Opens in a new tab

ADG1404YRUZ

4-CH SP4T Mux, 3.5Ohm RON, +/-15V, 800MHz, TSSOP-16

2345

Effective Inventory

Image for reference only

Manufacturer Part:

ADG1404YRUZ

Package:

TSSOP-16 (5.0 x 4.4 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG1404YRUZ from Analog Devices is a 4-channel SP4T analog multiplexer with 3.5Ohm on-resistance, +/-15V supply, and 800MHz bandwidth in a TSSOP-16 package.

Key Specifications

Type Quad SP4T Analog Multiplexer (iCMOS)
Configuration 4 x SP4T (single-pole, four-throw)
Supply Voltage +/-15V (dual) or 12V (single)
On-Resistance (RON) 3.5 ohm (typical) @ +/-15V
RON Flatness 0.5 ohm (typical)
Charge Injection 0.3 pC (typical)
Switching Time tON 80 ns, tOFF 50 ns
Leakage +/-20 pA (typical @ 25C)
Bandwidth 800 MHz
Package TSSOP-16 (5.0 x 4.4 mm)
Operating Temperature -40C to +125C (Y grade)

Features

  • 4-channel SP4T configuration
  • Ultra-low 3.5 ohm on-resistance
  • 0.3 pC low charge injection
  • 800 MHz signal bandwidth
  • iCMOS process for +/-15V signal handling
  • +/-15V or 12V single supply

Applications

  • Precision signal routing
  • Audio and video switching
  • Medical imaging multiplexing
  • Automatic test equipment
Product Introduction: ADG1404YRUZ Product Introduction

The ADG1404YRUZ from Analog Devices is a 4-channel single-pole, four-throw (SP4T) analog multiplexer built on the iCMOS (industrial CMOS) process. The iCMOS process combines high-voltage DMOS switches with low-power CMOS logic, enabling +/-15V analog signal handling with the low on-resistance and low charge injection of modern switch architectures. The 3.5 ohm typical on-resistance is an order of magnitude lower than the ADG508A (280 ohm), dramatically reducing signal distortion in precision applications. The 0.3 pC charge injection minimizes voltage glitches when switching, preserving signal integrity in sample-and-hold circuits. The 800 MHz bandwidth supports video and RF signal routing. The TSSOP-16 package provides a compact footprint with the Y grade temperature range of -40C to +125C.

Working Principle: ADG1404YRUZ Working Principle

The ADG1404YRUZ uses the iCMOS (industrial CMOS) process to achieve low on-resistance with high-voltage signal handling. Each switch consists of parallel N-channel and P-channel MOSFETs (transmission gate) that provide a relatively constant on-resistance across the full +/-15V analog signal range. The 3.5 ohm RON is achieved through a large switch area with optimized doping profiles, trading die size for low resistance. The 0.3 pC charge injection results from the careful balancing of the N and P channel gate charges, which partially cancel when the switch transitions. The break-before-make switching action prevents momentary channel-to-channel shorts. The 2-bit address selects one of four channels, with the EN pin enabling or disabling the device. The 80 ns tON and 50 ns tOFF enable fast scanning of analog signals.

Pin Description: ADG1404YRUZ Pin Definition and Functions
Pin Name Type Function
1 S1A Analog Channel 1A source
2 S2A Analog Channel 2A source
3 S3A Analog Channel 3A source
4 S4A Analog Channel 4A source
5 DA Analog Mux A drain output
6 A0 Digital Address bit 0
7 A1 Digital Address bit 1
8 GND Power Digital ground
9 VSS Power Negative supply (-15V)
10 DB Analog Mux B drain output
11 S4B Analog Channel 4B source
12 S3B Analog Channel 3B source
13 S2B Analog Channel 2B source
14 S1B Analog Channel 1B source
15 VDD Power Positive supply (+15V)
16 EN Digital Enable (active HIGH)
Application Scenarios: In which products and applications is ADG1404YRUZ used
  • Precision +/-10V signal routing with 3.5Ohm RON and 0.3pC charge injection
  • Medical ultrasound channel multiplexing with 800MHz bandwidth
  • Audio mixing console input selection with low distortion
  • ATE pin electronics signal routing with 80ns switching
Alternative Models: What chips are recommended as replacements for ADG1404YRUZ
Manufacturer Part Number Package Notes
ADI ADG1404YCPZ LFCSP-16 Same function, different package
ADI ADG508AKRZ SOIC-16 8-channel, higher RON (280Ohm)
Maxim DG409DJZ SOIC-16 4-channel differential mux, higher RON
Vishay DG404DJZ-E3 SOIC-16 4-channel SP4T, alternative
ADI ADG1204YRUZ TSSOP-16 Lower capacitance version

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1