Opens in a new tab

ADS1100A0IDBVR

16-bit, 128SPS, delta-sigma ADC with PGA and I2C in SOT-23-6, self-calibrating, 90µA supply current

8742

Effective Inventory

Image for reference only

Manufacturer Part:

ADS1100A0IDBVR

Package:

SOT-23-6 (2.9 x 2.8mm, 8.12mm²)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADS1100A0IDBVR is a self-calibrating, 16-bit delta-sigma analog-to-digital converter (ADC) manufactured by Texas Instruments. Housed in a tiny SOT-23-6 package, it integrates a programmable gain amplifier (PGA) and an I2C interface, providing a complete data acquisition system in minimal board space. With its low power consumption of only 90µA and wide supply range of 2.7V to 5.5V, it is ideal for portable and battery-powered instrumentation.

Key Specifications

Resolution 16-bit
Architecture Delta-Sigma
Sample Rate 8 SPS to 128 SPS
PGA Gains 1, 2, 4, 8
Interface I2C (up to 3.4MHz High-Speed mode)
Supply Voltage 2.7V to 5.5V
Current Consumption 90µA (typical)
INL 0.0125% of FSR max
Input Type Differential
Package SOT-23-6 (2.9 x 2.8mm)
Operating Temperature -40°C to +85°C

Features

  • Complete data acquisition system in SOT-23-6 package
  • 16-bit resolution with no missing codes
  • Continuous self-calibration for drift-free accuracy
  • Programmable gain amplifier (PGA) with gains of 1, 2, 4, or 8
  • Single-cycle conversion capability
  • Low noise: 4µVp-p
  • Programmable data rate: 8, 16, 32, or 128 SPS
  • Internal system clock — no external components required
  • Eight available I2C addresses
  • Power-down mode in single-conversion mode reduces idle current

Applications

  • Portable instrumentation and measurement devices
  • Industrial process control systems
  • Smart transmitters and 4-20mA loops
  • Battery-powered data loggers
  • Temperature measurement with RTDs and thermocouples
  • Consumer goods and factory automation
Product Introduction: ADS1100A0IDBVR Product Introduction

The ADS1100A0IDBVR is a precision 16-bit delta-sigma ADC from Texas Instruments, integrating a programmable gain amplifier and I2C interface in an ultra-compact SOT-23-6 package. It performs ratiometric conversions using the power supply as reference voltage, eliminating the need for an external reference. The device features continuous self-calibration, ensuring drift-free performance over time and temperature. With PGA gains of 1, 2, 4, or 8, the ADS1100 can measure small differential signals with high resolution. Data rates are programmable from 8 SPS to 128 SPS. In single-conversion mode, the ADC automatically powers down after each conversion, reducing idle current to mere microamps. The I2C interface supports standard (100kHz), fast (400kHz), and high-speed (3.4MHz) modes. Eight pin-selectable I2C addresses allow multiple ADS1100 devices on the same bus.

Working Principle: ADS1100A0IDBVR Working Principle

The ADS1100 employs a second-order delta-sigma modulator followed by a digital decimation filter. The modulator oversamples the input at a frequency much higher than the output data rate, converting the analog input into a high-speed bit stream. The digital filter then decimates this bit stream to produce 16-bit output data. The on-chip PGA amplifies small differential signals before the modulator, enabling measurement of millivolt-level inputs. Self-calibration runs continuously in the background, compensating for offset and gain drift. The configuration register controls data rate, PGA gain, and conversion mode (single or continuous). In single-conversion mode, the ST/BSY bit initiates a conversion and indicates when results are ready.

Pin Description: ADS1100A0IDBVR Pin Definition and Functions
Pin Name Description
1 VDD Positive power supply (2.7V to 5.5V)
2 VSS (GND) Ground reference
3 AIN+ Positive differential analog input
4 AIN- Negative differential analog input
5 SCL I2C serial clock line
6 SDA I2C serial data line (open-drain)
Application Scenarios: In which products and applications is ADS1100A0IDBVR used
  • Portable Instrumentation: The ADS1100’s 90µA operating current and SOT-23-6 footprint make it ideal for handheld multimeters and DMMs. Use PGA gain of 8 to measure millivolt-level signals from shunt resistors or thermocouples directly, with 16-bit resolution providing 1µV LSB at gain 8.
  • Industrial Process Control: In 4-20mA current loop receivers, the ADS1100 digitizes the voltage across a precision shunt resistor. The differential input rejects common-mode noise, while self-calibration maintains long-term accuracy without periodic recalibration. Multiple devices can share the I2C bus using different addresses.
  • Battery-Powered Data Loggers: Single-conversion mode powers down the ADC between readings, extending battery life. At 8 SPS with gain 1, the ADS1100 achieves maximum resolution while consuming minimal energy per measurement cycle.
Alternative Models: What chips are recommended as replacements for ADS1100A0IDBVR
Model Resolution Speed Interface Key Difference
ADS1110 16-bit 240 SPS I2C Higher sample rate variant
ADS1115 16-bit 860 SPS I2C 4-channel MUX, programmable comparator
MCP3424 18-bit 3.75 SPS I2C 4-channel, 18-bit resolution
LTC2485 16-bit 15 SPS I2C Auto-calibration, 2-channel MUX

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1