Opens in a new tab

AM26C31IDR

Quad RS-422 line driver, 30Mbps, SOIC-16

7654

Effective Inventory

Image for reference only

Manufacturer Part:

AM26C31IDR

Package:

SOIC-16 (10.3 x 7.5 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AM26C31IDR from Texas Instruments is a quadruple differential line driver for RS-422 communication, with 3-state outputs and +/-10kV ESD protection in SOIC-16 package.

Key Specifications

Standard TIA/EIA-422-B
Channels 4 drivers
Data Rate 30 Mbps
Output Voltage +/-2V min differential
Output Short-Circuit Current +/-150 mA
Supply Voltage 5V +/-10%
Supply Current 30 mA typical
Enable Active-high, 3-state output
ESD Protection +/-10 kV HBM on bus pins
Package SOIC-16
Operating Temperature -40 to +85 C

Features

  • 4 independent differential drivers for multi-channel RS-422
  • 30Mbps data rate for high-speed communication
  • 3-state outputs with independent enables for bus sharing
  • +/-10kV ESD protection on bus pins for rugged environments
  • Low skew between drivers for clock/data alignment

Applications

  • RS-422 point-to-point and multi-drop communication
  • Industrial automation fieldbus driver
  • Motor encoder signal transmission
  • CNC machine tool communication interface
  • Building automation RS-422 wiring
Product Introduction: AM26C31IDR Product Introduction

The AM26C31IDR from Texas Instruments is a quadruple differential line driver designed for RS-422 (TIA/EIA-422-B) communication. The device features four independent differential drivers with 3-state outputs, 30Mbps data rate, and +/-10kV HBM ESD protection on bus pins. The differential output voltage of at least +/-2V ensures reliable signal transmission over long cables with noise immunity. The I suffix denotes industrial temperature range, D denotes SOIC-16 package, and R indicates tape and reel packaging.

Working Principle: AM26C31IDR Working Principle

The AM26C31IDR operates as a quadruple differential line driver for RS-422 communication. (1) Each driver converts a single-ended TTL/CMOS logic input into a differential output pair (Y and Z). When the input is high, Y goes high and Z goes low; when the input is low, Y goes low and Z goes high. The differential voltage of at least +/-2V across the twisted-pair cable provides noise immunity in industrial environments. (2) The 3-state output capability is controlled by the active-high enable pins (G and /G). When the enable is de-asserted, both Y and Z outputs enter a high-impedance state, allowing multiple drivers to share the same bus in multi-drop configurations. (3) The low output skew between complementary outputs (Y-Z) and between different drivers minimizes timing jitter in clock distribution and multi-channel data transmission. The +/-10kV ESD protection on bus pins provides robust protection against electrostatic discharge events common in industrial cabling.

Pin Description: AM26C31IDR Pin Definition and Functions
Pin Name Function
1 1A Driver 1 input
2 1Y Driver 1 non-inverting output
3 1Z Driver 1 inverting output
4-5 2A,2Y,2Z Driver 2
6 G Enable (active high, all drivers)
7 /G Enable (active low, all drivers)
8 GND Ground
9 3Z Driver 3 inverting output
10 3Y Driver 3 non-inverting output
11 3A Driver 3 input
12-14 4Z,4Y,4A Driver 4
15 VCC 5V power supply
16 2Z Driver 2 inverting output
Application Scenarios: In which products and applications is AM26C31IDR used
  • RS-422 point-to-point and multi-drop communication for industrial data links
  • Industrial automation fieldbus driver with ESD-protected bus pins
  • Motor encoder differential signal transmission over long cables
  • CNC machine tool communication interface with 4-channel drive
  • Building automation RS-422 wiring with multi-drop capability
Alternative Models: What chips are recommended as replacements for AM26C31IDR
Model Manufacturer Key Difference
AM26LS31CDR TI Lower power, 10Mbps, LS version
SN75174DR TI Pin compatible, similar spec
MC3487DR2G onsemi Pin compatible, equivalent
DS26LS31M TI MIL-STD version
MAX3030ECSA+T ADI RS-422, +/-15kV ESD, SOIC-16

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1