Opens in a new tab

ACS733KLATR-40AB-T

40A Hall current sensor, 33mV/A, 2.1kV isolation, 120kHz, SOIC-16, 3.3V, AEC-Q100

7411

Effective Inventory

Image for reference only

Manufacturer Part:

ACS733KLATR-40AB-T

Package:

SOIC-16 (10.30 x 7.50 x 2.35 mm, wide body)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ACS733KLATR-40AB-T from Allegro MicroSystems is a 40A Hall-effect current sensor IC in a SOIC-16 package. With 2.1kV isolation and 120kHz bandwidth, it provides galvanically isolated AC/DC current measurement with ratiometric analog output.

Key Specifications

Current Range +/-40 A
Sensitivity 33 mV/A (typical)
Isolation Voltage 2100 Vrms
Bandwidth 120 kHz
Supply Voltage 3.0 V to 3.6 V
Output Type Ratiometric analog (0.5x VCC at 0A)
Operating Temperature -40C to +125C

Features

  • +/-40A current range with 33mV/A sensitivity for motor drive sensing
  • 2100Vrms galvanic isolation for safety-rated high-voltage measurement
  • 120kHz bandwidth supports switching current waveform monitoring
  • 3.3V single supply with ratiometric output for direct ADC connection
  • Integrated conductor eliminates external shunt resistor and isolation amplifier
  • AEC-Q100 qualified for automotive current sensing applications

Applications

  • Motor drive and inverter current sensing at +/-40A
  • Automotive HEV/EV battery current monitoring
  • Solar inverter current measurement with 2.1kV isolation
  • Industrial UPS and power supply load current monitoring
Product Introduction: ACS733KLATR-40AB-T Product Introduction

The ACS733KLATR-40AB-T from Allegro MicroSystems is a fully integrated Hall-effect current sensor IC in a SOIC-16 wide-body package. The device provides galvanically isolated AC/DC current measurement through an integrated primary conductor that carries the current to be measured. The magnetic field generated by the current is sensed by a Hall-effect element and converted to a proportional analog output voltage with 33mV/A sensitivity. The +/-40A measurement range with 2.1kVrms isolation voltage makes the device suitable for motor drive, inverter, and battery monitoring applications where high-voltage isolation is required. The 120kHz bandwidth supports monitoring of switching current waveforms in PWM-driven motor drives and switch-mode power supplies. The 3.3V single supply operation is compatible with modern 3.3V ADCs and microcontrollers. The ratiometric output means the output voltage is proportional to the supply voltage (0.5 x VCC at zero current), which minimizes errors from supply voltage variation when the ADC reference is derived from the same supply.

Working Principle: ACS733KLATR-40AB-T Working Principle

The ACS733KLATR-40AB-T uses Hall-effect sensing with an integrated primary conductor. (1) Primary Conductor: The current to be measured flows through an internal copper conductor (IP+ to IP- pins). This conductor is electrically isolated from the sensing circuitry by the IC molding compound, providing the 2.1kVrms galvanic isolation barrier. (2) Hall Sensing: The current flowing through the primary conductor generates a magnetic field proportional to the current amplitude. A Hall-effect element positioned adjacent to the conductor converts this magnetic field into a small voltage signal. (3) Signal Processing: The Hall voltage is amplified, filtered, and offset-corrected by integrated circuitry. The output stage produces a ratiometric analog voltage: VOUT = (0.5 x VCC) + (Sensitivity x IP), where IP is the primary current. At zero current, the output sits at mid-supply (0.5 x 3.3V = 1.65V). (4) Isolation: The primary conductor and the sensing circuit are separated by the IC package molding compound, which provides the 2.1kVrms dielectric isolation.

Pin Description: ACS733KLATR-40AB-T Pin Definition and Functions
Pin Name Type Function
1-3 IP+ Input Primary current input (common)
4-6 IP- Output Primary current output (common)
7 GND Ground Ground
8 VIOUT Output Analog output voltage
9-11 NC – No connect
12 VCC Power 3.3V supply
Application Scenarios: In which products and applications is ACS733KLATR-40AB-T used
  • Motor drive and inverter current sensing at +/-40A with 120kHz bandwidth
  • Automotive HEV/EV battery current monitoring with AEC-Q100 qualification
  • Solar inverter current measurement with 2.1kV galvanic isolation
  • Industrial UPS and power supply load current monitoring at 3.3V supply
Alternative Models: What chips are recommended as replacements for ACS733KLATR-40AB-T
Manufacturer Part Number Package Notes
Allegro ACS724KLATR-40AB-T SOIC-16 5V version of same device
Allegro ACS37800LAZA-010T0 QSOP-16 Power monitor, 1A-30A
Melexis MLX91211LDC-CAV-000-RE SOIC-8 Hall current sensor, 3.3V
LEM HO 50-NP-0000 PCB mount 50A, external sensor

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1