Opens in a new tab

ADS1246IPWR

24-bit delta-sigma ADC, 1 differential input, PGA 1-128x, 5-2000SPS, 48nVrms noise, 50/60Hz rejection, internal 2.048V ref, SPI, 16-TSSOP, TI ADS1246.

6200

Effective Inventory

Image for reference only

Manufacturer Part:

ADS1246IPWR

Package:

16-Lead TSSOP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADS1246IPWR is a highly integrated, precision 24-bit delta-sigma analog-to-digital converter (ADC) from Texas Instruments, specifically designed for precision sensor measurement applications including temperature sensors (thermocouples, RTDs, thermistors), pressure sensors, and weigh scales. The device features a low-noise programmable gain amplifier (PGA) with gains from 1 to 128, a precision delta-sigma ADC with single-cycle settling digital filter, and an internal oscillator. The ADS1246 provides one differential input and supports data rates up to 2,000 samples per second (SPS). At 20 SPS and below, both 50Hz and 60Hz line frequency interference are simultaneously rejected by the digital filter. With only 2.3 mW power consumption at 5V supply and 20 SPS, the device is suitable for low-power systems. The ADC achieves no missing codes at 24 bits, 15 ppm integral nonlinearity, and 48 nVrms noise at PGA = 128. The ADS1246IPWR is packaged in a 16-lead TSSOP and operates over the industrial temperature range of -40C to +105C.

Key Specifications

Parameter Conditions Min Typ Max Unit
Resolution No missing codes — 24 — Bits
Number of Input Channels 1 differential input 1 (differential) —
Architecture Delta-sigma (ΔΣ) 3rd-order modulator + programmable digital filter —
Programmable Data Rate — 5 — 2000 SPS
PGA Gain Settings — 1, 2, 4, 8, 16, 32, 64, 128 V/V
Input-Referred Noise PGA=128, DR=5 SPS — 48 — nVrms
INL (Integral Nonlinearity) End-point fit, PGA=1 — 6 15 ppm
Offset Error After calibration -15 — +15 µV
Gain Error After calibration -0.02 ±0.005 +0.02 %
CMRR (Common-Mode Rejection) DC, PGA=32 90 125 — dB
PSRR DC, PGA=32, DR=80SPS 100 135 — dB
50Hz/60Hz Rejection DR=20 SPS — 90 — dB
Analog Supply (AVDD) Unipolar or bipolar 2.7 / ±1.35 5 / ±2.5 5.25 / ±2.625 V
Digital Supply (DVDD) — 2.7 3.3 5.25 V
Power Dissipation AVDD=DVDD=5V, 20SPS, ext ref — 2.3 — mW
Power-Down Current — — 0.3 — µA
Internal Reference 2.048V, 10ppm/C max drift 2.038 2.048 2.058 V
Interface SPI-compatible 4-wire SPI, SCLK up to 1MHz —
Internal Oscillator 4.096 MHz nominal 3.89 4.096 4.3 MHz
Internal Temperature Sensor — — 405 — µV/C
Package 16-Lead TSSOP (PW, 6.5mm x 4.4mm) —
Operating Temperature Specified -40 — +105 degrees C

Features

  • 24-bit resolution, no missing codes
  • Programmable data rates: 5 SPS to 2 kSPS
  • Single-cycle settling for all data rates
  • Simultaneous 50Hz and 60Hz rejection at 20 SPS
  • Low-noise PGA: 48 nVrms at PGA = 128
  • Gain settings: 1, 2, 4, 8, 16, 32, 64, 128 V/V
  • One differential analog input (multiplexed)
  • Sensor burn-out detection current sources
  • Internal 2.048 V reference: 10 ppm/C max drift
  • Internal temperature sensor
  • Self and system calibration
  • SPI-compatible serial interface
  • Analog supply: 2.7V to 5.25V unipolar / ±2.5V bipolar
  • Digital supply: 2.7V to 5.25V
  • Low power dissipation: 2.3 mW at 5V, 20 SPS
  • Power-down mode: 0.3 µA
  • Internal 4.096 MHz oscillator (no external crystal needed)
  • 16-lead TSSOP package
  • Industrial temperature range: -40C to +105C operating
  • Specified up to +125C storage

Applications

  • Temperature sensor measurements: RTDs, thermocouples, thermistors
  • Precision weigh scales and load cells
  • Industrial process control and factory automation
  • Pressure transmitters and flow meters
  • Strain gauge and bridge sensor signal conditioning
  • Data acquisition and data logging systems
  • Portable instrumentation
  • Medical instrumentation
  • Automotive sensor interfaces
  • Calibration and measurement equipment
Product Introduction: ADS1246IPWR Product Introduction

