Opens in a new tab

ADUM1200BRZ

Dual-channel 2500Vrms digital isolator, 25Mbps, iCoupler, SOIC-8 narrow body, AEC-Q100

12298

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM1200BRZ

Package:

SOIC-8 Narrow Body (5.0 x 4.0 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADUM1200BRZ from Analog Devices is a dual-channel digital isolator based on iCoupler technology, providing 2500V rms isolation with 25 Mbps data rate. Both channels operate in the same direction (2/0 configuration) and the device features 25kV/us common-mode transient immunity in an SOIC-8 narrow-body package.

Key Specifications

Channels 2 (same direction)
Isolation Rating 2500V rms (1 minute)
Data Rate 25 Mbps (max)
Propagation Delay 28 ns (typ)
Pulse Width Distortion <3 ns
Common-Mode Transient Immunity 25 kV/us (min)
Supply Voltage 2.7V to 5.5V (each side)
Supply Current (per channel) 0.8 mA (typ at 1Mbps)
Operating Temperature -40 to 125 C
Package SOIC-8 (narrow body)

Features

  • iCoupler technology eliminates optocoupler design issues
  • 25 Mbps data rate with low propagation delay
  • 3V/5V level translation between sides
  • AEC-Q100 qualified for automotive applications
  • Refresh circuitry ensures DC correctness

Applications

  • SPI and I2C bus isolation
  • RS-232/422/485 transceiver isolation
  • Motor drive and power supply isolation
  • Medical equipment isolation barriers
  • Battery management system isolation
Product Introduction: ADUM1200BRZ Product Introduction

The ADUM1200BRZ from Analog Devices is a dual-channel digital isolator built on the proprietary iCoupler technology. Unlike traditional optocouplers, iCoupler devices use chip-scale microtransformers for signal transfer across the isolation barrier, providing superior performance with lower power consumption, higher data rates, and better common-mode transient immunity. The ADUM1200BRZ provides 2500V rms isolation with 25 Mbps data rate, making it ideal for isolating high-speed digital interfaces such as SPI, UART, and general-purpose logic signals.

Working Principle: ADUM1200BRZ Working Principle

The ADUM1200BRZ uses Analog Devices iCoupler technology to transfer digital signals across an isolation barrier. **Signal Transfer Subsystem**: On-chip planar microtransformers fabricated on a polyimide insulation layer provide galvanic isolation. Data is encoded on the input side, driven through the transformer as high-frequency pulses, and decoded on the output side. The polyimide insulation provides the 2500V rms isolation rating. **Refresh Mechanism**: A periodic refresh signal is sent across the barrier to maintain the correct output state even when input data is static (DC). If the refresh signal is not received, the output defaults to a predetermined safe state. **Power Isolation**: Each side of the isolator operates from its own independent supply (2.7V to 5.5V), enabling level translation between 3V and 5V logic domains. **EMI Subsystem**: Shielding and careful layout minimize radiated emissions from the high-frequency transformer drive signals.

Pin Description: ADUM1200BRZ Pin Definition and Functions
Pin Name Description
1 VIA Channel A input (side 1)
2 VIB Channel B input (side 1)
3 GND1 Side 1 ground
4 VDD1 Side 1 supply (2.7V to 5.5V)
5 VOA Channel A output (side 2)
6 VOB Channel B output (side 2)
7 GND2 Side 2 ground
8 VDD2 Side 2 supply (2.7V to 5.5V)
Application Scenarios: In which products and applications is ADUM1200BRZ used
  • SPI Isolation: Isolating SPI communication between MCU and high-voltage ADC/DAC in motor drives
  • RS-485 Isolation: Galvanic isolation for RS-485 transceivers in industrial network nodes
  • Medical Equipment: Patient isolation barriers in monitoring and diagnostic devices
  • Battery Management: Isolating communication between battery cell monitors and host controller
  • Power Supply Control: Isolating PWM control signals in isolated DC-DC converters
Alternative Models: What chips are recommended as replacements for ADUM1200BRZ
Model Manufacturer Key Difference
ADUM1201BRZ ADI Reverse direction (0/2 channels)
ISO7221CDR TI 150Mbps, capacitive isolation, SOIC-8
Si8621BC-B-ISR Silicon Labs 150Mbps, capacitive, very low power
HCPL-2531 Broadcom Optocoupler, 10Mbps, dual channel
ISOM8110DFNR TI Opto-emulator, 25Mbps, DFN-8

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1