Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » ACS722LLCTR-10AU-T

ACS722LLCTR-10AU-T

Hall current sensor 0-10A, 2.4kV isolated, 132mV/A, SOIC-8, pin-select BW

6671

Effective Inventory

Image for reference only

Manufacturer Part:

ACS722LLCTR-10AU-T

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ACS722LLCTR-10AU-T from Allegro MicroSystems is a high-accuracy galvanically isolated Hall-effect current sensor IC in an SOIC-8 package. With 0-10A unidirectional measurement range, 132mV/A sensitivity, 2.4kV RMS isolation, and pin-selectable 80kHz/20kHz bandwidth, it provides economical and precise AC/DC current sensing for industrial and commercial systems.

Key Specifications

Current Range 0 to 10 A (unidirectional)
Sensitivity 132 mV/A (typ @ 3.3V)
Isolation Voltage 2400 Vrms
Bandwidth 80 kHz or 20 kHz (pin-selectable)
Supply Voltage 3.0V to 3.6V
Conductor Resistance 0.65 mOhm (typ)
Operating Temperature -40 to +150 C
Output Type Analog (ratiometric)
Package SOIC-8

Features

  • Galvanically isolated to 2.4kV RMS
  • Pin-selectable bandwidth: 80kHz or 20kHz
  • 0.65mOhm conductor resistance for low power loss
  • Patented digital temperature compensation
  • Chopper-stabilized for near-zero offset drift
  • Integrated shield suppresses capacitive coupling
  • Factory-trimmed sensitivity and quiescent output
  • Ratiometric output from supply voltage
  • Nearly zero magnetic hysteresis
  • UL 60950-1 certified

Applications

  • Motor control and drive systems
  • Load detection and management
  • Switched-mode power supplies
  • Overcurrent fault protection
  • Industrial automation
Product Introduction: ACS722LLCTR-10AU-T Product Introduction

The ACS722LLCTR-10AU-T from Allegro MicroSystems is a high-accuracy galvanically isolated Hall-effect current sensor IC in a compact SOIC-8 package. The suffix LL denotes SOIC-8 package, CTR indicates tape and reel, 10A is the measurement range (0-10A unidirectional), U indicates unidirectional, and T denotes tape and reel packaging. It features 132mV/A sensitivity, 2.4kV RMS isolation, and Allegro patented digital temperature compensation for near closed-loop accuracy in an open-loop sensor. The 0.65mOhm primary conductor resistance minimizes power loss and enables high inrush current withstand capability.

Working Principle: ACS722LLCTR-10AU-T Working Principle

The ACS722 operates through four subsystems: (1) Hall Sensing: Current flowing through the integrated copper conduction path (pins 1-4) generates a magnetic field proportional to the current. A precise linear Hall sensor IC positioned near the conductor detects this field. (2) Signal Processing: The Hall sensor output is processed by a chopper-stabilized BiCMOS IC with patented digital temperature compensation, resulting in extremely stable quiescent voltage and accurate sensitivity over temperature. (3) Pin-Selectable Bandwidth: The BW_SEL pin (pin 6) selects between 80kHz bandwidth for high-speed applications and 20kHz for lower noise performance. (4) Isolation: The conductor path is galvanically isolated from the sensor leads (pins 5-8) with 2.4kV RMS dielectric strength, eliminating the need for external isolation components.

Pin Description: ACS722LLCTR-10AU-T Pin Definition and Functions
Pin Name Type Description
1-2 IP+ Power Primary conductor positive terminal
3-4 IP- Power Primary conductor negative terminal
5 GND Power Ground
6 BW_SEL Input Bandwidth select (high=80kHz, low=20kHz)
7 VIOUT Output Analog output voltage proportional to current
8 VCC Power Supply voltage (3.0-3.6V)
Application Scenarios: In which products and applications is ACS722LLCTR-10AU-T used
  • Motor control phase current sensing with 2.4kV galvanic isolation and 80kHz bandwidth
  • SMPS overcurrent protection with 132mV/A sensitivity and 0.65mOhm insertion loss
  • Industrial load monitoring with pin-selectable 20kHz low-noise mode
  • Battery management current measurement with chopper-stabilized near-zero drift
Alternative Models: What chips are recommended as replacements for ACS722LLCTR-10AU-T
Model Manufacturer Range Isolation Notes
ACS722LLCTR-10AB-T Allegro +/-10A 2.4kV Bidirectional version
ACS723LLCTR-10AU-T Allegro 0-10A 2.4kV Improved accuracy
INA240A1PWR TI Shunt-based N/A Requires shunt resistor
PAC1710-2-AIT-TR DIODES 0-10A N/A Digital output

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1