroSystems high-voltage step-down buck regulator with integrated 450 mΩ DMOS switch. Operating from 8V to 50V input with adjustable output from 0.8V to 24V at up to 2A, it features fixed off-time current mode control, cycle-skipping light-load regulation, and soft start in an 8-pin SOIC-EP package.

Key Specifications

Input Voltage 8V to 50V
Output Voltage 0.8V to 24V (adjustable)
Output Current 2A continuous
Switch On-Resistance 450 mΩ (25°C), 650 mΩ (125°C)
Reference Voltage 0.8V ±2%
Quiescent Current 0.9 mA (operating, VBIAS = VOUT)
Soft Start 10 ms (internal)
Operating Temperature -20°C to +85°C
Package 8-SOIC-EP (4.9 x 3.9 x 1.55 mm)

Features

  • Wide 8V-50V input range supports industrial 24V/36V bus and automotive battery applications
  • Integrated 450 mΩ DMOS switch reduces external component count
  • Fixed off-time current mode control with external resistor programming
  • Cycle-skipping mode maintains regulation at light loads
  • 10 ms internal soft start limits inrush current
  • Thermal shutdown with automatic recovery for robust operation

Applications

  • Industrial 24V bus step-down converter for 5V/3.3V logic supply
  • Point-of-sale (POS) thermal printer power supply
  • Uninterruptible power supply (UPS) auxiliary power rail
  • Automotive 12V/24V battery step-down for MCU supply
  • Motor drive housekeeping power supply from 48V bus
Product Introduction: A4447SLJTR-T Product Introduction

The A4447SLJTR-T is an Allegro MicroSystems high-voltage step-down buck regulator integrating a 450 mΩ N-channel DMOS switch for 2A output current from 8V to 50V input. The output voltage is adjustable from 0.8V to 24V using an external resistor divider with a precision 0.8V ±2% reference. Fixed off-time current mode control, programmed by an external resistor (R_TSET), provides stable operation across varying input and output conditions. The device features cycle-skipping mode for light-load regulation, 10 ms internal soft start, enable control (ENB pin), undervoltage lockout, and thermal shutdown — all in a compact 8-pin SOIC with exposed thermal pad.

Working Principle: A4447SLJTR-T Working Principle

The A4447SLJTR-T uses fixed off-time current mode control where the off-time is set by an external resistor (R_TSET) connected to the TSET pin. During each switching cycle, the internal DMOS switch turns on and current ramps up through the external inductor. When the peak current reaches the threshold set by the error amplifier (proportional to VFB), the switch turns off for the programmed off-time, and the inductor current freewheels through the external Schottky clamp diode. At light loads, the device enters cycle-skipping mode where the switch minimum on-time creates more energy than needed, so the controller skips switching cycles to prevent output voltage rise. The VBIAS pin improves efficiency by powering the internal circuitry from the output voltage (when ≥3.3V) instead of the higher input voltage.

Pin Description: A4447SLJTR-T Pin Definition and Functions
Pin Function
Pin 1 (VIN) Input power supply (8-50V)
Pin 2 (TSET) Off-time programming resistor to GND
Pin 3 (ENB) Enable control (LOW = enabled, open = disabled)
Pin 4 (FB) Feedback voltage input (0.8V reference)
Pin 5 (VBIAS) Bias supply input (connect to VOUT for ≥3.3V output)
Pin 6 (SW) Switch node (DMOS drain, connect to inductor/diode)
Pin 7 (GND) Power ground and signal ground
Pad Exposed thermal pad (connect to GND plane)
Application Scenarios: In which products and applications is A4447SLJTR-T used
  • Industrial 24V DC bus to 5V/3.3V logic power supply at 2A for PLC and HMI
  • POS thermal printer 24V to 12V motor and 5V logic supply
  • UPS 36V/48V battery to 12V auxiliary power rail
  • Automotive 12V battery to 5V ECU microcontroller supply
  • Motor drive 48V bus to 15V gate driver supply
Alternative Models: What chips are recommended as replacements for A4447SLJTR-T
Model Manufacturer Key Difference
A8447SLJTR-T Allegro 3A version in same package
LM5012AMH/NOPB Texas Instruments 1A, 100V buck in SOT-6
LMR16006XDDCR Texas Instruments 600mA 60V buck in SOT-6
TNY287DG Power Integrations Flyback topology alternative
A4407SLJTR-T Allegro 1.5A lower-current variant

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1