Opens in a new tab

INA826AIDR

Precision in-amp, G=1-1000, 150μV Vos, 104dB CMRR, 200μA Iq, ±40V prot, SOIC-8

4286

Effective Inventory

Image for reference only

Manufacturer Part:

INA826AIDR

Package:

SOIC-8 / D (4.9 x 6.0 x 1.58mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The INA826AIDR from Texas Instruments is a precision 200μA instrumentation amplifier with rail-to-rail output in an SOIC-8 package. A single external resistor sets gain from 1 to 1000, with 150μV max offset, 104dB min CMRR at G=10, ±40V input overvoltage protection, and 3V to 36V supply range for industrial sensor signal conditioning.

Key Specifications

Gain Range 1 to 1000 (single external resistor)
Supply Voltage Range 3V to 36V (single) / ±1.5V to ±18V (dual)
Quiescent Current 200μA typ.
Input Offset Voltage 150μV max
Offset Drift 2μV/°C max
Gain Drift 1 ppm/°C (G=1), 35 ppm/°C (G>1) max
Gain Error 0.15% max
Gain Non-Linearity 0.0005% max
CMRR (G=10) 104dB min
CMRR at 5kHz (G=10) 100dB min
PSRR (G=1) 100dB min
Input Bias Current 65nA max
Voltage Noise (1kHz, G≥100) 18nV/√Hz typ.
Bandwidth (G=1) 1MHz
Bandwidth (G=100) 60kHz
Input CM Range Includes V- (up to V+ -1V)
Input Protection ±40V beyond supplies
Output Rail-to-rail
Package SOIC-8 (4.9 x 6.0mm)
Operating Temperature -40°C to +125°C

Features

  • Single resistor gain setting: 1 to 1000
  • Ultra-low 200μA supply current
  • Excellent CMRR: 104dB min at G=10 (DC), 100dB at 5kHz
  • Low offset voltage: 150μV max
  • Low gain drift: 1 ppm/°C at G=1, 35 ppm/°C at G>1
  • Input common-mode range includes negative rail
  • Input overvoltage protection to ±40V
  • Rail-to-rail output for maximum dynamic range
  • 3V to 36V single supply or ±1.5V to ±18V dual supply
  • Low cost instrumentation amplifier solution

Applications

  • Resistive bridge sensor signal conditioning
  • Industrial process control and automation
  • Medical instrumentation (ECG, pressure)
  • Current sensing with shunt resistors
  • Battery monitoring and management
Product Introduction: INA826AIDR Product Introduction

The INA826AIDR from Texas Instruments is a cost-effective precision instrumentation amplifier offering extremely low 200μA power consumption and wide 3V to 36V supply range. A single external resistor sets any gain from 1 to 1000 with excellent gain drift of only 35 ppm/°C max (G>1). The device achieves 104dB min CMRR at G=10 (maintaining 100dB at 5kHz), 150μV max offset voltage, and rail-to-rail output for maximum dynamic range. Input protection circuitry limits input currents to less than 8mA for voltages up to ±40V beyond the supplies, providing robust fault tolerance in industrial environments.

Working Principle: INA826AIDR Working Principle

The INA826 uses a current-feedback three-op-amp instrumentation amplifier topology. The input stage employs matched PNP transistors (Q1, Q2) that level-shift the input voltages up by a diode drop, enabling the common-mode range to include the negative supply rail. Internal amplifiers A1 and A2 drive current through the gain-setting resistor RG, and the resulting differential current is mirrored to the output stage A3. The gain equation is G = 1 + (49.4kΩ / RG), where a single external resistor RG sets the gain from 1 (RG open) to 1000 (RG ≈ 49.4Ω). The rail-to-rail output stage maximizes dynamic range at low supply voltages. Input protection uses series resistors and clamping diodes to limit current to 8mA for input voltages up to ±40V beyond the supplies.

Pin Description: INA826AIDR Pin Definition and Functions
Pin Name Type Function
1 RG1 I/O Gain set resistor connection 1
2 VIN- Input Inverting differential input
3 VIN+ Input Non-inverting differential input
4 V- Power Negative supply / Ground
5 REF Input Reference voltage input (output offset)
6 VO Output Amplifier output (rail-to-rail)
7 V+ Power Positive supply (3V to 36V)
8 RG2 I/O Gain set resistor connection 2
Application Scenarios: In which products and applications is INA826AIDR used
  • Wheatstone bridge sensor conditioning (load cell, pressure, strain gauge)
  • Industrial 4-20mA current loop receiver front-end
  • Medical ECG/EEG differential signal acquisition
  • High-side/low-side current sensing with shunt resistors
  • Battery cell voltage monitoring in multi-cell packs
Alternative Models: What chips are recommended as replacements for INA826AIDR
Manufacturer Part Number Package Notes
TI INA826AIDGKR VSSOP-8 Same specs, smaller package
TI INA828AIDR SOIC-8 Lower noise, 350μA Iq
ADI AD8422ARMZ MSOP-8 Low noise in-amp, 330μA
ST TSZ124IPT TSSOP-14 Quad zero-drift in-amp alternative
Maxim MAX4194ESA+ SOIC-8 Variable gain in-amp, 1-1000

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1