Opens in a new tab

Home » Integrated Circuits ICs » ADM2587EBRWZ

ADM2587EBRWZ

Signal+power isolated RS-485 transceiver, 500kbps, 2.5kV isolation, ±15kV ESD, 20-SOIC_W, Analog Devices

4132

Effective Inventory

Image for reference only

Manufacturer Part:

ADM2587EBRWZ

Package:

SOIC_W-20 (13.0×7.6×2.35mm, creepage 8mm)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Analog Devices ADM2587EBRWZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver with ±15kV ESD protection. It integrates a 3-channel iCoupler digital isolator, a tri-state differential line driver, a differential input receiver, and an isoPower isolated DC-to-DC converter in a single 20-lead wide-body SOIC package. The ADM2587E supports data rates up to 500kbps and operates from 3.3V or 5V single supply.

Key Specifications

Interface Type RS-485/RS-422 (Half/Full Duplex)
Data Rate 500 kbps (ADM2587E)
Isolation Voltage 2500 V rms (UL 1577, 1 minute)
Working Voltage (VIORM) 560 V peak (VDE 0884-10)
ESD Protection ±15 kV HBM (RS-485 pins)
Supply Voltage 3.3V or 5V (logic side)
Isolated Output 3.3V or 5V (via integrated DC-DC)
Max Nodes on Bus 256
Common-Mode Transient Immunity >25 kV/μs
Receiver Input Sensitivity ±200 mV
Operating Temperature -40°C to +85°C
Package 20-Lead Wide-Body SOIC (SOIC_W)
Package Dimensions 13.0 × 7.6 × 2.35 mm
Safety Approvals UL 1577, VDE 0884-10, CQC GB4943.1

Features

  • Fully integrated signal and power isolation — no external isolated DC-DC required
  • iCoupler technology with chip-scale transformer isolation
  • isoPower integrated isolated DC-to-DC converter
  • Configurable as half-duplex or full-duplex
  • Open- and short-circuit fail-safe receiver inputs
  • Thermal shutdown protection
  • Current limiting and bus contention protection
  • 3.3V or 5V single supply operation
  • High common-mode transient immunity >25 kV/μs

Applications

  • Isolated RS-485/RS-422 interfaces
  • Industrial field networks (Modbus, PROFIBUS)
  • Multipoint data transmission systems
  • Programmable Logic Controllers (PLCs)
  • Building automation
  • Power inverters and motor drives
Product Introduction: ADM2587EBRWZ Product Introduction

The Analog Devices ADM2587EBRWZ is a fully integrated signal and power isolated RS-485/RS-422 transceiver in a 20-lead wide-body SOIC package. It combines ADI’s iCoupler digital isolation technology with an integrated isoPower DC-to-DC converter, eliminating the need for any external isolated power supply. The device supports data rates up to 500kbps, operates from a single 3.3V or 5V supply, and provides 2500V rms isolation (UL 1577) with ±15kV ESD protection on RS-485 bus pins. Configurable as half-duplex or full-duplex, it supports up to 256 nodes on one bus with open/short fail-safe receiver inputs and >25kV/μs common-mode transient immunity.

Working Principle: ADM2587EBRWZ Working Principle

The ADM2587E integrates three functional blocks: (1) iCoupler digital isolators using chip-scale transformer technology — high-speed data crosses the isolation barrier via magnetic coupling through polyimide insulation, providing galvanic isolation; (2) An RS-485 transceiver — the driver converts single-ended TXD to differential signals (A/B) compliant with TIA/EIA-485-A, while the receiver converts differential bus signals back to single-ended RXD; (3) isoPower DC-DC converter — uses high-frequency switching (approximately 180MHz) to transfer power across the isolation barrier via an integrated transformer, generating the isolated supply for the bus-side circuitry. The back-to-back architecture ensures signal integrity and power isolation in a single package. Thermal shutdown and current limiting protect against fault conditions.

Pin Description: ADM2587EBRWZ Pin Definition and Functions
Application Scenarios: In which products and applications is ADM2587EBRWZ used
Alternative Models: What chips are recommended as replacements for ADM2587EBRWZ

ADM2582EBRWZ (16Mbps high-speed variant); ADM2587EBRWZ-REEL7 (tape & reel packaging); ISO1176T (TI, isolated RS-485, requires external DC-DC); MAX14936 (Maxim, isolated RS-485 without integrated power); Si862x (Silicon Labs, digital isolator only)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1