Opens in a new tab

A3988SJPTR-T

Dual full-bridge motor driver, 28V/1.2A, PWM current, TSSOP-28, 2 stepper or 4 DC motors

7353

Effective Inventory

Image for reference only

Manufacturer Part:

A3988SJPTR-T

Package:

TSSOP-28 (9.70 x 4.40 x 1.10 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The A3988SJPTR-T from Allegro MicroSystems is a dual full-bridge motor driver for two stepper motors or four DC motors in a TSSOP-28 package. With 28V/1.2A per bridge and PWM current control, it provides complete bipolar motor drive in a compact SMD package.

Key Specifications

Supply Voltage 3.0 V to 28 V
Output Current 1.2 A per bridge (continuous)
Number of Bridges 2 (dual full-bridge)
RDS(on) 0.65 Ohm (HS+LS, typical)
Current Control PWM fixed off-time with blanking
Operating Temperature -20C to +85C

Features

  • Dual full-bridge for two bipolar stepper motors or four DC motors
  • 1.2A continuous per bridge with PWM current regulation
  • Internal fixed off-time PWM current control with blanking
  • 0.65 Ohm total RDS(on) per bridge for low voltage drop
  • Thermal shutdown and overcurrent protection
  • Serial or parallel interface for step and direction control

Applications

  • Dual-axis stepper motor control in CNC and 3D printers
  • Robot arm and pan-tilt mechanism drive
  • Office automation and printer paper feed
  • Automotive instrument cluster gauge motors
Product Introduction: A3988SJPTR-T Product Introduction

The A3988SJPTR-T from Allegro MicroSystems is a dual full-bridge motor driver IC in a TSSOP-28 package. Each full bridge is rated for 1.2A continuous output current at supply voltages up to 28V, with 0.65 Ohm total RDS(on) (high-side plus low-side) per bridge. The two full bridges can independently drive two bipolar stepper motors or four brushed DC motors. Internal PWM fixed off-time current regulation controls the motor current through an external sense resistor, with adjustable blanking time to prevent false current trips during switching transients. The device supports both serial (step/direction) and parallel interface modes for flexible MCU integration. Protection features include thermal shutdown with hysteresis, undervoltage lockout, and crossover current protection. The TSSOP-28 package with exposed thermal pad provides adequate power dissipation for the 1.2A per bridge rating. The A3988 is designed for applications requiring dual-axis motor control in a single compact package.

Working Principle: A3988SJPTR-T Working Principle

The A3988SJPTR-T uses DMOS H-bridge output stages with PWM current regulation. (1) H-Bridge: Each full bridge consists of four N-channel DMOS transistors in an H configuration. The diagonal pairs are switched alternately to reverse current direction through the motor winding. The 0.65 Ohm total RDS(on) minimizes conduction losses at 1.2A. (2) PWM Current Control: An external sense resistor in the ground return path measures the motor current. When the current exceeds the trip point (set by the sense resistor value and reference voltage), the bridge enters the off-time phase where the current decays through a recirculation path. After the fixed off-time, the bridge re-energizes and the cycle repeats. (3) Blanking: A programmable blanking time after each bridge turn-on ignores the current sense signal, preventing false trips from switching transients and parasitic diode reverse recovery. (4) Microstepping: In serial interface mode, the device supports microstepping by modulating the PWM duty cycle to regulate the winding current to intermediate levels between full steps.

Pin Description: A3988SJPTR-T Pin Definition and Functions
Pin Name Type Function
1-2 OUT1A, OUT1B Output Bridge 1 outputs
3-4 OUT2A, OUT2B Output Bridge 2 outputs
5-6 SENSE1, SENSE2 Input Current sense inputs
7-10 CTRL Input Control inputs (direction/step/enable)
11 VDD Power Logic supply (3-5.5V)
12 VBB Power Motor supply (3-28V)
13 GND Ground Ground
Application Scenarios: In which products and applications is A3988SJPTR-T used
  • Dual-axis stepper motor control in CNC and 3D printers with PWM current
  • Robot arm and pan-tilt mechanism drive with 1.2A per bridge
  • Office automation and printer paper feed at 28V supply
  • Automotive instrument cluster gauge motors with thermal protection
Alternative Models: What chips are recommended as replacements for A3988SJPTR-T
Manufacturer Part Number Package Notes
Allegro A4988SETTR-T TSSOP-28 Single stepper, microstepping
TI DRV8833RGWR VQFN-24 Dual H-bridge, 2A
TI DRV8825PWP HTSSOP-28 Single stepper, 2.5A
Toshiba TB6612FNG SSOP-24 Dual H-bridge, 1.2A

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1