The ADS1246IPWR is a highly integrated precision 24-bit delta-sigma analog-to-digital converter from Texas Instruments, optimized for precision sensor measurement applications. As a member of the ADS124x family (which also includes the 4-channel ADS1247 and 8-channel ADS1248), the single-channel ADS1246 provides the same high performance core in a smaller, more cost-effective package for applications requiring only one measurement channel. At the heart of the device is a third-order delta-sigma modulator followed by a programmable digital filter that provides single-cycle settling, meaning full accuracy is achieved on the very first conversion after a channel change or start command – this is particularly valuable in multiplexed systems. The onboard low-noise programmable gain amplifier offers eight gain settings from 1 to 128, allowing the device to handle signals ranging from full-scale volts down to microvolt-level sensor outputs. At the highest gain setting, the input-referred noise is only 48 nVrms, enabling precise measurement of very small signals such as those from thermocouples and strain gauges. The digital filter provides simultaneous rejection of both 50Hz and 60Hz line frequencies at 20 SPS data rate, with rejection exceeding 90 dB. The ADS1246 includes many integrated features that simplify sensor interface design: internal 2.048V reference with only 10 ppm/C maximum drift, internal oscillator eliminating the need for an external crystal, sensor burn-out detection current sources for detecting open or shorted sensor connections, and an internal temperature sensor for cold-junction compensation in thermocouple applications. Self and system calibration capabilities allow offset and gain errors to be corrected in the field. The device operates from a 2.7V to 5.25V analog supply and 2.7V to 5.25V digital supply, with total power dissipation of only 2.3 mW at 5V and 20 SPS. A power-down mode reduces current to 0.3 microamps for battery-powered applications. The ADS1246IPWR is packaged in a 16-lead TSSOP with tape and reel packaging (PWR suffix).

Working Principle: ADS1246IPWR Working Principle

The ADS1246 is a delta-sigma ADC that uses oversampling and noise shaping to achieve high 24-bit resolution. The analog input signal is first passed through the programmable gain amplifier (PGA), which amplifies the signal to optimize use of the ADC full-scale range. The PGA gain is selected through register settings from 1 to 128. The amplified signal is then fed to a third-order delta-sigma modulator, which samples the input at a very high rate (much higher than the output data rate) and produces a 1-bit output stream. The modulator shapes the quantization noise so that most of it falls at frequencies above the signal band, where it can be easily removed. Following the modulator is a digital decimation filter that converts the high-rate 1-bit stream into lower-rate multi-bit samples at the programmed data rate. This digital filter also provides the antialiasing function, greatly reducing the need for analog input filtering. The filter can be programmed for data rates from 5 SPS to 2000 SPS, with a trade-off between noise resolution and speed: lower data rates provide more filtering and therefore better noise performance, while higher rates allow faster measurements. At data rates of 20 SPS and below, the filter is specifically designed to reject both 50Hz and 60Hz line frequencies simultaneously, which is very useful for industrial sensor applications where power line interference is a common concern. A key feature is single-cycle settling: the digital filter achieves full accuracy on the first output sample after a change in input or gain, meaning that even when rapidly switching between measurement configurations, there is no need to discard multiple settling samples. The internal reference voltage of 2.048V is generated by a low-drift bandgap circuit, and the internal oscillator runs at approximately 4.096 MHz, providing all the necessary clock signals for the modulator and digital filter. Communication with the device is through an SPI-compatible serial interface, and the DRDY (data ready) output pin indicates when conversion data is available to read.

Pin Description: ADS1246IPWR Pin Definition and Functions
Pin No. Name Type Description
1 CLK Digital input External clock input. Tie to DGND to use internal oscillator (4.096 MHz nominal).
2 RESET Digital input Active-low reset. Returns all register values to default state.
3 DGND Ground Digital ground.
4 DVDD Digital supply Digital power supply (2.7V to 5.25V).
5 REFP Analog input Positive reference input. Connect to external reference or leave open to use internal 2.048V reference.
6 REFN Analog input Negative reference input. Connect to reference ground.
7 AINP Analog input Positive analog input (differential).
8 AINN Analog input Negative analog input (differential).
9 AVSS Ground Analog negative supply / analog ground.
10 AVDD Analog supply Analog positive supply (2.7V to 5.25V).
11 START Digital input Conversion start. Toggles conversion start/stop.
12 CS Digital input Chip select for SPI interface (active low).
13 DRDY Digital output Data ready. Active low when conversion data is available.
14 DOUT/DRDY Digital output Serial data out. Can also function as DRDY (programmable).
15 DIN Digital input Serial data in for SPI communication.
16 SCLK Digital input Serial clock input for SPI interface.
Application Scenarios: In which products and applications is ADS1246IPWR used
  • Precision temperature measurement with RTDs, thermocouples, and thermistors
  • Weigh scales and load cell signal conditioning
  • Pressure transmitters and industrial pressure measurement
  • Strain gauge measurement and force sensors
  • Flow meters and industrial process control
  • Data acquisition systems and data loggers
  • Portable precision instrumentation
  • Factory automation and PLC analog input modules
  • Medical diagnostic and measurement equipment
  • Calibration standards and reference measurement systems
Alternative Models: What chips are recommended as replacements for ADS1246IPWR
Model Manufacturer Key Difference
ADS1247IPWR Texas Instruments 4-channel version (2 differential inputs), 20-TSSOP, includes IDAC current sources
ADS1248IPWR Texas Instruments 8-channel version (4 differential inputs), 28-TSSOP, full feature set with IDACs and GPIO
ADS1146 Texas Instruments 16-bit version of same architecture, lower resolution, lower cost
AD7790 Analog Devices 16/24-bit low-power sigma-delta ADC for sensors, ADI alternative
LTC2440 ADI / Linear Tech 24-bit delta-sigma ADC with selectable speed/resolution, no PGA

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1