Opens in a new tab

ADP3330ARTZ-2.5-R7

AnyCAP LDO regulator, 200mA, 2.5V fixed, low-noise, 1.4% accuracy

11933

Effective Inventory

Image for reference only

Manufacturer Part:

ADP3330ARTZ-2.5-R7

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

ADP3330ARTZ-2.5-R7 is a 200mA anyCAP LDO regulator with 2.5V fixed output, 150mV dropout, SOT-23-5 package, tape and reel.

Key Specifications

Output Current 200 mA
Output Voltage 2.5V fixed
Dropout Voltage 150 mV at 200mA
Quiescent Current 70 µA
Input Voltage 2.6V to 12V
Package SOT-23-5
Stability anyCAP (stable with any capacitor)

Features

  • anyCAP architecture – stable with any output capacitor
  • 2.5V precision fixed output
  • 150mV low dropout at 200mA
  • Thermal shutdown and current limit
  • SOT-23-5 with enable pin

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: ADP3330ARTZ-2.5-R7 Product Introduction

ADP3330ARTZ-2.5-R7 is a 200mA anyCAP LDO regulator with 2.5V fixed output, 150mV dropout, SOT-23-5 package, tape and reel.

Working Principle: ADP3330ARTZ-2.5-R7 Working Principle

The ADP3330ARTZ-2.5-R7 is an Analog Devices precision analog IC — either a low-dropout regulator, high-resolution ADC, or precision amplifier. Chopper-stabilized or auto-zero architectures achieve microvolt-level offset drift. A charge-balancing or delta-sigma modulator provides 16-24 bit resolution in ADC variants. Low noise and high PSRR ensure signal integrity in precision measurement chains. The device operates from a single supply with rail-to-rail input/output capability.

Pin Description: ADP3330ARTZ-2.5-R7 Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is ADP3330ARTZ-2.5-R7 used
  • Precision measurement and instrumentation
  • Medical device signal chain
  • Industrial process control
  • Low-noise analog front-end
Alternative Models: What chips are recommended as replacements for ADP3330ARTZ-2.5-R7
Model Manufacturer Key Difference
INA219 TI Current/voltage monitor, I2C interface
MCP3424 Microchip 18-bit ADC with I2C, similar resolution

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1