Opens in a new tab

AD8561AR

Ultrafast single-supply comparator, 7ns propagation delay, 3-10V single supply, integrated latch function, PNP input stage, pin-compatible with LT1016, 8-SOIC package, ADI.

7650

Effective Inventory

Image for reference only

Manufacturer Part:

AD8561AR

Package:

8-Lead SOIC

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD8561AR is an ultrafast single-supply comparator from Analog Devices, featuring 7 ns propagation delay at 5V supply. Designed with separate input and output sections, this comparator allows the input stage to operate from either dual plus/minus 5V supplies or a single +5V supply, while the output section can be independently powered for flexible interfacing. The device integrates a latch function that enables sampling and holding of the comparator output state. With closely matched propagation delays for rising and falling signals across temperature, the AD8561AR preserves input duty cycle at the output, making it ideal for clock recovery applications. The PNP differential input stage provides a wide common-mode input range that extends all the way to the negative supply rail. With pinout compatibility with the industry-standard LT1016 but lower supply current and wider common-mode range, the AD8561AR is offered in an 8-lead SOIC package and is specified over the industrial temperature range of -40 degrees C to +85 degrees C.

Key Specifications

Parameter Value
Propagation Delay (tPD) 7 ns typical at 5V supply
Supply Voltage Range 3 V to 10 V single supply; plus/minus 5V dual supply
Input Common-Mode Range From negative supply rail to within 2.2V of positive supply
Input Stage Type PNP differential input stage
Input Bias Current 3 microamps typical
Input Capacitance 3 pF typical
Rising/Falling Delay Match Closely matched over temperature
Output Type TTL/CMOS compatible
Latch Function Integrated latch for sample-and-hold operation
Supply Current Low power consumption
Minimum Overdrive for 7ns Response 100 mV
Output Sink/Source Current TTL compatible output drive
Package 8-Lead SOIC (SOIC_N, R-8)
Operating Temperature Range -40 degrees C to +85 degrees C
Pin Compatible LT1016
MSL Rating Level 1

Features

  • Ultrafast 7 ns propagation delay at 5V single supply
  • Single supply operation from 3V to 10V
  • Separate input and output supply pins for flexible interfacing
  • Integrated latch function for sampled comparator applications
  • Closely matched rise and fall delays for duty cycle preservation
  • Wide common-mode input range extending to negative supply rail
  • Low power consumption
  • PNP differential input stage with 3 pF input capacitance
  • Pinout compatible with industry-standard LT1016
  • Lower supply current and wider CMR than LT1016
  • Available in PDIP, SOIC, and TSSOP packages
  • Industrial temperature range: -40 degrees C to +85 degrees C
  • LTspice simulation model available
  • RoHS compliant (Z suffix)

Applications

  • High-speed timing and pulse-width discrimination
  • Clock recovery and clock distribution circuits
  • High-speed line receivers and signal detection
  • Digital communication systems and data receivers
  • Phase detectors and frequency discriminators
  • High-speed sampling circuits and track-and-hold
  • Read channel detection in storage systems
  • PCMCIA card and portable instrumentation
  • Zero-crossing detectors and level translators
  • Window comparators and voltage monitoring
Product Introduction: AD8561AR Product Introduction

The AD8561AR is a high-speed single-supply comparator from Analog Devices, delivering 7 ns propagation delay at 5V while consuming very low supply current. This single comparator features separate input and output power supply sections, enabling the input stage to operate from plus/minus 5V dual supplies or a single +5V supply independently from the output supply, providing flexibility for interfacing with different logic families. The PNP differential input stage offers a wide common-mode input range that extends all the way from the negative supply rail to within 2.2V of the positive supply, allowing the device to handle ground-referenced signals in single-supply applications. A key advantage of the AD8561AR is its closely matched propagation delays for rising and falling edges, which remain well matched across temperature variations. This characteristic ensures that the output duty cycle accurately tracks the input duty cycle, making the device particularly well-suited for clock recovery circuits where duty cycle distortion must be minimized. The integrated latch function adds another dimension of versatility, allowing the comparator output to be sampled and held under external control. The AD8561AR is pin-compatible with the industry-standard LT1016 comparator but offers improved performance including lower supply current and a wider common-mode input range. The device is available in 8-lead SOIC (small-outline integrated circuit) package, as well as PDIP and TSSOP options, and is specified for operation over the full industrial temperature range of -40 degrees C to +85 degrees C. For optimal high-speed performance, careful PCB layout practices including ground planes, proper bypass capacitance, and minimizing source impedance are recommended. The AD8561AR is supported by LTspice simulation models and extensive application documentation from Analog Devices.

