Opens in a new tab

AT91SAM7X256C-AU

ARM7TDMI MCU, 55MHz, 256KB Flash, 64KB SRAM, Ethernet MAC, USB, CAN, LQFP-100

3752

Effective Inventory

Image for reference only

Manufacturer Part:

AT91SAM7X256C-AU

Package:

LQFP-100

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AT91SAM7X256C-AU from Microchip Technology is a 32-bit ARM7TDMI-based microcontroller with 256KB Flash, 64KB SRAM, and a rich peripheral set including Ethernet MAC 10/100, USB 2.0 Full Speed, CAN 2.0A/B, and multiple serial interfaces. Operating at up to 55MHz, it is housed in a 100-pin LQFP package and targets industrial and embedded networking applications.

Key Specifications

Core ARM7TDMI (32-bit)
Max Clock Frequency 55 MHz
Flash Memory 256 KB
SRAM 64 KB
I/O Pins 62
USB 2.0 Full Speed Device
Ethernet MAC 10/100
CAN 2.0A and 2.0B
USART/UART 3 (2 USART + 1 UART)
SPI 2
TWI (I2C) 1
ADC 8-channel, 10-bit
Core Supply 1.8V (internal regulator)
I/O Supply 1.8V or 3.3V (5V tolerant)
Operating Temperature -40°C ~ 85°C
Package LQFP-100
Part Status In Production

Features

  • 32-bit ARM7TDMI RISC processor at 55MHz
  • Integrated Ethernet MAC 10/100 with DMA
  • USB 2.0 Full Speed device port
  • CAN 2.0A and 2.0B compliant controller
  • Integrated voltage regulator allows single 3.3V supply
  • 5V-tolerant I/O pins
  • 8-channel 10-bit ADC
  • Three 16-bit timers, RTT, and watchdog
  • SSC (Synchronous Serial Controller)
  • Pre-programmed bootloader from USB or UART

Applications

  • Industrial networking and Ethernet-enabled devices
  • Building automation and HVAC controllers
  • CAN bus applications in automotive and industrial
  • USB-enabled embedded systems
  • Point-of-sale terminals and gateways
Product Introduction: AT91SAM7X256C-AU Product Introduction

The AT91SAM7X256C-AU is a member of Microchip’s SAM7X series of 32-bit microcontrollers based on the ARM7TDMI processor. Operating at up to 55MHz, it features 256KB of Flash memory and 64KB of SRAM. The device integrates a comprehensive peripheral set including an Ethernet MAC 10/100 port with DMA, a USB 2.0 Full Speed device port, a CAN 2.0A/B compliant controller, two SPIs, two USARTs, one UART, one TWI (I2C), an SSC, three 16-bit timers, a Real-Time Timer (RTT), and an 8-channel 10-bit ADC. The integrated voltage regulator allows single 3.3V supply operation, with the core running at 1.8V internally. The I/O pins are 5V tolerant, supporting mixed-voltage system designs. A pre-programmed bootloader supports firmware upload via USB or UART interfaces.

Working Principle: AT91SAM7X256C-AU Working Principle

The AT91SAM7X256C-AU is built around the ARM7TDMI 32-bit RISC processor core with a 3-stage pipeline executing 32-bit ARM and 16-bit Thumb instruction sets. The Advanced Peripheral Bus (APB) and Advanced High-performance Bus (AHB) connect the processor to peripherals and memory through a DMA controller for efficient data transfer. The Ethernet MAC interfaces to an external PHY via MII/RMII, handling all MAC layer functions including CRC generation and address filtering. The CAN controller manages message filtering, bit timing, and error handling according to CAN 2.0A/B specifications. The USB device controller handles all USB protocol layers including packet formatting, CRC, and endpoint management. The ADC uses a successive approximation register (SAR) architecture with 10-bit resolution.

Pin Description: AT91SAM7X256C-AU Pin Definition and Functions
Pin Name Type Description
1-16 PA0-PA15 I/O Port A I/O (multiplexed with peripheral functions)
17-32 PA16-PA31 I/O Port A I/O (Ethernet, USB, SPI)
33-48 PB0-PB15 I/O Port B I/O (CAN, USART, ADC)
49-64 PB16-PB31 I/O Port B I/O (timer, TWI, SSC)
65 VDDCORE PWR Core power supply (1.8V from internal regulator)
66 VDDIO PWR I/O power supply (1.8V or 3.3V)
67 GND GND Ground
68 VDDIN PWR Main supply input (3.3V)
69 TST I Test mode select
70 NRST I System reset (active low)
71 TCK I JTAG test clock
72 TMS I JTAG test mode select
73 TDI I JTAG test data input
74 TDO O JTAG test data output
75-100 Misc PWR/GND Power, ground, and analog reference pins
Application Scenarios: In which products and applications is AT91SAM7X256C-AU used
  • Industrial Ethernet: Embedded web servers and Modbus/TCP gateways with integrated MAC
  • CAN Networks: Automotive and industrial bus controllers with CAN 2.0B support
  • USB Peripherals: Custom USB device classes for data acquisition and control
  • Building Automation: HVAC controllers combining Ethernet, CAN, and serial interfaces
  • POS Systems: Point-of-sale terminals requiring Ethernet and USB connectivity
Alternative Models: What chips are recommended as replacements for AT91SAM7X256C-AU
Model Manufacturer Key Difference
AT91SAM7X256C-AUR Microchip Tape & Reel packaging variant
AT91SAM7X128C-AU Microchip 128KB Flash, 32KB SRAM, lower cost
AT91SAM7A3C-AU Microchip No Ethernet, more CAN channels
SAM4E16E Microchip Cortex-M4, 120MHz, Ethernet+CAN, pin-rich
STM32F107VCT6 STMicroelectronics Cortex-M3, Ethernet, CAN, 72MHz

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1