Opens in a new tab

Home » Integrated Circuits ICs » SDSDQAF3-008G-I

SDSDQAF3-008G-I

8GB microSDHC card, Class 10/UHS-I, up to 80MB/s read, 11x15mm, SanDisk industrial

7051

Effective Inventory

Image for reference only

Manufacturer Part:

SDSDQAF3-008G-I

Package:

microSDHC (11 x 15 x 1mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SDSDQAF3-008G-I is a SanDisk 8GB microSDHC memory card designed for industrial and embedded applications. It provides reliable non-volatile storage in a microSD form factor with Class 10 / UHS-I speed rating, suitable for data logging, firmware storage, and multimedia content in industrial and consumer devices.

Key Specifications

  • Capacity: 8GB
  • Form Factor: microSDHC
  • Speed Class: Class 10 / UHS-I
  • Read Speed: Up to 80MB/s typical
  • Interface: SD 3.0 / SPI
  • Supply Voltage: 2.7-3.6V
  • Operating Temp: -25C to +85C (standard) / -40C to +85C (industrial)
  • Form Factor: 11 x 15 x 1mm

Features

  • Compact microSD form factor
  • Class 10 video recording capability
  • UHS-I interface for fast data transfer
  • Reliable SanDisk NAND Flash technology
  • Wide compatibility with SD hosts

Applications

  • Industrial data logging and firmware storage
  • Embedded system boot and OS storage
  • Camera and video recording storage
  • IoT device data collection
  • Automotive infotainment media storage
Product Introduction: SDSDQAF3-008G-I Product Introduction

The SDSDQAF3-008G-I from SanDisk is an 8GB microSDHC memory card with UHS-I interface for industrial and embedded data storage applications.

Working Principle: SDSDQAF3-008G-I Working Principle

The microSD card uses NAND Flash memory managed by an internal controller. The controller handles wear leveling, bad block management, and ECC. The SD interface supports both SD and SPI bus modes. UHS-I uses a single data lane at up to 104MHz for up to 104MB/s theoretical transfer rate.

Pin Description: SDSDQAF3-008G-I Pin Definition and Functions
Pin Name Function
1 DAT2 Data line 2 (reserved)
2 CD/DAT3 Card detect / Data line 3
3 CMD Command/Response
4 VDD Power supply (2.7-3.6V)
5 CLK Clock
6 VSS Ground
7 DAT0 Data line 0
8 DAT1 Data line 1 (reserved)
Application Scenarios: In which products and applications is SDSDQAF3-008G-I used
  • Industrial data logging storage
  • Embedded system boot/OS media
  • Camera and video recording
  • IoT device data collection
Alternative Models: What chips are recommended as replacements for SDSDQAF3-008G-I
Model Manufacturer Spec1 Spec2
SDSDQAF3-016G-I SanDisk 16GB microSDHC UHS-I
SDSDQAF3-032G-I SanDisk 32GB microSDHC UHS-I
SQFLS8GM-YYYC-4G-SA Cactus Tech 8GB industrial microSD MLC

Recommend Parts

PESD1LIN,115

Automotive LIN bus ESD protection diode, 15V/24V standoff, SOD-323, AEC-Q101, IEC 61000-4-2 up to 23kV

Brand: NEXPERIA

Package: SOD-323 (SC-76)

IN STOCK: 4826pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TIP35C

NPN power transistor, 100V VCEO, 25A Ic, 125W, TO-247, low saturation voltage, STMicroelectronics

Brand: ST

Package: TO-247 (through-hole, 3-pin)

IN STOCK: 11500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

RTL8211E-VB-CG

Gigabit Ethernet PHY, 10/100/1000Mbps, RGMII, EEE, 48-QFN

Brand: Realtek

Package: QFN-48 (7x7mm)

IN STOCK: 10633pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PCI9052G

PCI bus target interface controller, PQFP-160

Brand: Broadcom

Package: PQFP-160 (28 x 28 mm, 0.5mm pitch)

IN STOCK: 3393pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q64JVSIQ

64Mb Serial NOR Flash, Quad SPI, 133MHz, 8MB, SOIC-8, -40~85°C

Brand: Winbond

Package: SOIC-8 (208mil)

IN STOCK: 34567pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F877-20I

8-bit PIC MCU, 14KB Flash, 368B RAM, 256B EEPROM, 8-ch 10-bit ADC, 2 CCP, 2 comparators, SPI/I2C/USART, PSP, INDUSTRIAL temp -40°C~85°C

Brand: MICROCHIP

Package: 40-pin PDIP / 44-pin PLCC / 44-pin TQFP

IN STOCK: 3156pcs

Cargo cycle: 3-7 Days

The minimum order is 1