Opens in a new tab

AT73C246

PMU + stereo audio codec, 2x DCDC buck (600mA), 4x LDO, 100dB DAC, 96dB ADC, 60mW headphone amp, I2S/TWI, RTC, 10-bit ADC, QFN-64, Atmel AT73C246.

1800

Effective Inventory

Image for reference only

Manufacturer Part:

AT73C246

Package:

QFN-64 (7.5×7.5×0.9mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AT73C246 is a highly integrated Power Management Unit (PMU) with stereo audio codec from Atmel (now Microchip), specifically designed for advanced application processors and multimedia systems requiring complex low-voltage power supplies and high-quality audio. The device integrates two high-efficiency DC-DC buck converters and four low-noise LDO regulators, providing precisely calibrated voltage rails for MCU cores, I/O, memory, and analog/RF sections. The integrated stereo audio codec features a 96dB dynamic range stereo ADC and a 100dB dynamic range stereo DAC, with a 60mW stereo headphone amplifier capable of directly driving 16Ω/32Ω headphones. The audio section supports multiple input sources including two microphones, line-in, and auxiliary input, with bypass/sidetone modes for low-power analog audio paths. Additional features include a real-time clock (RTC) with backup battery charger, a 10-bit SAR ADC with multiplexed inputs for voltage monitoring, and flexible power management with standby mode and wake-up functionality. Controlled via a two-wire interface (TWI/I2C) for PMU and I2S for digital audio, the AT73C246 is ideally suited for Atmel AT91SAM9 and AT91CAP9 ARM9-based multimedia systems, significantly reducing BOM cost and board space compared to discrete solutions.

Key Specifications

Parameter Conditions Min Typ Max Unit
Input Voltage Range (VIN) 2.9 5.5 V
DC-DC Buck 0 (BUCK0) CORE+MEM 0.8 1.8 3.6 V
BUCK0 Output Current 600 mA
DC-DC Buck 1 (BUCK1) CORE 0.8 1.2 3.6 V
BUCK1 Output Current 600 mA
LDO2 Output CORE, 50mV steps 0.8 1.0 1.9 V
LDO2 Output Current 300 mA
LDO3 Output I/O, 50mV steps 2.7 3.3 3.6 V
LDO3 Output Current 200 mA
LDO4 Output AUDIO CODEC, 50mV steps 2.7 3.3 3.6 V
LDO4 Output Current 200 mA
LDO5 (Backup) Output RTC supply 2.5 V
LDO5 Output Current 10 mA
Backup Battery Charger Rechargeable coin cell Integrated
Switching Frequency DCDC converters 1800 2000 2200 kHz
OFF Mode Current RTC running 20 40 μA
RUN Mode Current All DCDC + LDO on 7 15 mA
STANDBY Mode Current 310 500 μA
Audio DAC Dynamic Range 100 dB
Audio ADC Dynamic Range 96 dB
Headphone Output Power 16Ω load 60 mW
Audio Sampling Rates 8 to 96 kHz (9 rates)
Audio Interface I2S (Master/Slave)
Control Interface TWI (I2C compatible)
SAR ADC 10-bit, 300kS/s 4 ext + 6 int channels
ADC Resolution 10-bit
RTC Crystal Oscillator 32.768kHz <1 μA
Wake-up Inputs 4 wake-up pins + RTC alarm
Reset Generator POR + BOD + External reset
Embedded LDO VPAD output 3.3 V
Operating Temperature -40 +85 °C
Package QFN-64 (7.5 x 7.5 x 0.9mm), exposed pad

Features

  • Highly integrated PMU + stereo audio codec in single chip
  • 2.9V to 5.5V wide input voltage range
  • Two high-efficiency DC-DC buck converters (0.8-3.6V, 600mA each)
  • Four low-noise LDO regulators with 50mV voltage steps
  • Backup battery charger and RTC supply LDO (2.5V, 10mA)
  • Automatic voltage scaling (DVS) for power optimization
  • Fast transient response on all supply channels
  • Over-current protection and over-temperature detection
  • 100dB dynamic range stereo audio DAC
  • 96dB dynamic range stereo audio ADC
  • 60mW stereo headphone amplifier (capless option)
  • Multiple audio inputs: 2x mic, line-in, aux-in
  • Analog bypass and sidetone modes for low power
  • I2S digital audio interface (Master/Slave)
  • TWI (I2C) control interface
  • 10-bit SAR ADC with 10-channel multiplexer
  • Low-power RTC with programmable alarm wake-up
  • Flexible standby and power-down modes
  • 20μA typical OFF mode current
  • QFN-64 7.5×7.5mm compact package
  • Reduces board space by 30% vs discrete solutions

Applications

  • Portable media players and MP3 players
  • Smartphones and handheld devices
  • ARM9-based multimedia systems (AT91SAM9, AT91CAP9)
  • Portable navigation devices
  • Digital cameras and camcorders
  • Wireless audio and Bluetooth speakers
  • Tablet PCs and eBook readers
  • Portable medical devices
  • Industrial handheld terminals
  • Battery-powered multimedia devices
Product Introduction: AT73C246 Product Introduction