Working Principle: AD8561AR Working Principle

The AD8561AR is a high-speed voltage comparator that operates by comparing two analog input voltages and producing a digital output indicating which input is larger. The input stage consists of a PNP differential pair that converts the voltage difference between the two inputs into a current difference. This current difference is then amplified by subsequent gain stages and drives an output stage that provides a digital logic level output. The PNP input topology is what gives the AD8561AR its wide common-mode range extending to the negative supply rail, since PNP transistors can operate with their emitters at or near the negative supply voltage. The input bias current of approximately 3 microamps flows out of the inputs (a characteristic of PNP stages), and this current must be considered when choosing source resistance values. The comparator features separate VCC supply pins for the input section and the output section, allowing the output to be powered from a different voltage than the input stage. This enables direct interfacing with different logic families – for example, the input can run from plus/minus 5V while the output runs from a single 5V supply for TTL/CMOS compatibility. The latch function operates by adding a flip-flop stage at the output. When the latch enable is active, the output follows the input comparison result (transparent mode). When the latch is triggered (hold mode), the output state at that moment is captured and held regardless of subsequent input changes. This is useful for sampling applications where the comparison result must be stable during a read operation. The propagation delay of 7 ns represents the time between a step change at the input and the corresponding transition at the output. For best performance, a sufficiently large overdrive voltage (typically 100 mV or more) should be applied, as smaller overdrive voltages result in longer propagation delays.

Pin Description: AD8561AR Pin Definition and Functions
Pin No. Name Description
1 V+ (Input) Positive supply for input stage – connect to positive analog supply (3V to 10V, or +5V for dual)
2 +IN Non-inverting comparator input – connect to signal being monitored
3 -IN Inverting comparator input – connect to reference voltage
4 V- (GND) Negative supply / ground – connect to ground or negative supply
5 LATCH ENABLE Latch enable input – HIGH = transparent (output follows input); LOW = hold (output latched)
6 Q OUTPUT Comparator output – digital logic output indicating comparison result
7 GND (Output) Output ground – ground reference for output stage
8 VCC (Output) Positive supply for output stage – connect to output logic supply
Application Scenarios: In which products and applications is AD8561AR used
  • Clock recovery circuits in high-speed data communication systems
  • High-speed timing and pulse-width measurement circuits
  • Line receivers and signal threshold detection
  • Phase detector and frequency discriminator circuits
  • Zero-crossing detectors for AC signal monitoring
  • Window comparators for voltage window monitoring
  • Sampled data systems and analog-to-digital converter frontends
  • PCMCIA cards and portable test equipment
  • Read channel detection in disk drive and data storage systems
  • Level translation between different voltage domains
Alternative Models: What chips are recommended as replacements for AD8561AR
Model Manufacturer Key Difference
AD8561ARUZ Analog Devices Same comparator in 8-lead TSSOP package, smaller footprint
LT1016 ADI / Linear Tech Pin-compatible predecessor, higher supply current, narrower CMR range
AD790 Analog Devices Fast precision comparator, 40ns, full power supply range, latched output option
AD8611 Analog Devices 4ns ultra-fast comparator, 1.8V supply, single 8-pin, rail-to-rail
LMV7219 Texas Instruments 7ns high-speed comparator, alternative from TI, similar specs

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1