Opens in a new tab

ADXL362BCCZ-R2

3-Axis MEMS Accelerometer, 270nA Wake-Up, 12-bit, SPI, WLCSP-16

3456

Effective Inventory

Image for reference only

Manufacturer Part:

ADXL362BCCZ-R2

Package:

WLCSP-16 (3.25 x 3.25 x 0.94 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ADXL362BCCZ-R2 from Analog Devices is an ultra-low-power 3-axis MEMS accelerometer with 10-bit resolution, built-in activity/inactivity detection, and 270 nA motion-activated wake-up in a WLCSP package.

Key Specifications

Type Ultra-Low-Power 3-Axis MEMS Accelerometer
Measurement Range +/-2g, +/-4g, +/-8g (selectable)
Resolution 12-bit (1 mg/LSB at +/-2g)
Supply Voltage 1.6 V to 3.5 V
Motion-Activated Wake-Up Current 270 nA
Measurement Current 3.6 uA @ 100Hz ODR
Interface SPI (4-wire, 5 MHz max)
Built-in Functions Activity/inactivity, FIFO, peak detection
Package WLCSP-16 (3.25 x 3.25 mm)
Operating Temperature -40C to +85C

Features

  • 270 nA motion-activated wake-up mode
  • 3.6 uA at 100 Hz measurement mode
  • 12-bit resolution at all g-ranges
  • Built-in activity/inactivity detection
  • 512-sample FIFO buffer
  • Instant-on wake-up (no initialization delay)
  • No external clock required

Applications

  • Wearable device motion detection
  • IoT sensor node tilt and impact sensing
  • Medical patient activity monitoring
  • Home automation motion-triggered wake-up
Product Introduction: ADXL362BCCZ-R2 Product Introduction

The ADXL362BCCZ-R2 from Analog Devices is an ultra-low-power 3-axis digital MEMS accelerometer designed for always-on motion sensing applications. The device draws only 270 nA in motion-activated wake-up mode, where it continuously monitors for acceleration exceeding a configurable threshold and generates an interrupt to wake the host MCU. In measurement mode at 100 Hz output data rate, the supply current is just 3.6 uA, enabling battery life measured in years. The 12-bit ADC provides 1 mg/LSB resolution at the +/-2g range. Built-in activity/inactivity detection operates autonomously without MCU intervention, and a 512-sample FIFO reduces the need for frequent SPI reads. The SPI interface operates at up to 5 MHz for efficient data transfer.

Working Principle: ADXL362BCCZ-R2 Working Principle

The ADXL362BCCZ-R2 uses a polysilicon surface-micromachined MEMS sensing element for each axis. The sensing element consists of a proof mass suspended by silicon springs above a fixed electrode plate, forming a differential capacitor. When acceleration is applied along a sensing axis, the proof mass displaces, changing the capacitance between the proof mass and the fixed electrodes. A capacitance-to-voltage converter (C-V) converts this capacitance change to a voltage proportional to acceleration. The voltage is digitized by a 12-bit SAR ADC. The digital filter chain applies anti-aliasing and decimation to achieve the selected output data rate (12.5 Hz to 400 Hz). The activity detection engine continuously compares the acceleration magnitude (or individual axis) against configurable thresholds; when the threshold is exceeded, the activity interrupt fires. The inactivity detection works similarly but triggers when acceleration stays below the threshold for a configurable time. The FIFO buffer stores up to 512 samples, reducing MCU wake-ups and SPI bus traffic. The 270 nA wake-up mode runs only the analog front-end and activity detector, with the digital output and FIFO disabled.

Pin Description: ADXL362BCCZ-R2 Pin Definition and Functions
Pin Name Type Function
Dedicated SCLK/SDO/SDI/CS I/O SPI interface
Dedicated INT1/INT2 Output Programmable interrupt outputs
Dedicated VDD/VS Power 1.6-3.5V supply
Dedicated GND Ground Ground
Application Scenarios: In which products and applications is ADXL362BCCZ-R2 used
  • Wearable fitness tracker step counting with 270nA always-on wake-up
  • IoT door/window sensor with inactivity-based sleep mode
  • Medical patch fall detection with instant-on activity interrupt
  • Smart thermostat occupancy detection via vibration sensing
Alternative Models: What chips are recommended as replacements for ADXL362BCCZ-R2
Manufacturer Part Number Package Notes
ADI ADXL362ACCZ-R5 LGA-16 Same device, LGA package
ST LIS2DH12TR LGA-16 2uA @ 1Hz, I2C/SPI, similar
Bosch BMA456 LGA-12 14uA, step counter, wearable
ST LIS3DHTR LGA-16 2uA @ 1Hz, popular, lower cost
ADI ADXL363BCCZ-R7 WLCSP-16 Same + temperature sensor

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1