Opens in a new tab

AT42QT2640-AUR

Capacitive touch controller, 64 channels, QTouch ADC, UART/SPI host

3037

Effective Inventory

Image for reference only

Manufacturer Part:

AT42QT2640-AUR

Package:

See datasheet

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

AT42QT2640-AUR is a 24-key QTouch touch controller with I2C/SPI interface, spread spectrum for EMI, QFN-28 package.

Key Specifications

Function QTouch touch controller
Keys 24
Interface I2C / SPI
Supply Voltage 1.62V to 3.6V
Sensing Method Projected capacitive
Package QFN-28
Features Spread spectrum, auto-calibration

Features

  • 24-key projected capacitive touch
  • I2C and SPI interface support
  • Spread spectrum for EMI reduction
  • Auto-calibration and drift compensation
  • Low power mode for battery applications

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: AT42QT2640-AUR Product Introduction

AT42QT2640-AUR is a 24-key QTouch touch controller with I2C/SPI interface, spread spectrum for EMI, QFN-28 package.

Working Principle: AT42QT2640-AUR Working Principle

The AT42QT2640-AUR is a Microchip/Atmel touch controller or microcontroller. For touch variants, capacitive sensing measures charge transfer between a sense electrode and a reference, detecting finger proximity as a capacitance increase. A sigma-delta CSD (Capacitive Sigma Delta) algorithm converts the capacitance change to a digital count. For MCU variants, an ARM or AVR core executes application firmware with integrated peripherals for GPIO, timers, and communication.

Pin Description: AT42QT2640-AUR Pin Definition and Functions
Pin Group Name Description
I/O Signal pins Primary signal interface pins
Power VCC/VDD Supply voltage pins
Ground GND/VSS Ground reference pins
Control EN, RST, CS Enable, reset, and chip select controls
Application Scenarios: In which products and applications is AT42QT2640-AUR used
  • Capacitive touch user interfaces
  • Consumer appliance controls
  • Industrial HMI panels
  • Access control and security
Alternative Models: What chips are recommended as replacements for AT42QT2640-AUR
Model Manufacturer Key Difference
TLC3702 TI Dual comparator, similar function
MAX809 Maxim Voltage supervisor alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1