Opens in a new tab

AD8609ARUZ

Precision quad micro-power CMOS op-amp, 50uV offset, 1pA bias current, 22nV/rootHz noise, 1.8-5V single supply, rail-to-rail I/O, 400kHz GBP, 14-TSSOP, ADI.

8920

Effective Inventory

Image for reference only

Manufacturer Part:

AD8609ARUZ

Package:

14-Lead TSSOP

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD8609ARUZ is a precision quad micro-power CMOS operational amplifier from Analog Devices, featuring rail-to-rail input and output operation with extremely low offset voltage and low input bias current. Using a patented trimming technique that achieves superior precision without laser trimming, this quad amplifier delivers 50 microvolt maximum offset voltage, 1 pA maximum input bias current, and 22 nV per root Hz noise density, all while consuming only 50 microamps per amplifier. Operating from a single 1.8V to 5.0V supply or dual plus/minus 0.9V to plus/minus 2.5V supplies, the AD8609ARUZ is ideal for battery-powered and loop-powered instrumentation. The rail-to-rail input and output capability enables direct interfacing with CMOS ADCs, DACs, and ASICs in low-power single-supply systems. Additional features include no phase reversal even with inputs exceeding the supply rails, unity-gain stability, and low distortion. The AD8609ARUZ is packaged in a 14-lead TSSOP and specified over the extended temperature range of -40 degrees C to +125 degrees C.

Key Specifications

Parameter Value
Number of Amplifiers 4 (Quad)
Offset Voltage (VOS) 50 microvolts max at 25C (VS=3.3V, VCM=0.5V & 2.8V)
Offset Voltage Drift 4.5 microvolts per degree C max (-40C to +125C)
Input Bias Current (IB) 1 pA max at 25C; 50 pA max at 85C
Input Offset Current (IOS) 0.5 pA max at 25C
Input Voltage Noise Density 22 nV/root Hz at 10 kHz; 25 nV/root Hz at 1 kHz
Current Noise Density 0.05 fA/root Hz at 1 kHz
0.1Hz-10Hz Noise (p-p) 3.5 microvolts p-p max
Supply Voltage Range 1.8 V to 5.0 V single supply; plus/minus 0.9V to plus/minus 2.5V dual
Supply Current per Amp 50 microamps max at 25C; 60 microamps max at 125C
Gain Bandwidth Product (GBP) 400 kHz typ (RL=100k ohm); 316 kHz typ (RL=10k ohm)
Slew Rate (SR) 0.1 V per microsecond typ
Settling Time (0.1%) 23 microseconds typ (G=1, 2V step)
Common-Mode Rejection Ratio 100 dB typ; 85 dB min (0V to 5V VCM)
Power Supply Rejection Ratio 100 dB typ; 80 dB min
Large Signal Voltage Gain 450 V/mV min (RL=10k ohm)
Input Voltage Range -0.3V to +5.2V (single 5V supply)
Output Voltage Swing Rail-to-rail: 30mV from V-; 30mV from V+ (1mA load)
Short Circuit Current plus/minus 70 mA typ
Channel Separation -115 dB at 10 kHz; -110 dB at 100 kHz
Package 14-Lead TSSOP
Operating Temperature -40 degrees C to +125 degrees C

Features

  • Ultra-low offset voltage: 50 microvolts maximum at 25C
  • Extremely low input bias current: 1 pA maximum
  • Wide single-supply operation: 1.8V to 5.0V
  • Low voltage noise: 22 nV/root Hz at 10 kHz
  • Micropower consumption: 50 microamps per amplifier max
  • Rail-to-rail input and output swing
  • Low total harmonic distortion
  • No phase reversal – even with inputs exceeding supply rails by 1V
  • Unity gain stable with capacitive loads
  • Patented trimming technology – no laser trimming required
  • Input overvoltage protection up to 1V beyond supplies (with series resistor)
  • Excellent channel separation: -115 dB at 10 kHz
  • LTspice simulation model available
  • Available in SOIC and TSSOP packages
  • Extended temperature range: -40C to +125C
  • RoHS compliant

Applications

  • Battery-powered and portable instrumentation
  • Multipole active filters and signal conditioning
  • High-impedance sensor amplification
  • Low-power ASIC input and output amplifiers
  • Loop-powered 4-20mA transmitters
  • Photodiode preamplifiers and optical sensors
  • Data acquisition frontends
  • Medical instrumentation and patient monitoring
  • Wearable and energy-harvesting devices
  • ADC input buffering and DAC output buffering
Product Introduction: AD8609ARUZ Product Introduction

