Opens in a new tab

AM26LV31EIDR

Quad RS-422 driver, 3.3V, 32MHz, ±15kV ESD, SOIC-16

8497

Effective Inventory

Image for reference only

Manufacturer Part:

AM26LV31EIDR

Package:

SOIC-16 (9.9 x 6.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AM26LV31EIDR is a quad differential line driver from Texas Instruments with ±15 kV IEC ESD protection. Operating from a single 3.3V supply, it meets TIA/EIA-422-B standards, supports up to 32 MHz switching rate, and provides controlled rise/fall times for balanced bus transmission in a 16-pin SOIC package.

Key Specifications

Drivers / Receivers 4 / 0
Protocol RS-422 / RS-485
Supply Voltage 3.0 V to 3.6 V (3.3 V nominal)
Switching Rate Up to 32 MHz
Propagation Delay 8 ns typical
Pulse Skew 500 ps typical
Output Drive Current ±30 mA
Differential Output Voltage 2.6 V typical (100 Ω load)
Rise/Fall Time 5 ns typical (controlled)
ESD Protection ±15 kV HBM, ±8 kV IEC contact, ±15 kV IEC air gap
Operating Temperature -40°C to +85°C
Package SOIC-16 (D)

Features

  • Meets TIA/EIA-422-B and ITU V.11 standards
  • 3.3V single supply operation
  • ±15 kV IEC ESD protection on bus pins
  • 32 MHz maximum switching rate
  • 8 ns typical propagation delay
  • 500 ps typical pulse skew
  • ±30 mA output drive current
  • Controlled 5 ns rise and fall times
  • 5V logic input compatible with 3.3V supply
  • Three-state outputs
  • Glitch-free power-up/power-down
  • Short-circuit protection on driver outputs

Applications

  • RS-422 balanced bus transmission
  • Industrial communication networks
  • Motor encoder interfaces
  • Point-to-point and multidrop data links
  • Backplane transceiver logic
Product Introduction: AM26LV31EIDR Product Introduction

The AM26LV31E is a quad differential line driver with three-state outputs and ±15 kV IEC ESD protection from Texas Instruments. It is designed for balanced bus transmission at switching rates up to 32 MHz, meeting or exceeding TIA/EIA-422-B and ITU V.11 requirements. The driver operates from a single 3.3 V supply while accepting 5 V logic inputs. Features include 8 ns propagation delay, 500 ps pulse skew, ±30 mA output drive, and controlled 5 ns rise/fall times for minimized EMI. The device supports Ioff partial power-down mode operation and provides glitch-free power-up/power-down protection with driver output short-circuit protection.

Working Principle: AM26LV31EIDR Working Principle

The AM26LV31E contains four independent differential line drivers. Each driver accepts a single-ended logic input and produces a complementary pair of output signals (Y and Z) with controlled transition times. When the driver enable is active, the input is converted to a differential current drive of ±30 mA into a balanced load. The controlled 5 ns rise/fall times minimize EMI and reflections on twisted-pair transmission lines. The 3.3 V supply powers an internal reference and bias network that sets the output common-mode voltage and drive current. The three-state outputs go high-impedance when the enable pin is deasserted. The ESD protection clamps on the bus pins absorb transient energy from electrostatic discharge events up to ±15 kV (HBM and IEC air gap) and ±8 kV (IEC contact). The Ioff feature ensures the outputs remain in a known state during partial power-down.

Pin Description: AM26LV31EIDR Pin Definition and Functions
Pin Name Type Description
1 1Y Output Driver 1 non-inverting output
2 1Z Output Driver 1 inverting output
3 2Y Output Driver 2 non-inverting output
4 2Z Output Driver 2 inverting output
5 GND Power Ground
6 3Y Output Driver 3 non-inverting output
7 3Z Output Driver 3 inverting output
8 4Y Output Driver 4 non-inverting output
9 4Z Output Driver 4 inverting output
10 4A Input Driver 4 input
11 3A Input Driver 3 input
12 G Input Enable input (active high)
13 2A Input Driver 2 input
14 1A Input Driver 1 input
15 VCC Power Supply voltage (3.0-3.6V)
16 GND Power Ground
Application Scenarios: In which products and applications is AM26LV31EIDR used
  • Industrial Communication: RS-422 bus transmission up to 32 MHz for high-speed factory automation networks
  • Motor Encoder Interface: Differential driver for transmitting quadrature encoder signals over long cables
  • Multidrop Data Links: ±15 kV ESD protection ensures robustness in multi-node RS-422 networks
  • Backplane Signaling: Controlled 5 ns rise/fall times minimize reflections on PCB backplanes
  • 5V/3.3V Mixed Systems: 5V logic input compatible with 3.3V supply bridges voltage domains
Alternative Models: What chips are recommended as replacements for AM26LV31EIDR
Model Manufacturer Key Difference Package Speed
AM26LV31EIPWR TI TSSOP-16 package option for space-constrained board layouts TSSOP-16 32Mbps
AM26LV31EIRGYR TI VQFN-16 package (4×3.5mm) for minimal footprint ultra-compact designs VQFN-16 32Mbps
SN65LV31DW TI Similar quad RS-422 driver in SOIC-16, 3.3V supply with IEC ESD protection SOIC-16 32Mbps
MC3487DR2G onsemi 5V RS-422 quad driver for legacy 5V systems with separate enable controls SOIC-16 10Mbps
DS26LV31TMX MaxLinear 3.3V RS-422 quad driver with similar pinout and ESD protection rating SOIC-16 32Mbps
SN65HVD31DR TI Enhanced version with ±16kV IEC ESD and extended common-mode range for industrial SOIC-16 32Mbps

The AM26LV31E is a 3.3V quad RS-422 differential line driver with individual driver enables. For 5V systems, the MC3487 provides equivalent functionality. The SN65HVD31 offers enhanced ESD protection for harsh industrial environments.

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1