Opens in a new tab

ST 86/238/1,0MM

Heat-shrink tubing, 86/238mm size, 1.0mm wall thickness, polyolefin insulation

7800

Effective Inventory

Image for reference only

Manufacturer Part:

ST 86/238/1,0MM

Package:

Roll/cut length

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ST 86/238/1,0MM is a heat-shrink tubing product, typically from a manufacturer such as Ratioplast or a similar supplier of cable management solutions. The designation indicates a shrink ratio of 86mm expanded to 238mm (or vice versa depending on convention) with a 1.0mm wall thickness, used for insulation and protection of wire harnesses and connections.

Key Specifications

Product Type Heat-Shrink Tubing
Expanded ID 86mm (nominal)
Recovered ID 238mm or shrink ratio per spec
Wall Thickness 1.0mm
Material Polyolefin (typical)
Shrink Ratio Per product specification

Features

  • Precise dimensional specifications for cable management
  • 1.0mm wall thickness for reliable insulation
  • Chemical and moisture resistant
  • Wide operating temperature range
  • Flame retardant options available

Applications

  • Wire harness insulation
  • Cable joint protection
  • Connector sealing
  • Industrial cable management
  • Automotive wiring protection
Product Introduction: ST 86/238/1,0MM Product Introduction

The ST 86/238/1,0MM is a heat-shrink tubing designed for insulation and mechanical protection of wire harnesses, cable joints, and electrical connections. With a 1.0mm wall thickness and specified expansion/recovery dimensions, this tubing provides reliable dielectric insulation and environmental sealing for industrial and automotive cable management applications.

Working Principle: ST 86/238/1,0MM Working Principle

Heat-shrink tubing operates on the principle of cross-linked polymer memory. During manufacturing, the tubing is extruded, cross-linked via irradiation, and then expanded to its delivered size. When heat is applied (typically 90-120C), the tubing shrinks back to its recovered dimension, conforming tightly to the underlying substrate and providing insulation, strain relief, and environmental protection.

Pin Description: ST 86/238/1,0MM Pin Definition and Functions
Parameter Value Unit
Expanded ID 86 mm
Recovered ID Per spec mm
Wall Thickness 1.0 mm
Shrink Temperature 90-120 C
Application Scenarios: In which products and applications is ST 86/238/1,0MM used
  • Wire harness insulation and bundling
  • Cable splice and joint protection
  • Connector backshell sealing
  • Automotive wiring harness protection
  • Industrial equipment cable management
Alternative Models: What chips are recommended as replacements for ST 86/238/1,0MM
Manufacturer Part Number Package Notes
3M FP-301 series Various sizes General purpose shrink tubing
TE Connectivity Raychem series Various sizes High-performance shrink tubing
Panduit SHRINK series Various sizes Commercial grade

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1