The AD8609ARUZ is a four-channel precision micro-power CMOS operational amplifier from Analog Devices, offering an exceptional combination of low offset voltage, low input bias current, low noise, and extremely low power consumption. Using a proprietary and patented trimming technique, the AD8609 achieves 50 microvolt maximum offset voltage without the need for laser trimming, delivering precision performance that competes with much higher power devices. With a supply current of only 50 microamps per amplifier and operation from supplies as low as 1.8V, this device is exceptionally well-suited for battery-powered and energy-harvesting applications where power budget is extremely constrained. The rail-to-rail input and output architecture ensures maximum dynamic range in single-supply systems, with input voltage extending 0.3V below the negative rail and 0.2V above the positive rail. The output swings to within 30mV of both rails with a 1mA load. A particularly notable feature is the absence of phase reversal, even when the input voltage exceeds the supply rails by up to 1V – a common failure mode in many CMOS amplifiers that can cause system lockup. Input overvoltage protection allows safe operation with inputs up to 1V beyond the supplies when current-limited with a series resistor. The AD8609ARUZ is a member of the AD8603/AD8607/AD8609 family, with single (AD8603), dual (AD8607), and quad (AD8609) versions sharing identical electrical specifications per channel. The quad version is offered in both 14-lead SOIC and 14-lead TSSOP packages, with the TSSOP providing significantly reduced board footprint. All versions are fully specified over the extended industrial temperature range of -40 degrees C to +125 degrees C, and are supported by LTspice simulation models and comprehensive application documentation from Analog Devices.

Working Principle: AD8609ARUZ Working Principle

The AD8609ARUZ is a CMOS operational amplifier designed for low-power precision applications. Its architecture is based on a rail-to-rail input stage that combines P-channel and N-channel differential pairs to achieve input common-mode range from below the negative rail to above the positive rail. At low common-mode voltages, the P-channel pair conducts; at high common-mode voltages, the N-channel pair takes over. The transition between the two pairs occurs in the mid-supply region, and a patented trimming technique ensures that the offset voltage remains low throughout the entire common-mode range, achieving the 50 microvolt maximum specification at the critical points where offset is typically best (at VCM = 0.5V and 2.8V on a 3.3V supply). The gain stage uses a folded cascode architecture to achieve high open-loop gain (typically 1000 V/mV) while maintaining low power consumption. The output stage is a class AB rail-to-rail amplifier that can both source and sink current, driving the output very close to both supply rails. Unity-gain stability is achieved through internal frequency compensation, and the amplifier remains stable with capacitive loads up to reasonable values. The extremely low input bias current (1 pA) is a characteristic of CMOS input transistors, where the gate current is essentially leakage current only. This very low bias current makes the AD8609 suitable for interfacing with high-impedance sources such as photodiodes, piezoelectric sensors, and high-value resistive circuits. The low noise performance of 22 nV/root Hz is achieved through careful design of the input differential pair, balancing thermal noise from the input transistors against the power consumption budget. The patented trimming technology adjusts both offset voltage and input stage matching during manufacturing, achieving precision comparable to laser-trimmed amplifiers but with lower cost and better long-term stability.

Pin Description: AD8609ARUZ Pin Definition and Functions
Pin No. Name Description
1 OUT A Output of amplifier A
2 -IN A Inverting input of amplifier A
3 +IN A Non-inverting input of amplifier A
4 VDD (VS+) Positive supply voltage – 1.8V to 5.0V single supply
5 +IN B Non-inverting input of amplifier B
6 -IN B Inverting input of amplifier B
7 OUT B Output of amplifier B
8 OUT C Output of amplifier C
9 -IN C Inverting input of amplifier C
10 +IN C Non-inverting input of amplifier C
11 GND (VS-) Ground / negative supply voltage
12 +IN D Non-inverting input of amplifier D
13 -IN D Inverting input of amplifier D
14 OUT D Output of amplifier D
Application Scenarios: In which products and applications is AD8609ARUZ used
  • Battery-powered portable test and measurement instruments
  • 4-20mA loop-powered transmitters and industrial sensors
  • Photodiode transimpedance amplifiers for optical sensors
  • High-impedance sensor signal conditioning (piezoelectric, MEMS)
  • Multipole low-power active filters and signal conditioning
  • ADC input buffering and DAC output buffering in low-power systems
  • Medical instrumentation: patient monitoring, portable diagnostics
  • Wearable electronics and energy-harvesting powered devices
  • Low-power ASIC input/output interface amplifiers
  • Data acquisition systems with strict power constraints
Alternative Models: What chips are recommended as replacements for AD8609ARUZ
Model Manufacturer Key Difference
AD8609ARZ Analog Devices Same performance, 14-lead SOIC package instead of TSSOP
AD8607ARMZ Analog Devices Dual version (2 amplifiers), 8-MSOP package, same specs per channel
LTC6078 ADI / Linear Tech Dual micropower precision CMOS op-amp, 125uA, lower noise
MCP6004 Microchip Quad low-power CMOS op-amp, similar specs, alternative vendor
OPA4340 Texas Instruments Quad zero-drift CMOS op-amp, lower offset drift, higher cost

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1