Opens in a new tab

ADG508AKRZ

8-CH Analog Mux, +/-15V, 280Ohm RON, SOIC-16

3456

Effective Inventory

Image for reference only

Manufacturer Part:

ADG508AKRZ

Package:

SOIC-16 (9.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG508AKRZ from Analog Devices is an 8-channel high-voltage CMOS analog multiplexer with +/-15V supply, 280-ohm on-resistance, and low leakage in a SOIC-16 package.

Key Specifications

Type 8-Channel Analog Multiplexer
Channels 8 (single-ended) to 1
Supply Voltage +/-15 V (dual supply)
On-Resistance 280 ohm (typical) @ +/-15V
On-Resistance Flatness 40 ohm (typical)
Switching Time 200 ns tON, 150 ns tOFF
Leakage Current 0.1 nA (typical @ 25C)
Charge Injection 10 pC (typical)
Analog Signal Range +/-15 V
Package SOIC-16
Operating Temperature -40C to +85C

Features

  • 8-channel single-ended multiplexer
  • +/-15V dual supply operation
  • 280 ohm low on-resistance
  • 0.1 nA ultra-low leakage current
  • 200 ns switching time
  • Break-before-make switching
  • 3-bit binary address selection

Applications

  • Precision data acquisition systems
  • Industrial process control
  • Medical instrumentation
  • Automatic test equipment
Product Introduction: ADG508AKRZ Product Introduction

The ADG508AKRZ from Analog Devices is an 8-channel high-voltage CMOS analog multiplexer that switches one of eight inputs to a common output based on a 3-bit binary address. The device operates from +/-15V dual supplies, providing an analog signal range of +/-15V for industrial and instrumentation applications. The 280-ohm typical on-resistance and 40-ohm on-resistance flatness minimize signal distortion. The 0.1 nA leakage current at 25C preserves signal integrity in high-impedance circuits. The 200 ns switching time supports moderate-speed scanning applications. The break-before-make switching prevents momentary short-circuiting between channels. The EN pin enables or disables all channels simultaneously. The ADG508A is the 8-channel single-ended version; the ADG509A is the 4-channel differential version in the same SOIC-16 package.

Working Principle: ADG508AKRZ Working Principle

The ADG508AKRZ uses a DMOS (double-diffused MOS) switching structure optimized for high-voltage analog signal handling. Each switch consists of an N-channel and P-channel MOSFET in parallel (transmission gate configuration), which provides a relatively constant on-resistance across the full analog signal range. The 3-bit address input (A0, A1, A2) is decoded by an internal logic circuit that drives the gate of the selected switch pair. The EN pin, when LOW, opens all switches regardless of the address. The break-before-make timing is ensured by an internal delay that opens the currently closed switch before closing the newly selected switch, preventing channel-to-channel crosstalk and momentary shorts. The +/-15V supplies bias the internal level shifters that translate the TTL/CMOS-compatible address and enable logic levels to the gate voltages required to switch the +/-15V analog signals. The 0.1 nA leakage is achieved through careful layout and junction isolation of the switch structures.

Pin Description: ADG508AKRZ Pin Definition and Functions
Pin Name Type Function
1 S1 Analog Channel 1 source input
2 S2 Analog Channel 2 source input
3 S3 Analog Channel 3 source input
4 S4 Analog Channel 4 source input
5 EN Digital Enable (active HIGH)
6 A0 Digital Address bit 0
7 VSS Power Negative supply (-15V)
8 GND Power Digital ground
9 D Analog Common drain output
10 S8 Analog Channel 8 source input
11 S7 Analog Channel 7 source input
12 S6 Analog Channel 6 source input
13 S5 Analog Channel 5 source input
14 A1 Digital Address bit 1
15 A2 Digital Address bit 2
16 VDD Power Positive supply (+15V)
Application Scenarios: In which products and applications is ADG508AKRZ used
  • 8-channel data acquisition with +/-10V sensor inputs scanned at 200ns per channel
  • Precision strain gauge multiplexing with 0.1nA leakage preserving bridge accuracy
  • ATE pin multiplexer for +/-15V DUT signal routing
  • Medical ECG lead selector with 8 inputs and low leakage
Alternative Models: What chips are recommended as replacements for ADG508AKRZ
Manufacturer Part Number Package Notes
ADI ADG509AKRZ SOIC-16 4-channel differential version
Maxim DG508ACJE SOIC-16 Pin-compatible equivalent
Vishay DG508ACWE SOIC-16 Pin-compatible equivalent
ADI ADG1408YRUZ TSSOP-16 iCMOS version, lower RON
Renesas DG508ACWE SOIC-16 Pin-compatible equivalent

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1