Opens in a new tab

AM26C32IDR

Quad RS-422 line receiver, +/-200mV sensitivity, SOIC-16

6789

Effective Inventory

Image for reference only

Manufacturer Part:

AM26C32IDR

Package:

SOIC-16 (10.3 x 7.5 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AM26C32IDR from Texas Instruments is a quadruple differential line receiver for RS-422 communication, with +/-200mV input sensitivity, 3-state outputs, and fail-safe feature in SOIC-16 package.

Key Specifications

Standard TIA/EIA-422-B / RS-485 compatible
Channels 4 receivers
Data Rate 30 Mbps
Input Sensitivity +/-200 mV
Common-Mode Range +/-15V
Input Impedance 12 kOhm min
Supply Voltage 5V +/-10%
Supply Current 20 mA typical
Enable Active-high, 3-state output
Fail-Safe Open/short input = high output
Package SOIC-16
Operating Temperature -40 to +85 C

Features

  • +/-200mV input sensitivity for reliable signal detection
  • +/-15V common-mode range for noise immunity
  • Fail-safe output: high when inputs are open or shorted
  • 3-state outputs with enable for bus sharing
  • Companion to AM26C31 driver for complete RS-422 link

Applications

  • RS-422 receiver for industrial communication links
  • Motor encoder signal receiver
  • CNC machine tool communication interface
  • Building automation data acquisition
  • Pair with AM26C31 for complete RS-422 transceiver
Product Introduction: AM26C32IDR Product Introduction

The AM26C32IDR from Texas Instruments is a quadruple differential line receiver designed for RS-422 (TIA/EIA-422-B) communication. The device features four independent differential receivers with +/-200mV input sensitivity, +/-15V common-mode range, and a fail-safe feature that sets the output high when inputs are open or shorted. The 3-state outputs are controlled by active-high enable pins, allowing bus sharing in multi-drop configurations. Designed as a companion to the AM26C31 driver, the pair forms a complete RS-422 communication link. The I suffix denotes industrial temperature range, D denotes SOIC-16, and R indicates tape and reel.

Working Principle: AM26C32IDR Working Principle

The AM26C32IDR operates as a quadruple differential line receiver for RS-422 communication. (1) Each receiver converts a differential input signal (A-B) to a single-ended TTL/CMOS logic output. When the differential input exceeds +200mV (A > B), the output goes high; when below -200mV (A < B), the output goes low. This +/-200mV threshold ensures reliable detection even with attenuated signals from long cable runs. (2) The +/-15V common-mode range allows the receiver to reject common-mode noise induced on long cables in industrial environments. The high input impedance (12kOhm minimum) allows multiple receivers to share the same bus without excessive loading. (3) The fail-safe feature ensures that the output defaults to a logic high state when the differential inputs are open (disconnected cable) or shorted together (fault condition). This prevents undefined states in the receiving system and enables cable fault detection. The 3-state outputs allow multiple receivers to share a common data bus.

Pin Description: AM26C32IDR Pin Definition and Functions
Pin Name Function
1 1A Receiver 1 non-inverting input
2 1B Receiver 1 inverting input
3 1Y Receiver 1 output
4 G Enable (active high)
5 /G Enable (active low)
6 2Y Receiver 2 output
7 2B Receiver 2 inverting input
8 GND Ground
9 2A Receiver 2 non-inverting input
10-16 3-4 I/O Receivers 3 and 4
Application Scenarios: In which products and applications is AM26C32IDR used
  • RS-422 receiver for industrial communication links with AM26C31 driver
  • Motor encoder differential signal receiver over long cables
  • CNC machine tool communication receiver interface
  • Building automation data acquisition with multi-drop receivers
  • Complete RS-422 transceiver when paired with AM26C31 driver
Alternative Models: What chips are recommended as replacements for AM26C32IDR
Model Manufacturer Key Difference
AM26LS32ACDR TI Lower power, LS version
SN75175DR TI Pin compatible, similar spec
MC3486DR2G onsemi Pin compatible, equivalent
DS26LS32M TI MIL-STD version
MAX3032ECSA+T ADI RS-422, +/-15kV ESD, SOIC-16

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1