Opens in a new tab

Home » Thyristors » ADV7122KSTZ50

ADV7122KSTZ50

Triple 8-bit high-speed video DAC, 50MSPS, RGB current output, 48-LQFP, ADI ADV7122KSTZ50

2500

Effective Inventory

Image for reference only

Manufacturer Part:

ADV7122KSTZ50

Package:

48-Lead LQFP (7mm × 7mm), surface mount

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADV7122KSTZ50 is a high-speed, triple 8-bit video digital-to-analog converter (DAC) from Analog Devices, designed specifically for high-resolution video graphics and digital video display applications. Housed in a 48-lead LQFP package, this device integrates three independent 8-bit DAC channels (Red, Green, Blue) with a maximum conversion rate of 50 MSPS, making it suitable for resolutions up to 1280×1024 at standard refresh rates. The ADV7122 accepts 8-bit per channel digital RGB video data and converts it to three analog current outputs that can directly drive a video load. It features an integrated 1.0 V bandgap reference, sync and blanking controls, and a power-down mode that reduces current consumption to microamp levels. Operating from a single 5V supply with low power dissipation, the ADV7122KSTZ50 is ideal for video graphics controllers, set-top boxes, digital TVs, medical imaging displays, and professional video equipment.

Key Specifications

Parameter Value
Manufacturer Analog Devices Inc. (ADI)
Part Number ADV7122KSTZ50
Product Type Triple 8-Bit High-Speed Video DAC
Number of DAC Channels 3 (Red, Green, Blue)
Resolution per Channel 8 bits per DAC (24-bit total color)
Maximum Update Rate 50 MSPS (Mega Samples Per Second)
DAC Architecture Current-steering (current source)
Output Type Current outputs (complementary: IOUT and IOUT)
Full-Scale Output Current 2 mA to 26 mA (programmable via RSET)
Output Compliance Range 1.0 V to 1.4 V (nominal)
Differential Nonlinearity 0.5 LSB typical
Integral Nonlinearity 0.5 LSB typical
Integrated Reference 1.0 V bandgap reference (on-chip)
Sync Function Integrated TTL sync on green (composite sync)
Blanking Control BLANK input, common blanking of all three DACs
Supply Voltage 4.5 V to 5.5 V (single 5V supply)
Power Consumption 90 mW typical @ 3.3V; 150 mW typ @ 5V (active)
Power-Down Mode Yes, < 10 μA standby
Operating Temperature -40°C ~ +85°C (industrial)
Package / Case 48-Lead LQFP (7mm × 7mm)
Mounting Type Surface Mount
Data Interface Parallel 8-bit × 3 (RGB)
RoHS RoHS Compliant
Product Status Active

Features

  • Triple 8-bit high-speed video DAC (3 × 8-bit = 24-bit color)
  • Up to 50 MSPS maximum update rate
  • Supports resolutions up to 1280 × 1024 pixels
  • Three independent DAC channels: R, G, B
  • Current-steering architecture
  • Complementary current outputs per channel
  • Programmable full-scale current: 2mA ~ 26mA
  • On-chip 1.0 V bandgap reference
  • Integrated TTL sync-on-green (composite sync)
  • Common blanking control (BLANK pin)
  • Low glitch: 0.5 nV·s typical
  • Excellent DNL and INL: 0.5 LSB typ
  • Single 5V power supply operation
  • Power-down mode (< 10 μA)
  • Industrial temperature range: -40°C ~ +85°C
  • 48-lead LQFP compact package
  • RoHS compliant

Applications

  • Video graphics controllers and display systems
  • Digital video output interfaces
  • Set-top boxes and digital TV
  • Medical imaging and diagnostic displays
  • Professional video equipment and switchers
  • Video wall processors
  • Industrial and avionic displays
  • High-resolution CRT and LCD drivers
  • Video test pattern generators
  • RGB DAC-based color graphics systems
Product Introduction: ADV7122KSTZ50 Product Introduction

The ADV7122KSTZ50 is a triple 8-bit high-speed video digital-to-analog converter from Analog Devices, optimized for high-resolution video graphics and digital display applications. This device integrates three independent 8-bit current-steering DAC channels — one each for Red, Green, and Blue video signals — capable of operating at update rates up to 50 mega-samples per second, supporting display resolutions up to 1280×1024 at standard VESA refresh rates. Each DAC channel provides complementary current outputs (IOUT and IOUT-bar), giving the system designer flexibility in configuring the load termination and output voltage swing. The full-scale output current is programmable from 2 mA to 26 mA via a single external resistor (RSET), allowing optimization for different display types and load impedances. The ADV7122 incorporates a 1.0 V on-chip bandgap voltage reference that eliminates the need for an external reference in most applications. Key video-specific features include a common blanking input (BLANK) that simultaneously forces all three DAC outputs to blanking level (zero output current) for video retrace intervals, and integrated TTL-level sync-on-green functionality that adds composite sync information to the green channel output, reducing external component count in systems that use sync-on-green video standards. The current-steering architecture delivers excellent dynamic performance with low glitch energy (0.5 nV·s typical), ensuring clean video transitions without visible artifacts. The device operates from a single 5V supply with modest power consumption, and features a power-down mode that reduces supply current to less than 10 microamps for power-sensitive applications. Housed in a compact 48-lead LQFP package with industrial temperature range (-40°C to +85°C), the ADV7122KSTZ50 is a versatile video DAC solution for graphics controllers, set-top boxes, medical imaging displays, and professional video equipment.

