Opens in a new tab

ADA4077-4AR

High precision quad op-amp, 50uV offset, 0.75uV/C drift, 6.9nV/rootHz noise, 3.9MHz GBP, 120dB CMRR/PSRR, 400uA/amp, MSL1, 14-SOIC, ADI ADA4077 family.

5480

Effective Inventory

Image for reference only

Manufacturer Part:

ADA4077-4AR

Package:

14-Lead SOIC

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADA4077-4AR is a high-precision quad operational amplifier from Analog Devices, featuring extremely low offset voltage, ultra-low drift, and low noise while maintaining low power consumption. Part of the ADA4077 family (single/dual/quad), the A-grade quad version delivers 50 microvolt maximum offset voltage at 25C and 0.75 microvolt per degree C maximum drift over the full -40C to +125C temperature range. With only 400 microamps supply current per amplifier, the device achieves 6.9 nV/root Hz voltage noise density, 1 nA maximum input bias current, and 3.9 MHz gain bandwidth product on plus/minus 5V supplies. The dual-supply device operates from plus/minus 2.5V to plus/minus 15V and features CMRR, PSRR, and open-loop gain all exceeding 120 dB minimum. Outputs are stable with capacitive loads greater than 1000 pF with no external compensation. The ADA4077-4AR holds an MSL1 moisture sensitivity rating – the most stringent level – and is specified over the extended industrial temperature range of -40C to +125C. Packaged in a 14-lead SOIC, it is ideal for precision sensor conditioning, process control frontends, instrumentation amplifiers, and precision filter designs.

Key Specifications

Parameter Value (A-grade, Quad SOIC)
Number of Amplifiers 4 (Quad)
Offset Voltage (VOS) @ 25C 50 microvolts max (A-grade); 15 microvolts typ
Offset Voltage Drift 0.75 microvolts per degree C max; 0.4 microvolts per degree C typ
Input Bias Current (IB) @ 25C 1 nA max
Voltage Noise Density (en) 6.9 nV/root Hz typ @ 1 kHz
0.1Hz-10Hz Noise (p-p) 0.25 microvolts p-p typ
Current Noise Density (in) 140 fA/root Hz typ
Gain Bandwidth Product (GBP) 3.9 MHz typ @ plus/minus 5V
Slew Rate (SR) 1.8 V per microsecond typ
Open-Loop Gain (AVO) 120 dB min
Common-Mode Rejection Ratio (CMRR) 120 dB min
Power Supply Rejection Ratio (PSRR) 120 dB min
Supply Voltage Range plus/minus 2.5V to plus/minus 15V (dual); specified at plus/minus 5V to plus/minus 15V
Supply Current per Amp 400 microamps typ; 650 microamps max
Input Voltage Range Within 2V of each supply rail
Output Voltage Swing Within 1.5V of rails (10k ohm load)
Capacitive Load Stability Stable with > 1000 pF load, no external compensation needed
Long-Term Offset Drift 0.5 microvolts typ (10,000 hours)
Temperature Hysteresis 1 microvolt typ
MSL Rating MSL1 (most stringent)
Package 14-Lead SOIC
Operating Temperature -40 degrees C to +125 degrees C

Features

  • Extremely low offset voltage: 50 microvolts maximum (A-grade quad) at 25C
  • Ultra-low offset drift: 0.75 microvolts per degree C max over full temperature range
  • Low input bias current: 1 nA maximum at 25C
  • Low voltage noise: 6.9 nV/root Hz typical at 1 kHz
  • CMRR, PSRR, and AVO all exceed 120 dB minimum
  • Low supply current: 400 microamps per amplifier typical
  • Wide gain bandwidth product: 3.9 MHz at plus/minus 5V supplies
  • Dual-supply operation: plus/minus 2.5V to plus/minus 15V
  • Unity gain stable with capacitive loads > 1000 pF
  • No phase reversal at input overdrive
  • Excellent long-term stability: 0.5 microvolt drift over 10,000 hours
  • Temperature hysteresis: 1 microvolt typical
  • MSL1 rated – highest moisture sensitivity level rating
  • Pin-compatible upgrade for OP4177 and OP400
  • Available in single, dual, and quad configurations
  • B-grade available in single and dual versions for higher precision
  • Extended industrial temperature range: -40C to +125C
  • LTspice simulation model available
  • RoHS compliant

Applications

  • Process control front-end amplifiers and signal conditioning
  • Precision sensor signal conditioning (thermocouples, RTDs, strain gauges)
  • Optical network control circuits and precision diode power measurement
  • Industrial and laboratory instrumentation
  • Precision active filters and analog signal processing
  • Voltage and current measurement circuits
  • Precision level setting and reference buffering
  • Instrumentation amplifier frontends
  • Data acquisition and precision data conversion systems
  • Medical and healthcare precision equipment
Product Introduction: ADA4077-4AR Product Introduction

