Opens in a new tab

Home » Integrated Circuits ICs » ADG849YKSZ

ADG849YKSZ

SPDT analog switch, 0.5Ω RON, 400mA, SC70-6, 1.8-5.5V

1495

Effective Inventory

Image for reference only

Manufacturer Part:

ADG849YKSZ

Package:

SC70-6 / SOT-363 (2.0×1.25×0.9 mm, 0.65mm pitch)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADG849YKSZ from Analog Devices is a 3V/5V CMOS SPDT (single-pole, double-throw) analog switch in a tiny SC70-6 package. With ultra-low 0.5 Ω typical on-resistance, 0.13 Ω RON flatness, and 400 mA continuous current capability, it provides minimal signal distortion for audio routing, battery-powered systems, and relay replacement. Break-before-make switching prevents momentary shorting.

Key Specifications

Switch Configuration SPDT (2:1 Mux/Demux)
On-Resistance (RON) 0.5 Ω typical, 0.8 Ω max @ 5V
RON Flatness 0.13 Ω typical, 0.24 Ω max
Continuous Current 400 mA
Peak Current 600 mA @ 5V
Supply Voltage 1.8V to 5.5V single supply
Bandwidth (-3 dB) 38 MHz typical
Charge Injection 50 pC typical
Off-Leakage 10 pA typical
Crosstalk -64 dB @ 100 kHz
Switching Time 22 ns on, 18 ns off max @ 3.6V
Supply Current 1 nA typical
Operating Temperature -40°C to +125°C
Package SC70-6 (2.0×1.25×0.9 mm)

Features

  • Ultra-low on-resistance: 0.5 Ω typical for minimal signal loss
  • Excellent RON flatness: 0.13 Ω typical for low distortion
  • High current capability: 400 mA continuous, 600 mA peak
  • Rail-to-rail signal handling
  • Break-before-make switching action
  • Ultra-low power: <0.01 µW typical
  • TTL/CMOS compatible control input
  • Pin-compatible upgrade for ADG749 and ADG779

Applications

  • Audio and video signal routing
  • Battery-powered portable devices
  • Cellular phone and PDA signal switching
  • Relay replacement in compact designs
  • Modem and PCMCIA card signal paths
Product Introduction: ADG849YKSZ Product Introduction

The ADG849YKSZ from Analog Devices is a CMOS SPDT analog switch with ultra-low 0.5 Ω on-resistance and 0.13 Ω flatness in a tiny SC70-6 package. Carrying 400 mA continuous current with break-before-make switching, it provides minimal distortion for audio routing, battery-powered systems, relay replacement, and portable device signal switching from 1.8V to 5.5V.

Working Principle: ADG849YKSZ Working Principle

The ADG849YKSZ uses a CMOS transmission gate architecture with parallel N-channel and P-channel MOSFETs to achieve low and flat on-resistance across the rail-to-rail signal range. The N-channel MOSFET provides low resistance for signals near VDD, while the P-channel provides low resistance for signals near GND; together they achieve 0.5 Ω typical RON with 0.13 Ω flatness. The break-before-make circuitry ensures that the normally-open and normally-closed paths are never simultaneously connected, preventing signal shorts during switching transitions. The TTL/CMOS compatible IN control pin selects between the two switch paths. Charge injection (50 pC) is minimized through balanced switch sizing. The ultra-low 1 nA supply current makes it ideal for battery-powered applications where quiescent power must be minimized.

Pin Description: ADG849YKSZ Pin Definition and Functions
Pin Name Type Function
1 VDD Power Positive supply (1.8V-5.5V)
2 GND Power Ground
3 IN Input Switch control (TTL/CMOS compatible)
4 D I/O Common terminal (drain)
5 S1 I/O Normally-closed terminal (S1)
6 S2 I/O Normally-open terminal (S2)
Application Scenarios: In which products and applications is ADG849YKSZ used
  • Audio signal routing: headphone/speaker multiplexing in portable devices
  • Battery-powered instrumentation: sensor channel selection
  • Cellular phone and PDA RF/audio path switching
  • Relay replacement: solid-state switching with no contact bounce
  • Modem, PCMCIA card, and hard drive signal path selection
Alternative Models: What chips are recommended as replacements for ADG849YKSZ
Manufacturer Part Number Package Notes
ADI ADG749YKSZ SC70-6 Previous generation, pin-compatible
ADI ADG779YKSZ SC70-6 Previous generation, pin-compatible
TI TS5A3159DCKR SC70-6 1Ω RON, similar SPDT function
Vishay DG9415EWE SC70-6 0.8Ω RON, SPDT switch
ON Semi NC7SB3157P6X SC70-6 1.8Ω RON, low cost alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1