Working Principle: ADV7122KSTZ50 Working Principle

The ADV7122 is a current-steering (also called current-mode or current-source) video DAC. Each of its three 8-bit DAC channels contains an array of 255 equally weighted current sources plus a constant bias current. Each current source is switched to either the IOUT output or the IOUT (complementary) output based on the corresponding bit value in the input digital word — bits set to ‘1’ direct their current to IOUT, while bits set to ‘0’ direct their current to IOUT. The sum of IOUT and IOUT always equals the full-scale current, making the outputs complementary. This architecture is preferred for high-speed video applications because it achieves very fast switching speeds — the current sources can be switched on and off in sub-nanosecond times — and produces low glitch energy because both outputs always carry current (no sudden current steps to zero). The full-scale output current is set by an external resistor RSET connected to the FS ADJUST pin, which programs a reference current that is mirrored to all 255 individual current sources. The on-chip 1.0 V bandgap reference provides a stable voltage reference for the reference current generator. The three DACs share a common clock input (CLK), and all three channels update simultaneously on each clock edge, ensuring perfect channel-to-channel alignment — critical for maintaining proper color balance and timing in RGB video systems. The BLANK input, when asserted, overrides the digital inputs and forces all three DAC outputs to blanking level (zero output current), which corresponds to the black level in video signals. The sync function for the green channel (sync-on-green) is implemented by adding a controlled current step to the green DAC output during the sync interval, embedding the horizontal and vertical sync pulses into the green channel’s analog output. Overall, this architecture delivers the speed, precision, and video-specific features required for high-performance analog video display systems.

Pin Description: ADV7122KSTZ50 Pin Definition and Functions

The ADV7122KSTZ50 is packaged in a 48-lead LQFP. Key pin groups:

Pin Group Pins Description
Red Data Inputs 1-8 DR0-DR7 — 8-bit Red channel data bus
Green Data Inputs 9-16 DG0-DG7 — 8-bit Green channel data bus
Blue Data Inputs 17-24 DB0-DB7 — 8-bit Blue channel data bus
Clock & Control 25-30 CLK, BLANK, SYNC, PSAVE, COMP
Power & Ground 31-36, 42-45 VCC (5V), GND, VAA (analog), GND
Reference 37-40 VREF, RSET, IRES, BIAS
Analog Outputs 41, 46-48 IOUT_R, IOUT_G, IOUT_B, complementary outputs

Note: Exact pin numbers may vary depending on package variant. Refer to the official ADV7122 datasheet for complete pin assignments, package dimensions, and recommended PCB layout guidelines.

Application Scenarios: In which products and applications is ADV7122KSTZ50 used
  • Video Graphics Controllers: Serves as the RAMDAC (RAM + DAC) output stage in VGA/SVGA graphics controllers and display adapters, converting digital framebuffer RGB data to analog video signals for CRT and analog LCD monitors
  • Digital Set-Top Boxes & TVs: Used in digital TV receivers, cable/satellite set-top boxes, and DVD/Blu-ray players as the analog video output stage for component video (YPbPr) and RGB outputs
  • Medical Imaging Displays: Found in ultrasound machines, patient monitors, and diagnostic imaging equipment where accurate DNL/INL and consistent channel matching ensure reliable color and grayscale reproduction
  • Professional Video Equipment: Used in video production switchers, character generators, broadcast monitors, and video test equipment where high-speed, low-glitch DAC performance is critical for signal integrity
  • Video Wall Processors: Deployed in multi-display video wall controllers and matrix switchers requiring high-channel-count, high-speed DACs per output
  • Industrial & Avionics Displays: Used in cockpit displays, HMI panels, and ruggedized industrial monitors requiring reliable operation over wide temperature ranges (industrial -40°C to +85°C range)
  • Video Test Pattern Generators: Forms the core of programmable video test generators that produce precise analog video test signals with controlled timing and amplitude for display and video equipment testing
  • Machine Vision & Inspection Systems: Used in industrial camera systems and automated optical inspection equipment as the analog video output or reference signal source
Alternative Models: What chips are recommended as replacements for ADV7122KSTZ50
Part Number Manufacturer Resolution Speed Channels Package
ADV7122KSTZ50 ADI 3×8-bit 50MSPS 3 (RGB) 48-LQFP
ADV7123KSTZ140 ADI 3×10-bit 140MSPS 3 (RGB) 48-LQFP
ADV7120KSTZ50 ADI 3×8-bit 50MSPS 3 (RGB) 44-MQFP
ADV7125 ADI 3×8-bit 330MHz 3 (RGB) 48-LQFP
THS8134A Texas Instruments 3×8-bit 80MSPS 3 (RGB) 48-HTQFP
DAC-2808 IDT 3×8-bit 140MSPS 3 (RGB) 48-LQFP

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1