Opens in a new tab

BC856BS,115

Dual PNP transistor, 65V/100mA, hFE 125-500, SOT363, low noise, Nexperia BC856BS

25000

Effective Inventory

{"AIGC":{"Label":1,"ContentProducer":"001191350200MA31G8XQ5H10000","ProduceID":"37583055951873122","ContentPropagator":"001191350200MA31G8XQ5H20000","PropagateID":"37583055951873122"}}

Image for reference only

Manufacturer Part:

BC856BS,115

Package:

SOT363 (SC-88 / TSSOP-6), 6-Pin, 2.0mm × 1.25mm × 0.95mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BC856BS is a dual PNP bipolar junction transistor (BJT) from Nexperia, packaged in a compact SOT363 (SC-88) surface-mount device. This device contains two independent PNP transistors designed for general-purpose amplification and switching applications, featuring a 65V collector-emitter voltage rating and 100mA continuous collector current per transistor. With low saturation voltage and high current gain (hFE 125-500), the BC856BS is suitable for low-noise amplification, signal switching, and load driving applications. The two transistors in the same package provide excellent parameter matching for differential amplifier and current mirror designs. Supplied in 7″ tape and reel packaging with 3,000 pieces per reel, the BC856BS is widely used in consumer electronics, industrial controls, automotive systems, and telecommunications equipment.

Key Specifications

Parameter Value
Manufacturer Nexperia
Transistor Type Dual PNP Bipolar Junction Transistor (BJT)
Configuration 2 independent PNP transistors (no internal connection)
VCEO (Collector-Emitter Voltage) 65 V
VCBO (Collector-Base Voltage) 65 V
VEBO (Emitter-Base Voltage) 5 V
IC Continuous Collector Current 100 mA per transistor
ICM Peak Collector Current 200 mA
PT Total Power Dissipation 200 mW (total, T ≤ 25°C)
hFE DC Current Gain (typ) 220 (range: 125 – 500) @ IC=10mA
VCE(sat) Saturation Voltage 200 mV max @ IC=10mA, IB=0.5mA
VBE(on) On-State Voltage 730 mV max @ IC=10mA, VCE=5V
fT Transition Frequency 100 MHz typ @ IC=10mA
Cob Output Capacitance 3.0 pF typ @ VCB=10V
Noise Figure 4 dB typ @ IC=0.2mA
Operating Junction Temperature -55°C to +150°C
Storage Temperature -55°C to +175°C
Package / Case SOT363 (SC-88 / TSSOP-6), 6-pin
Package Dimensions 2.0mm × 1.25mm × 0.95mm
Marking Wt%
Packaging Tape & Reel, 3,000 pcs/reel (7″ reel)

Features

  • Dual independent PNP transistors in single package
  • 65V VCEO rating
  • High current gain: hFE 125-500 (220 typical)
  • Low saturation voltage: VCE(sat) ≤ 200mV
  • Low noise figure: 4dB typical
  • 100MHz transition frequency
  • Good parameter matching between two transistors
  • Compact SOT363 (SC-88) surface-mount package
  • Low profile TSSOP-6 footprint
  • Lead-free and RoHS compliant
  • Halogen-free and antimony-free
  • Wide operating temperature: -55°C to +150°C
  • Suitable for general-purpose amplification
  • Ideal for differential amplifiers and current mirrors
  • Compatible with reflow soldering

Applications

  • General-purpose amplification and switching
  • Differential amplifiers and operational amplifier input stages
  • Current mirrors and current sources
  • Signal switching and routing
  • Load driving and relay control
  • Audio preamplification
  • Consumer electronics and appliances
  • Industrial control systems
  • Telecommunications equipment
  • Automotive electronics
Product Introduction: BC856BS,115 Product Introduction

The BC856BS,115 from Nexperia is a dual PNP bipolar junction transistor in the compact SOT363 surface-mount package, offering two independent PNP transistors in a space-saving 6-lead configuration. Designed for general-purpose amplification and switching applications, each transistor features a 65V collector-emitter voltage rating and 100mA continuous collector current capability. The high current gain (hFE of 220 typical, ranging from 125 to 500) makes the BC856BS suitable for low-level signal amplification, while the low saturation voltage (200mV max) ensures efficient switching operation. A key advantage of the dual-transistor configuration is the excellent parameter matching between the two transistors, which is particularly beneficial for differential amplifier input stages, current mirrors, and matched pair circuits. With a low noise figure of 4dB typical and 100MHz transition frequency, these transistors deliver good RF and audio performance. The 200mW total power dissipation rating provides adequate thermal margin for most low-power applications. The SOT363 package measures just 2.0mm × 1.25mm × 0.95mm, saving valuable board space in high-density designs. Supplied in 7″ tape-and-reel packaging with 3,000 pieces per reel, the BC856BS is widely used in consumer electronics, telecommunications equipment, industrial control systems, and automotive electronics where reliable, low-cost PNP transistor performance is required.