The AT73C246 is a highly integrated Power Management Unit (PMU) with stereo audio codec from Atmel (now Microchip Technology), designed to provide a complete power and audio solution for advanced application processor-based multimedia systems. The device integrates two high-efficiency DC-DC buck converters (BUCK0 and BUCK1) each delivering up to 600mA with output voltages programmable from 0.8V to 3.6V in 50mV steps, ideal for powering MCU cores and DDR memory. Additionally, four low-noise LDO regulators provide clean power for I/O interfaces, audio codec circuits, and analog/RF sections. A dedicated backup LDO (2.5V, 10mA) with rechargeable backup battery support and RTC function ensures timekeeping during power loss. The integrated stereo audio codec delivers exceptional audio quality with a 100dB dynamic range DAC and 96dB dynamic range ADC, supporting sampling rates from 8kHz to 96kHz. The 60mW headphone amplifier can directly drive 16Ω/32Ω headphones with a capless option that eliminates the need for large coupling capacitors. Multiple audio inputs including dual microphones, line-in, and auxiliary input are supported, with analog bypass and sidetone modes for low-power operation. A 10-bit SAR ADC with 10 multiplexed channels (4 external, 6 internal) enables voltage monitoring and measurement functions. The AT73C246 is controlled via a TWI (I2C) interface for power management and I2S interface for digital audio. With its high level of integration, the device reduces system BOM cost, board space, and power consumption while enhancing audio quality. Packaged in a compact QFN-64 (7.5×7.5mm), the AT73C246 is perfectly suited for Atmel AT91SAM9 and AT91CAP9 ARM9-based systems and other portable multimedia applications.

Working Principle: AT73C246 Working Principle

The AT73C246 operates as a complete power management and audio subsystem, receiving a single input voltage from 2.9V to 5.5V and generating multiple regulated output rails while providing high-quality audio input/output. The power management unit (PMU) consists of two synchronous buck DC-DC converters operating at approximately 2MHz switching frequency, providing high efficiency conversion for high-current loads like MCU cores and memory. These buck converters feature automatic voltage scaling (DVS) capability that allows software to dynamically adjust output voltages for power optimization. Four low-dropout (LDO) regulators provide clean, low-noise supplies for sensitive analog circuits, I/O interfaces, and the audio codec. LDO5 is dedicated to RTC and backup battery charging, maintaining real-time clock operation and providing wake-up capability even in OFF mode (20μA typical current). The audio codec section operates independently, receiving digital audio via the I2S interface and converting it through a high-quality DAC before amplification by the headphone driver. On the input side, multiple analog sources (microphones, line-in, aux-in) are multiplexed into the stereo ADC for digital conversion. Bypass and sidetone modes allow direct analog paths from input to output, reducing power consumption when digital processing is not needed. The 10-bit SAR ADC with analog multiplexer provides voltage monitoring capability for system diagnostics. The entire device is configured and controlled through the TWI (I2C) serial interface, with flexible power state management including RUN, STANDBY, and OFF modes.

Pin Description: AT73C246 Pin Definition and Functions

The AT73C246 is available in a 64-pin QFN package (7.5×7.5×0.9mm) with exposed pad. Major pin groups include:

Pin Group Description
Power Input Pins VINSYS (main input 2.9-5.5V), VIN0/VIN1 (buck inputs), VIN2-VIN4 (LDO inputs), AGND, DGND, GNDSYS, GND0/GND1 (power ground)
DC-DC Buck 0 SW0 (switch node), VFB0 (feedback)
DC-DC Buck 1 SW1 (switch node), VFB1 (feedback)
LDO Outputs VDD2 (LDO2, 1V/300mA), VDD3 (LDO3, 3.3V/200mA I/O), VDD4 (LDO4, 3.3V/200mA audio), VBACKUP (LDO5, 2.5V/10mA RTC)
Audio Inputs MICL/MICR (microphone left/right), LINL/LINR (line in left/right), AUXL/AUXR (auxiliary left/right)
Audio Outputs HPL/HPR (headphone left/right), HPVCM (headphone VCM buffer)
Digital Audio MCLK (master clock), LRFS (frame sync), BCLK (bit clock), DAI (data in), DAO (data out) – I2S interface
Control Interface TWD (TWI data), TWCK (TWI clock) – I2C compatible
RTC / Clock XIN, XOUT (32.768kHz crystal)
Reset / Interrupt RSTB (reset), ITB (interrupt output), HRST (hard reset)
Wake-up Inputs WAKEUP0, WAKEUP1, WAKEUP2, WAKEUP3
ADC Inputs ANA0, ANA1, ANA2, ANA3 (auxiliary analog inputs)
Reference / Bias VBG (bandgap), REXT (bias resistor), MICBIAS (mic bias)
VPAD 3.3V pad supply output from embedded LDO
Exposed Pad Must be soldered to GND for thermal and electrical performance
Application Scenarios: In which products and applications is AT73C246 used
  • Portable media players and digital audio players
  • Smartphones and feature phones
  • ARM9-based multimedia systems (AT91SAM9, AT91CAP9)
  • Portable GPS and navigation devices
  • Digital cameras and camcorders
  • Tablet PCs and eBook readers
  • Bluetooth speakers and wireless audio devices
  • Portable medical instruments
  • Industrial handheld terminals
  • Wearable multimedia devices
Alternative Models: What chips are recommended as replacements for AT73C246
Model Manufacturer Key Difference
AT73C213 Atmel Simpler audio codec, fewer power channels
AT73C240 Atmel Audio codec + PMU, different feature set
WM8994 Cirrus Logic Audio codec with integrated class W headphone amp
ACT8846 Active-Semi Multi-channel PMIC for application processors
TPS65053 Texas Instruments PMIC with 2 DCDC + 3 LDO

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1