Opens in a new tab

AD8429ARZ

1nV/√Hz ultra-low noise in-amp, 90dB CMRR, 15MHz BW, G=1-10000, ±4-18V, 8-SOIC

2555

Effective Inventory

Image for reference only

Manufacturer Part:

AD8429ARZ

Package:

8-SOIC (3.9 x 4.9 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD8429ARZ is an ultralow noise instrumentation amplifier from Analog Devices with 1nV/√Hz input noise density — among the lowest available in any in-amp. With 90dB minimum CMRR at G=1, 15MHz bandwidth, 22V/µs slew rate, and gain programmable from 1 to 10,000 via a single resistor, it excels in measuring extremely small signals. The B-grade offers 50µV max input offset and 0.02% gain accuracy. Supplied in 8-pin SOIC for −40°C to +125°C operation.

Key Specifications

Input Voltage Noise 1 nV/√Hz @ 1kHz
Output Voltage Noise 45 nV/√Hz @ 1kHz
Current Noise 1.5 pA/√Hz @ 1kHz
CMRR (DC, G=1) 80/90 dB (A/B grade min)
CMRR (5kHz, G=1) 76/80 dB (A/B grade min)
Input Offset Voltage 150/50 µV (A/B grade max)
Bandwidth (G=1) 15 MHz
Bandwidth (G=100) 1.2 MHz
Slew Rate 22 V/µs
Gain Range 1 to 10,000 (single resistor)
Gain Error (G=1) 0.05/0.02% (A/B grade max)
THD (1kHz, G=1) -130 dBc
Supply Voltage ±4V to ±18V
Supply Current 6.7 mA (typical)
Package 8-SOIC (3.9 x 4.9mm)
Operating Temperature -40°C to +125°C

Features

  • Industry-leading 1 nV/√Hz input voltage noise
  • 90 dB minimum CMRR at G=1 (B grade)
  • 15 MHz bandwidth at G=1, 1.2 MHz at G=100
  • Gain set with single external resistor: G = 1 + (6kΩ/RG)
  • -130 dBc THD at 1kHz for pristine signal quality
  • 22 V/µs slew rate for fast signal acquisition
  • ±4V to ±18V dual supply operation
  • Reference pin for output level shifting
  • Extended temperature range: −40°C to +125°C
  • Pin-compatible with AD8229, AD8421, AD8221

Applications

  • Medical instrumentation (EEG, ECG front-ends)
  • Precision data acquisition systems
  • Microphone preamplification
  • Vibration analysis and accelerometer conditioning
  • Geophone and seismic signal conditioning
  • Low-level sensor amplification
Product Introduction: AD8429ARZ Product Introduction

The AD8429ARZ is the industry’s lowest-noise instrumentation amplifier from Analog Devices, achieving just 1 nV/√Hz input voltage noise density — making it uniquely suited for amplifying microvolt-level signals in noisy environments. The current-feedback architecture provides high bandwidth at high gain (1.2 MHz at G=100), while maintaining 90 dB minimum CMRR at G=1. Gain is set from 1 to 10,000 with a single external resistor using the formula G = 1 + (6kΩ/RG). The device delivers -130 dBc THD at 1kHz, 22 V/µs slew rate, and 0.75µs settling to 0.01%. The reference pin allows output level shifting for single-supply signal chains. The 8-pin SOIC package and -40°C to +125°C operating range suit demanding industrial and medical environments.

Working Principle: AD8429ARZ Working Principle

The AD8429 uses a three-op-amp instrumentation amplifier architecture with a current-feedback input stage. The input stage consists of two matched transconductance amplifiers that convert the differential input voltage to internal current signals. The gain resistor RG determines how much feedback current flows between the two input buffers; a smaller RG increases the feedback current, increasing gain per G = 1 + (6kΩ/RG). The output stage is a difference amplifier that converts the single-ended current signals to a voltage output referenced to the REF pin. The current-feedback topology provides bandwidth that decreases slowly with gain (15 MHz at G=1, 1.2 MHz at G=100), unlike voltage-feedback designs where bandwidth drops proportionally. The input protection circuitry improves settling after large common-mode or differential transients, crucial for multiplexed data acquisition.

Pin Description: AD8429ARZ Pin Definition and Functions
Pin Name Description
1 -IN Inverting input
2 RG Gain resistor terminal 1
3 RG Gain resistor terminal 2
4 +IN Non-inverting input
5 -VS Negative supply voltage
6 REF Reference (output offset) input
7 VOUT Amplifier output
8 +VS Positive supply voltage
Application Scenarios: In which products and applications is AD8429ARZ used
  • Vibration Analysis Front-End: Connect a piezoelectric accelerometer to the AD8429 with G=1000. The 1 nV/√Hz input noise yields a noise floor of ~1.4 nV/√Hz RTI, detecting vibration signals below 0.1 µg/√Hz. The 80 dB CMRR at 5kHz rejects electromagnetic interference from nearby motor drives. The -130 dBc THD preserves spectral purity for FFT-based vibration analysis.
  • EEG/ECG Medical Instrumentation: Amplify biopotential signals (10µV to 5mV) with G=1000. The ultra-low 100 nV p-p noise (0.1-10Hz at G=1000) reveals subtle ECG P-waves and EEG alpha rhythms. The REF pin shifts the output to mid-supply for single-supply ADC interfacing. The 90 dB CMRR rejects 50/60Hz common-mode interference from power lines.
  • Geophone Signal Conditioning: Condition low-frequency geophone outputs in seismic monitoring. The 1 nV/√Hz noise at 1kHz extends to low frequencies with only 2 µV p-p noise (0.1-10Hz at G=1), revealing micro-seismic events. The ±18V supply range accommodates the large dynamic range of seismic signals.
Alternative Models: What chips are recommended as replacements for AD8429ARZ
Model Voltage Noise CMRR (G=1) BW (G=1) Key Difference
AD8429BRZ 1 nV/√Hz 90 dB min 15 MHz B-grade, tighter specs
AD8229BRZ 1 nV/√Hz 80 dB min 15 MHz Previous gen, lower CMRR
INA103 1 nV/√Hz 80 dB min 5 MHz TI/Burr-Brown, lower BW
AD8421BRZ 3.2 nV/√Hz 94 dB min 10 MHz Higher CMRR, higher noise

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1