Opens in a new tab

A3941KLPTR-T

Full-bridge gate driver, 4x N-ch MOSFET, +/-350mA, AEC-Q100, TSSOP-24, automotive motor drive

10916

Effective Inventory

Image for reference only

Manufacturer Part:

A3941KLPTR-T

Package:

TSSOP-24 (7.80 x 4.40 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The A3941KLPTR-T from Allegro MicroSystems is a full-bridge gate driver IC for N-channel MOSFETs in a TSSOP-24 package. Designed for automotive motor drive applications, it provides charge pump, bootstrap, and comprehensive protection for driving half-bridge or full-bridge power stages.

Key Specifications

Topology Full-bridge gate driver
Driven MOSFETs 4x N-channel
Gate Drive Current +/-350 mA source/sink
Supply Voltage 5.5 V to 50 V
Logic Input 3.3V / 5V compatible
AEC-Q100 Yes
Operating Temperature -40C to +125C

Features

  • AEC-Q100 qualified for automotive applications
  • Full-bridge driver for 4 N-channel MOSFETs
  • Integrated charge pump for 100% high-side duty cycle
  • Cross-conduction protection with adjustable dead time
  • Overcurrent, over-temperature, and undervoltage protection
  • Fault reporting via diagnostic output

Applications

  • Automotive EPS (electric power steering) motor drive
  • Brushed DC and BLDC motor drive
  • Automotive actuator control
  • Industrial motor drive gate driver
Product Introduction: A3941KLPTR-T Product Introduction

The A3941KLPTR-T from Allegro MicroSystems is an AEC-Q100 qualified full-bridge gate driver IC designed for driving four N-channel MOSFETs in automotive motor drive applications. The device provides +/-350mA gate drive current with an integrated charge pump that supports 100% high-side duty cycle operation. Logic inputs are 3.3V and 5V compatible for direct MCU interface. Protection features include cross-conduction prevention with adjustable dead time, overcurrent protection via external sense resistor, over-temperature shutdown, and undervoltage lockout. A diagnostic output reports fault conditions. The device operates from 5.5V to 50V supply in a TSSOP-24 package rated for -40C to +125C.

Working Principle: A3941KLPTR-T Working Principle

The A3941KLPTR-T integrates gate drive, charge pump, and protection for full-bridge motor drive. (1) Gate Drivers: Four gate driver outputs (GH1/GL1, GH2/GL2) drive the high-side and low-side MOSFETs of two half-bridges. Source capability is 350mA and sink capability is 350mA for fast switching. (2) Charge Pump: An internal charge pump generates the gate drive voltage for the high-side MOSFETs above the supply rail, supporting 100% duty cycle operation without bootstrap refresh. (3) Bootstrap: An optional bootstrap diode and capacitor can supplement the charge pump for high-frequency switching. (4) Dead Time: Programmable dead time between high-side and low-side switching prevents cross-conduction. (5) Protection: Overcurrent is detected via an external sense resistor on the SEN pin. Over-temperature shutdown activates at approximately 165C. UVLO disables outputs when VBB drops below threshold. (6) Diagnostics: The FF pin provides fault flag output, and the DIAG pin enables communication of fault type.

Pin Description: A3941KLPTR-T Pin Definition and Functions
Pin Name Type Function
1 VBB Power Supply voltage (5.5-50V)
2,3 GH1/GL1 Output Half-bridge 1 gate drives
4,5 GH2/GL2 Output Half-bridge 2 gate drives
6 SEN Input Current sense input
7-10 IN1/IN2/DIS Input Logic control inputs
11 FF Output Fault flag output
12 VCP I/O Charge pump capacitor
Application Scenarios: In which products and applications is A3941KLPTR-T used
  • Automotive EPS (electric power steering) motor drive with 100% duty cycle
  • Brushed DC motor drive with overcurrent and thermal protection
  • Automotive actuator control with AEC-Q100 qualification
  • Industrial motor drive gate driver with diagnostic fault reporting
Alternative Models: What chips are recommended as replacements for A3941KLPTR-T
Manufacturer Part Number Package Notes
Allegro A3940KLPTR-T TSSOP-28 Half-bridge version
Infineon TLE9201F TSSOP-14 Single half-bridge driver
TI DRV8702-Q1 HTSSOP-24 Similar gate driver
ST L6398 SO-20 Half-bridge driver

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1