Working Principle: BC856BS,115 Working Principle

The BC856BS contains two independent PNP bipolar junction transistors fabricated on the same silicon die and housed in a single SOT363 package. Each PNP transistor consists of three semiconductor regions — an n-type base between two p-type regions (emitter and collector). When the emitter-base junction is forward biased (emitter more positive than base by approximately 0.7V) and the collector-base junction is reverse biased (base more positive than collector), current flows from the emitter to the collector, controlled by the base current. The current gain (β or hFE) is the ratio of collector current to base current — with a typical hFE of 220, a small base current controls a much larger collector current. In the active region (forward-biased EB junction, reverse-biased CB junction), the transistor behaves as a current-controlled current source, suitable for amplification. In saturation (both junctions forward biased), the collector-emitter voltage drops to a low value (VCE(sat) ≤ 200mV), making the transistor act as a closed switch suitable for digital switching and load driving. Because both transistors are fabricated on the same die using identical processes, their electrical parameters (particularly VBE and hFE) are closely matched — a critical requirement for precision circuits like differential amplifiers and current mirrors where matching determines accuracy and thermal stability. The transition frequency (fT = 100MHz typical) indicates the frequency at which the current gain drops to unity, setting the upper limit for useful amplification. The low noise figure makes these transistors suitable for low-level signal preamplification.

Pin Description: BC856BS,115 Pin Definition and Functions
Pin Name Type Description
1 Collector 1 Power Collector of PNP transistor #1
2 Base 1 Input Base of PNP transistor #1 — control terminal
3 Emitter 1 Power Emitter of PNP transistor #1 — highest potential in normal operation
4 Emitter 2 Power Emitter of PNP transistor #2 — highest potential in normal operation
5 Base 2 Input Base of PNP transistor #2 — control terminal
6 Collector 2 Power Collector of PNP transistor #2

Marking: “Wt%” (where % is the lot/batch code) is printed on the SOT363 package top surface. Pin 1 is identified by a beveled corner. The two PNP transistors are completely independent with separate base, emitter, and collector connections — no internal connection exists between the two transistors. For PNP transistors, the emitter is at the highest potential and current flows from emitter to collector when the base is pulled below the emitter voltage.

Application Scenarios: In which products and applications is BC856BS,115 used
  • Differential Amplifiers: The matched pair configuration is ideal for differential amplifier input stages in op-amps, instrumentation amplifiers, and precision measurement circuits where VBE matching and thermal tracking are critical
  • Current Mirrors and Sources: Used to build current mirrors and programmable current sources for biasing circuits, current sources, and active loads in analog IC design
  • Audio Preamplification: Suitable for low-level audio signal amplification in microphones, headphone amps, and audio preamps due to low noise and good gain
  • Signal Switching: Serves as an analog switch or signal router in communication systems, test equipment, and data acquisition circuits
  • Load Driving and Relay Control: Used to drive small relays, LEDs, and other low-current loads where PNP high-side switching is needed
  • Consumer Electronics: Found in TVs, audio equipment, DVD players, and home appliances for general signal processing and switching
  • Telecommunications: Used in telecom equipment, modems, and networking devices for line driving, signal amplification, and level shifting
  • Automotive Electronics: Deployed in automotive body electronics, sensor interfaces, and control modules for various amplification and switching tasks
Alternative Models: What chips are recommended as replacements for BC856BS,115
Model Manufacturer Config VCEO IC Package
BC856BS Nexperia Dual PNP 65V 100mA SOT363
BC846BS Nexperia Dual NPN 65V 100mA SOT363 (NPN complement)
BCP56-16 Nexperia Single PNP 80V 1A SOT223 (higher power)
MMDT5551 Onsemi/Diodes Dual NPN 160V 500mA SOT-363
FMMT558 Diodes Inc Single PNP 150V 500mA SOT-23

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1