The ADA4077-4AR is a four-channel high-precision operational amplifier from Analog Devices, designed for demanding precision applications where ultra-low offset, minimal drift, and high common-mode rejection are critical. As the quad member of the ADA4077 family (alongside the single-channel ADA4077-1 and dual-channel ADA4077-2), the ADA4077-4 delivers A-grade precision specifications including 50 microvolt maximum offset voltage at 25C and 0.75 microvolt per degree C maximum offset drift over the full -40C to +125C temperature range. These specifications are achieved through advanced design techniques and precision manufacturing processes, without resorting to chopper stabilization or auto-zero techniques that can introduce switching artifacts and current noise. The device features a bipolar input stage providing 1 nA maximum input bias current – notably lower than many comparably priced precision amplifiers – while achieving 6.9 nV/root Hz voltage noise density. The combination of low offset, low drift, low noise, and low bias current makes the ADA4077-4AR exceptionally versatile for a wide range of precision signal conditioning applications. Operating from dual supplies of plus/minus 2.5V to plus/minus 15V, the amplifier achieves over 120 dB of CMRR, PSRR, and open-loop gain – performance levels typically found in much higher power devices. A particularly valuable feature for production is its MSL1 (Moisture Sensitivity Level 1) rating, the most stringent classification, meaning the device can be stored indefinitely before soldering without dry-packing concerns and is compatible with the most demanding SMT assembly processes. The output is stable with capacitive loads exceeding 1000 pF without external compensation, simplifying design with cables or capacitive sensor interfaces. Long-term drift of only 0.5 microvolts over 10,000 hours and temperature hysteresis of 1 microvolt ensure consistent performance over the lifetime of the end product. The ADA4077-4AR is a pin-compatible performance upgrade for the OP4177 and OP400 families.

Working Principle: ADA4077-4AR Working Principle

The ADA4077-4AR is a precision bipolar operational amplifier that uses a carefully designed input stage and advanced trimming to achieve exceptional DC accuracy. The input stage consists of a carefully matched bipolar differential pair that provides low noise and low bias current. Precision trimming of the input stage offset is performed during manufacturing to achieve the ultra-low 50 microvolt maximum offset specification. The differential pair feeds into a gain stage that uses a cascoded architecture to achieve the extremely high open-loop gain of 120 dB minimum. This high gain is essential for precision applications, as it ensures that the closed-loop gain closely approaches the ideal value set by the external resistor ratio. The output stage is a class AB push-pull amplifier that can drive moderate loads while maintaining linearity. The rail-to-rail capability of the output is limited – the output can swing to within about 1.5V of the supply rails with a 10k ohm load – which is typical for high-voltage precision amplifiers that prioritize accuracy over maximum output swing. The high CMRR of 120 dB minimum is achieved through the matched input pair and careful layout, ensuring that common-mode noise and interference are rejected effectively. Similarly, the high PSRR of 120 dB means that variations in the power supply voltage have minimal effect on the output, which is important for precision circuits in noisy environments. The unity-gain stability with large capacitive loads (over 1000 pF) is achieved through internal frequency compensation that is optimized for both stability and bandwidth. Unlike zero-drift or chopper-stabilized amplifiers that periodically measure and correct offset (introducing switching artifacts and current noise), the ADA4077 achieves its low offset and drift through conventional precision design combined with trimming, resulting in continuous-time operation without switching artifacts. This makes it particularly suitable for applications where any discontinuities or transients in the output would be problematic, such as precision audio, sensor signal conditioning, and data acquisition frontends.

Pin Description: ADA4077-4AR Pin Definition and Functions
Pin No. Name Description
1 OUT A Output of amplifier A
2 -IN A Inverting input of amplifier A
3 +IN A Non-inverting input of amplifier A
4 V+ Positive supply voltage – connect to plus VCC (plus 2.5V to plus 15V)
5 +IN B Non-inverting input of amplifier B
6 -IN B Inverting input of amplifier B
7 OUT B Output of amplifier B
8 OUT C Output of amplifier C
9 -IN C Inverting input of amplifier C
10 +IN C Non-inverting input of amplifier C
11 V- Negative supply voltage – connect to minus VCC (minus 2.5V to minus 15V)
12 +IN D Non-inverting input of amplifier D
13 -IN D Inverting input of amplifier D
14 OUT D Output of amplifier D
Application Scenarios: In which products and applications is ADA4077-4AR used
  • Process control front-end amplifiers for industrial 4-20mA and PLC systems
  • Precision sensor signal conditioning: thermocouples, RTDs, strain gauges, load cells
  • Optical network control circuits and precision laser diode power control
  • High-precision instrumentation amplifiers and difference amplifiers
  • Precision active filters: low-pass, band-pass, Sallen-Key, state-variable
  • Voltage and current reference buffering and precision level setting
  • Data acquisition system frontends and signal conditioning chains
  • Laboratory and test equipment precision analog circuitry
  • Medical instrumentation requiring high accuracy and stability
  • Precision current sources and voltage sources
Alternative Models: What chips are recommended as replacements for ADA4077-4AR
Model Manufacturer Key Difference
ADA4077-4ARUZ Analog Devices Same performance, 14-lead TSSOP package, smaller footprint
ADA4077-2ARZ Analog Devices Dual version, 8-SOIC, B-grade available (25uV offset max)
OP4177 ADI / Analog Devices Previous generation quad precision op-amp, pin-compatible, ADA4077 is upgrade
OPA4171 Texas Instruments Quad low-offset precision op-amp, similar specs, TI alternative
LTC2054 ADI / Linear Tech Quad zero-drift op-amp, lower offset/drift but with chopper artifacts

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1