Opens in a new tab

AD7176-2BRUZ

24-bit 250kSPS sigma-delta ADC, 20µs settling, 2-diff/4-SE inputs, 2.5V ref, TSSOP-24

3450

Effective Inventory

Image for reference only

Manufacturer Part:

AD7176-2BRUZ

Package:

24-lead TSSOP (4.4 x 7.8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD7176-2BRUZ is a 24-bit, 250kSPS sigma-delta ADC from Analog Devices with 20µs settling time. Featuring a crosspoint multiplexer for 2 fully differential or 4 pseudo-differential inputs, it integrates a 2.5V low-drift (2ppm/°C) internal reference. Three selectable digital filters enable optimization for speed, resolution, or 50/60Hz rejection. Packaged in 24-lead TSSOP, it targets high-precision process control and instrumentation.

Key Specifications

Resolution 24-bit
Output Data Rate 5 SPS to 250 kSPS
Settling Time 20µs (sinc5+sinc1 filter)
Input Channels 2 fully differential / 4 pseudo differential
Noise-Free Bits 17 bits @ 250kSPS, 22 bits @ 5 SPS
INL ±2.5 ppm of FSR
Internal Reference 2.5V, 2 ppm/°C drift
Supply Voltage 5V AVDD1; 2-5V AVDD2/IOVDD
Current Consumption 7.8mA (typical)
Interface SPI (3/4-wire), up to 20MHz
Package 24-lead TSSOP (4.4 x 7.8mm)
Operating Temperature -40°C to +105°C

Features

  • 20µs settling enables 50kSPS/channel multiplexed scanning
  • Crosspoint multiplexer for flexible input configuration
  • Three digital filter options: sinc5+sinc1, sinc3, enhanced 50/60Hz rejection
  • Per-channel offset and gain calibration registers
  • 2.5V internal reference with 2ppm/°C drift
  • CRC error checking for SPI communication integrity
  • Simultaneous 50Hz and 60Hz rejection at 27 SPS
  • GPIO pins for external multiplexer control
  • Optional split-supply operation (±2.5V)

Applications

  • Process control: PLC/DCS modules
  • Precision temperature and pressure measurement
  • Medical and scientific multichannel instrumentation
  • Chromatography and analytical instruments
  • Weight scales and force measurement
  • Industrial data acquisition systems
Product Introduction: AD7176-2BRUZ Product Introduction

The AD7176-2BRUZ is a fast-settling, high-precision 24-bit sigma-delta ADC from Analog Devices, optimized for multiplexed low-bandwidth signal acquisition. With a 20µs settling time in sinc5+sinc1 filter mode, it achieves 50kSPS per channel in scanned configurations — far faster than conventional sigma-delta ADCs. The integrated crosspoint multiplexer supports 2 fully differential or 4 pseudo-differential inputs. A 2.5V internal bandgap reference with only 2ppm/°C drift eliminates external reference circuitry. Three programmable digital filters allow trade-offs between speed, resolution, and line-frequency rejection. Per-channel calibration registers correct system offset and gain errors. The 24-lead TSSOP package keeps board area minimal for PLC/DCS modules.

Working Principle: AD7176-2BRUZ Working Principle

The AD7176-2 uses a third-order sigma-delta modulator followed by a configurable digital decimation filter. The modulator oversamples the input at MCLK/16, producing a high-speed bit stream. The digital filter decimates this bit stream into 24-bit output words at rates from 5 SPS to 250 kSPS. The sinc5+sinc1 filter provides fast 20µs settling for multiplexed scanning; the sinc3 filter maximizes resolution at low output rates (22 noise-free bits at 5 SPS); the enhanced filter provides simultaneous 50Hz/60Hz rejection. The crosspoint multiplexer connects any of the 5 analog input pins to the modulator in any differential combination. Calibration is performed by writing offset and gain correction registers per channel. The SPI interface supports CRC error detection for robust communication in noisy industrial environments.

Pin Description: AD7176-2BRUZ Pin Definition and Functions
Pin Name Description
1 AVDD1 Analog supply (5V nominal)
2 AVSS Analog ground (or -2.5V in split supply)
3 REF- Negative reference input
4 REF+ Positive reference input
5 REFOUT Internal 2.5V reference output
6-10 AIN0-AIN4 Analog input pins (multiplexed)
11 AVDD2 Analog supply 2 (2-5V)
12-13 REGCAPA/D Internal LDO decoupling caps
14 IOVDD Digital I/O supply (2-5V)
15 DGND Digital ground
16 DOUT/RDY Data out / data ready output
17 DIN SPI data input
18 SCLK SPI clock input
19 CS Chip select (active low)
20 SYNC/ERROR Synchronization / error output
21-22 GPIO0/1 General-purpose I/O
23-24 XTAL1/2 Crystal / external clock
Application Scenarios: In which products and applications is AD7176-2BRUZ used
  • Multiplexed Temperature Measurement: Connect up to 4 thermocouple or RTD channels through the crosspoint multiplexer. The 20µs settling enables scanning all channels at 50kSPS with full settling. Use the enhanced 50/60Hz filter for industrial environments with power-line noise. Per-channel offset registers compensate for thermocouple cold-junction errors individually.
  • PLC/DCS Analog Input Module: Build a 4-channel, 24-bit analog input module for industrial control. The AD7176-2’s per-channel configuration allows different input ranges and filter settings on each channel. GPIO pins control an external analog multiplexer to expand channel count beyond 4. CRC checking ensures data integrity in electrically noisy environments.
  • Weight Scale and Force Measurement: Connect a load cell’s differential output directly to the AD7176-2. At 5 SPS with sinc3 filter, achieve 22 noise-free bits (0.6ppm resolution) for sub-microvolt signal detection. The 2.5V reference with 2ppm/°C drift maintains accuracy over temperature without an external reference.
Alternative Models: What chips are recommended as replacements for AD7176-2BRUZ
Model Resolution Speed Channels Key Difference
AD7175-2 24-bit 250kSPS 4 diff More channels, buffered inputs
AD7177-2 32-bit 10kSPS 4 diff Higher resolution, lower speed
LTC2499 24-bit 15kSPS 16 ch ADI, more channels, slower
MCP3911A0-E/SS 24-bit 125kSPS 2 ch sim Microchip, simultaneous sampling
ADS1256 24-bit 30kSPS 8 ch TI, 8-channel multiplexer

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1